Honeywell RCT8100 Manuale utente
RCT8100
Programmable Thermostat
Operating
Manual
69-2337EF-01
69-2337EF-01.book Page -1 Friday, May 25, 2012 2:24 PM
Need Help?
For assistance with this product please visit http://yourhome.honeywell.com
or call Honeywell Customer Care toll-free at 1-800-468-1502.
Read and save these instructions.
® U.S. Registered Trademark. Patents pending.
© 2012 Honeywell International Inc. All rights reserved.
CAUTION: EQUIPMENT DAMAGE HAZARD
To prevent possible compressor damage, do not use Cooling mode when the outdoor
temperature is below 50 °F (10 °C).
69-2337EF-01.book Page 0 Friday, May 25, 2012 2:24 PM
RCT8100 Programmable Thermostat
About your new thermostat
Thermostat features ..................................... 2
Early Start .................................................... 3
Compressor protection ................................. 3
Quick reference to controls........................... 4
Quick reference to display ............................ 5
Quick start .................................................... 6
Programming & Operation
Set the clock................................................. 7
Select system setting (Heat/Cool) ................ 8
Select fan setting (Auto/On) ......................... 9
Using the schedule................................ 10-13
Temporary schedule override ..................... 14
Permanent schedule override..................... 15
Appendices
Filter replacement........................................16
Battery replacement ....................................17
In case of difficulty.......................................18
Customer assistance...................................19
Limited warranty ..........................................20
Table of contents
Your new thermostat is pre-programmed
and ready to go!
See page 6 for quick start.
69-2337EF-01.book Page 1 Friday, May 25, 2012 2:24 PM
Operating Manual
69-2337EF—01 2
Your new Honeywell thermostat has been designed to give you many years of reliable service and
easy-to-use, push-button climate control.
Features
• Backlit display is easy to read
• Displays ambient (measured) temperature at all times
• One-touch access to setpoint temperature
• Preprogrammed schedule can greatly reduce your heating/cooling expenses
• 7-day programming
• Temporary and permanent override of schedule
• Early Start ensures right temperature at the right time
• Built-in compressor protection
About your new thermostat
69-2337EF-01.book Page 2 Friday, May 25, 2012 2:24 PM
RCT8100 Programmable Thermostat
3 69-2337EF—01
Early Start allows the thermostat to “learn” how long your furnace or air conditioner takes to reach the set
temperature. Simply program the desired times and desired temperatures into the schedule. The thermostat
will determine when to activate heating or cooling so that the desired temperature is attained at the desired
time.
Example: If you set Period 1 (see page 10) to 6 a.m. and the temperature to 70 °F (21 °C), the heat will come
on before the set time, so the temperature is 70 °F (21 °C) by the time you wake at 6 a.m.
Your thermostat has a feature that helps prevent damage to the compressor of your air conditioning. Because
damage can occur if the compressor is restarted too soon after shutdown, this feature forces the compressor
to wait 5 minutes before restarting. During the wait time, flashes on the screen. When the safe wait time
has elapsed, the icon stops flashing and the compressor turns on.
Early Start
Built-in compressor protection
69-2337EF-01.book Page 3 Friday, May 25, 2012 2:24 PM
Operating Manual
69-2337EF—01 4
Quick reference to controls
System switch
(see page 8) Fan Switch
(see page 9)
Screen
Lit for 12 seconds when
you press the backlight
button or any other button.
Programming buttons
(see pages 12 & 13)
Temperature buttons
Battery compartment (for 2 AA batteries)
Backlight button
69-2337EF-01.book Page 4 Friday, May 25, 2012 2:24 PM
RCT8100 Programmable Thermostat
5 69-2337EF—01
Quick reference to display screen
* flashes when the compressor protection is engaged (see page 3).
Temperature
The ambient (measured)
temperature is normally
displayed. To view the
setpoint temperature, press
or once. The setpoint
temperature will appear for
5 seconds.
Replace batteries
(see page 14)
Setpoint indicator
Appears when the setpoint
temperature is displayed.
Time
Current period number
Appears when the thermostat
is following the schedule (see
temporary override on page
14 and permanent override on
page 15)
Day
Heating is on
Cooling is on *
Replace filter
(see page 14)
69-2337EF-01.book Page 5 Friday, May 25, 2012 2:24 PM
Operating Manual
69-2337EF—01 6
Simply perform the three steps below and the thermostat is in operation:
Set the clock.................................................................................................................. See page 7
Select whether to heat or cool....................................................................................... See page 8
Select whether to keep the fan on continuously or only when needed.......................... See page 9
If you do not wish to use the pre-programmed schedule settings, you can:
Modify the schedule .................................................................................................... See page 12
Temporarily override the schedule .............................................................................. See page 14
Permanently override the schedule............................................................................. See page 15
This thermostat is ready to go
69-2337EF-01.book Page 6 Friday, May 25, 2012 2:24 PM
RCT8100 Programmable Thermostat
7 69-2337EF—01
Press Clk. The hour will flash.
Press or to set the hour.
Press Clk. The minutes will flash.
Press or to set the minutes.
Press Clk. The day will flash.
Press or to set the day.
Press Exit.
NOTE: The time display flashes when the clock has lost its settings
Set the clock
Press to start time and day setting
Press to set the time or the day
Time and day display
Press to end time and day setting
69-2337EF-01.book Page 7 Friday, May 25, 2012 2:24 PM
Operating Manual
69-2337EF—01 8
Select the system setting
Use the System switch to place the system in one of the following
modes:
•Heat: System is in Heating mode.
•Off: System is off.
•Cool: System is in Cooling mode.
CAUTION: EQUIPMENT DAMAGE HAZARD
Do not use Cooling mode when the outdoor temperature is below 50 °F (10 °C).
NOTE: When you place the thermostat in Cooling mode, you might need to wait up to
five minutes before cooling can start. This is a safety feature for the compressor. will
flash on the screen until cooling starts.
69-2337EF-01.book Page 8 Friday, May 25, 2012 2:24 PM
Altri manuali per RCT8100
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Honeywell Termostato
Honeywell
Honeywell RTH111 series Manuale utente
Honeywell
Honeywell T8000 Manuale
Honeywell
Honeywell 9000 Series Manuale utente
Honeywell
Honeywell t8034c Manuale utente
Honeywell
Honeywell T8600 Manuale utente
Honeywell
Honeywell RTHL221 series Manuale utente
Honeywell
Honeywell RTH2510 Series Manuale utente
Honeywell
Honeywell PRO 4000 Series Manuale utente
Honeywell
Honeywell T841A Manuale utente
Honeywell
Honeywell VisionPRO TB8220 Manuale utente
Honeywell
Honeywell MagicStat /28 Manuale utente
Honeywell
Honeywell Easy-To-See POWERPILE TS86A Istruzioni per il montaggio
Honeywell
Honeywell Lyric Manuale utente
Honeywell
Honeywell T6R-HW Manuale utente
Honeywell
Honeywell VisionPRO TH8000 Series Manuale utente
Honeywell
Honeywell PRO TH3110B Manuale utente
Honeywell
Honeywell T810D Manuale utente
Honeywell
Honeywell VisionPRO TH8000 Series Manuale utente
Honeywell
Honeywell RTH7400 series Manuale utente
Honeywell
Honeywell PRO 1000 Manuale utente
