Honeywell INNCOM E528.4G Manuale utente

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Honeywell Termostato

Honeywell

Honeywell rth230b Manuale utente

Honeywell

Honeywell T8034C Manuale utente

Honeywell

Honeywell Thermostats Guida utente

Honeywell

Honeywell RTH7400 series Manuale utente

Honeywell

Honeywell RTH111 series Manuale utente

Honeywell

Honeywell FocusPRO 5000 Series Manuale utente

Honeywell

Honeywell PRO TH1000 Series Manuale utente

Honeywell

Honeywell TP9600 Series Manuale utente

Honeywell

Honeywell VisionPRO IAQ Manuale utente

Honeywell

Honeywell Easy-To-See POWERPILE TS86A Istruzioni per il montaggio

Honeywell

Honeywell PRO 1000 Manuale utente

Honeywell

Honeywell Versaguard TG509F Manuale utente

Honeywell

Honeywell WebStat T7350 Manuale del proprietario

Honeywell

Honeywell CT3600 Manuale utente

Honeywell

Honeywell RTH4300B Manuale utente

Honeywell

Honeywell Home Pro Series Manuale utente

Honeywell

Honeywell RTH6400 Series Manuale utente

Honeywell

Honeywell CM707 Istruzioni per l'installazione

Honeywell

Honeywell CM61 Manuale utente

Honeywell

Honeywell PRO TH4210D Manuale utente

Honeywell

Honeywell T841A Manuale utente

Honeywell

Honeywell TL6120 Manuale utente

Honeywell

Honeywell Wi-Fi VisionPRO 8000 series Manuale utente

Honeywell

Honeywell TB7600 Manuale per l'uso e la cura

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente

Aube Technologies

Aube Technologies TH305 Manuale utente

Powtier Controls

Powtier Controls 505MST Manuale utente

Kanmor

Kanmor Zone Control 369e Manuale utente

Page 1 - Set RID, PAN ID and RF Channel in E528.4G and E527.4G

Set Room ID, PAN ID and RF Channel in INNCOM

E528.4G and E527.4G Thermostats

Enter Service Mode

Service mode is accessed by executing the following button sequence:

1. Press and hold F/C.

2. Press and release OFF/AUTO.

3. Press and release DISPLAY.

4. Release F/C.

The LCD display will now read “rid” confirming that you are in service mode.

Set Room ID

A unique 5-digit Room ID is required in each INNCOM thermostat.

Enter Service Mode and follow the procedure below to set the Room ID of the thermostat.

1. Scroll to rId

2. Press DISPLAY button and the current Room ID will scroll on the display.

3. After the Room ID scrolls, the highest digit of the Room ID will be displayed with the

HI fan indicator. Use the up or down arrow buttons to change the value and press

OFF/AUTO.

4. The next 2 digits of the Room ID are now displayed along with the MED fan indicator.

Use the up or down arrow buttons to change the value and press OFF/AUTO.

5. The last 2 digits of the Room ID are now displayed along with the LO fan indicator

Use the up or down arrow buttons to change the value and press OFF/AUTO.

6. Press the DISPLAY button to store the new Room ID. The new Room ID will scroll

across the display.

Example of RID for Room 515 (00515)

Page 2 - Set RID, PAN ID and RF Channel in E528.4G and E527.4G

Set PAN ID

PAN ID is the Personal Area Network ID of the thermostat. The PAN ID is used in networked

systems where the PAN ID of the thermostat must match the PAN ID of the router it is

assigned to.

Enter service mode and follow the procedure below to set the PAN ID in the thermostat

1. In Service Mode, go to PAn and press DISPLAY to view the value.

2. Change the displayed value to the assigned PAN ID and press the DISPLAY button to

set. The thermostat will beep to indicate the value has been entered.

Set RF Channel

The RF channel is used for both in-room RF communication and RF network

communication. In most cases the default RF channel of 26 will be used. In networked

systems, the RF channel in the thermostat must match the RF channel in the router it is

assigned to.

Enter service mode and follow the procedure below to set the RF Channel in the thermostat

1. In Service Mode, go to rf and press DISPLAY to view the value.

2. Change the displayed value to the assigned RF channel and press the DISPLAY

button to set. The thermostat will beep to indicate the value has been entered.

Exit Service Mode

Press F/C to exit service mode. You may need to press F/C multiple times to fully exit

from submenus within service mode.