Hoover Concept one Manuale utente

Fill in and retain!

IIIt'llll'll II II I II1'11111IIIIIl'lllIIIIIIll ' I II II I'LI'H B i

The HOOVER vacuum cleaner you have just purchased is a combina-

tion cleaner. It is used for carpet and rug cleaning and may be used

with attachments for above the floor cleaning.

The model and serial number appear toward the rear of the bottom of

the cleaner.

For your personal records, please enter these numbers in the spaces

provided below and retain in a safe place.

Your cleaner is model

and has serial number

Save!

Index

Assembling Cleaner ............................. 5

Cleaner Description ........................... 3,4

How to Use

Cleaning Tools ............................. 9-12

Special Features .............................. 7

Upright Cleaner ............................. 6-8

If You Have a Problem .......................... 21

Important Safeguards ........................... 2

Lubrication ................................... 22

Maintenance

Authorized Hoover Service .................... 21

Dirt Duct and Dirt Tube .................... 18,19

Replacing Belts ........................... 15-18

Replacing Brushes ........................ 20,21

Replacing Headlight ....................... 14,15

Replacing Throw Away Bag ................ 12-14

Important Safeguards!

• Read all instructions.

• Warning: Electric shock could occur if used outdoors or on wet

surfaces.

Close supervision is necessary when any appliance is used by or

near children. Do not allow vacuum cleaner to be used as a toy or to

run unattended at any time.

Keep hands, feet, loose clothing, and hair away from rotating agita-

tor. Do not operate cleaner in bare feet or when wearing open toe

shoes or sandals.

•Don't run cleaner over cord. It may damage insulation.

•Do not use cleaner to pick up matches, or live ashes and cigarette

butts.

Never vacuum in the presence of flammable or combustible liquids

or fumes.

• Avoid picking up hard, sharp objects with the cleaner. They may

damage the cleaner and the bag.

• Do not allow cleaner to run in a stationary position on non-carpeted

floors; damage could occur to these surfaces.

•Unplug cleaner when not in use. Turn machine off at switch before

unplugging.

•Always disconnect cord from electrical outlet before servicing the

cleaner.

Change bag frequently when picking up very fine materials such as

powder.

Grasp the plug to disconnect from wall outlet to avoid damage to

cord, plug, prongs, or receptacle.

If cleaner has a cord reel, hold on to the plug while cord is being re-

wound to prevent cord from whipping.

The use of an extension cord is not recommended,

If cleaner is in disrepair, do not attempt to operate,

Have repairs made by the qualified personnel at Hoover Factory

Service Centers or Authorized Hoover Warranty Service Dealers.

•Use vacuum cleaner only for its intended use as described in the

instructions. Use only attachments recommended by the appliance

manufacturer; others may cause hazards.

Save these instructions!

Unpacking

Handle

section

Unpack the cleaner from the car-

ton and remove and dispose of

cardboard packing.

Make a small loop with cord and

place it over the hook at the back

of the handle. When operating,

cord should be positioned as

shown.

Before operating your cleaner,

identify features and controls

shown in the diagram, then,

read the section on "How to usq

1. Edge Cleaning: Brushed edge cleaning is provided on the right side

of the cleaner. Standard edge cleaning is provided on the left side.

2. Handle Release Pedal: step on pedal to lower handle to either

operating or low position.

3. Cord Reel: to unwind cord, pull from cord reel to desired length.

4. Cord Return Button: depress to automatically rewind cord for

storage. Hold plug until cord is rewound.

5. Vinyl Bag Jacket: covering for throw away bag.

6. Bag Spring: place spring ring over hook to support the bag.

7. ON-OFF 'Power Surge' Switch

8. Handle Grip.

9. Air Freshener Dispenser: designed to hold a fragrance tablet and

release a pleasant scent during cleaning.

10.Twin Headlight

I1. Carpet Height Adjustment Lever: choose" LOW/M ED", "P LU S H",

or "SHAG".

12. Molded Furniture Guard

_lote: If using cleaner on new carpet, be sure to change bag frequently.

_ee "Maintenance" section for bag replacement.

)perate cleaner only at voltage specified on data plate on bottom of

_leaner.

How to assemble

Remove the tape holding the two

handle attachment screws from

the lower end of the handle. Set

screws aside.

Align handle with ON-OFF switch

to the rear of the cleaner and label

to the front. Fold cord beside cord

tube as shown. Push cord and

tube completely up into handle.

CORD

Insert handle into the cleaner to

the line indicated on label. Inser-

tion to the line is necessary for

proper screw alignment.

Lower handle to operating posi-

tion and place spring bag ring over

hook located on handle.

Remove paper bag from inside the

vinyl jacket. Then remove dirt tube

by pushing to either side to release

retention clips. Lift tube up and

out,

Insert the two screws into the

holes provided inside the front

housing.

Tighten with screwdriver. Snap

dirt duct back into place. Replac_

paper bag. (Follow instructions

on bag. )

Zip vinyl jacket.

Check air freshener

dispenser

The small drawer in the top of the

bag cap should not be removed.

If it should become detached,

replace by unhooking the bag

spring and tipping the bottom of

the drawer to insert projections

into back of cap opening. Push

drawer down into position and

hook bag spring.

How to use

To transport

To move your cleaner from room

to room, put the handle in the up-

right position, tilt the cleaner back

on the large rear wheels and push

forward.

Handle adjustment

The handle of your cleaner has

three positions: Upright for stor-

age and when using attachments.

Operating for general operation on

carpet and foors. Low for reaching

under low furniture. The handle

can be lowered by stepping on the

pedal at the rear of the cleaner.

ON-OFF "Power Surge"

switch

Operate your cleaner at normal

speed by pushing the switch down

one position. To turn cleaner off,

push switch up.

Normal Speed is to be used for

regular cleaning of carpet and rugs

and when using cleaning tools.

Your cleaner is also equipped with

a Power Surge switch. When the

switch is pushed down as far as

possible it is in the Power Surge

speed.

"Power Surge" Speed is to be

used for extra cleaning power on a

heavily soiled area of carpet. Slide

the switch down as far as possible

and hold it in that position to en-

gage the "POWER SURGE"

speed. When the switch is re-

leased, it will return to the NOR-

MAL speed position.

Note: When cleaning any floor

covering, turn cleaner "OFF"

when unattended, particularly on

non-carpeted floors. The agitator

cleans so thoroughly that opera-

tion while the cleaner is stationary

may mar the floor covering.

OFF

NORMAL-a

'POWER

SURGE"

Special features

Edge cleaning

Brushed edge cleaning is provided

on the right side of the cleaner to

remove imbedded dirt in carpet

near baseboards and furniture.

Guide the right side of the cleaner

parallel to the edge of carpet or

furniture for brushed edge clean-

ing.

Standard edge cleaning is provid-

ed on the left side of the cleaner.

Standard edge cleaning removes

surface dust and litter.

,.u

NOZZLE

Adjustment for carpet

pile height

The cleaning of carpet and rugs

takes place at the nozzle. This is

the opening at the bottom of the

cleaner where the agitator is lo-

cated.

It is necessary for the nozzle to be

adjusted properly to the various

carpet pile heights. The adjust-

ment lever on the front of the

cleaner may be set on three differ-

ent self-adjusting ranges.

On very dense pile plush or shag

carpet, some difficulty in pushing

the cleaner may occur. In this

case, position the adjustment le-

ver on PLUSH or SHAG. When

cleaning non-carpeted floors, set

adjustment lever to LOW/MEDI-

UM and use Normal Speed. Be-

cause of the vigorous action of

the agitator, do not allow

cleaner to run in a stationary

position on any floor covering, as

marring may occur.

Disconnect cleaner from electri-

cal outlet before making nozzle

adjustment.

To change the nozzle adjustment

grasp the handle and tilt the

cleaner forward. Move the lever

with your hand until it "clicks" in-

to the desired position.

Air freshener dispenser

Lift drawer in the bag cap of your

cleaner and insert the air freshener

tablet that has been packed with

your cleaner. Push drawer down

into position.

The amount of fragrance released

is regulated by sliding the control

to one of three settings shown on

top of the bag cap.

Air freshener tablets may be ob-

tained from your local authorized

Hoover dealer, a Hoover Factory

Service Center, or by using the

mail order form packed with your

cleaner.

Min Max

Cleaning Tools

This cleaner may be used with cleaning tool attachments. The Deluxe or

Standard cleaning tool set may be purchased at additional cost from

Hoover Dealers. The cleaning tools allow you to do above the floor clean.

ing and to clean hard to reach areas.

Deluxe cleaning tool set

U3901 includes vinyl hose, con-

verter, wands, dusting brush, fur-

niture nozzle, wall/floor brush

and crevice tool.

Standard cleaning tool set

U3903 includes lightweight hose,

converter, wand, multi-purpose

brush and crevice tool.

How to assemble hose

and converter

By using this converter attach-

ment, suction is channeled from

the cleaner to the hose and clean-

ing tools.

The converter must first be as-

sembled to the hose by inserting

the converter into the hose con-

nector.

,,, ul i in,ii i, i,,

HOLES

CONNECTOR CONVERTER

Altri manuali per Concept one

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Hoover Aspirapolvere

Hoover

Hoover SmartWash+ FH52000 Manuale utente

Hoover

Hoover SMART H4012 Manuale utente

Hoover

Hoover 5007PH Manuale utente

Hoover

Hoover LA71SM10 Manuale utente

Hoover

Hoover 38766019 Manuale utente

Hoover

Hoover Z Manuale utente

Hoover

Hoover Freedom Stick FD22RA Istruzioni operative

Hoover

Hoover SmartWash Pet Complete Manuale utente

Hoover

Hoover CH50015 Manuale utente

Hoover

Hoover S5640 Manuale utente

Hoover

Hoover Dual Power HW86-DP-M Manuale utente

Hoover

Hoover SteamVac SpinScrub FH50046 Manuale utente

Hoover

Hoover Concept one Manuale utente

Hoover

Hoover 9001PH Regal Manuale utente

Hoover

Hoover Guardsman C1810010 Manuale utente

Hoover

Hoover ONEPWR EMERGE BH53600V Manuale utente

Hoover

Hoover HE332ALG Manuale utente

Hoover

Hoover Freedom FD22L Manuale utente

Hoover

Hoover SM4000C4 Manuale utente

Hoover

Hoover freemotion Manuale utente

Hoover

Hoover TASKVAC H-8580 Manuale utente

Hoover

Hoover POWERDASH GO Manuale utente

Hoover

Hoover VR81HU03 Manuale utente

Hoover

Hoover Essential 3110 Manuale utente

Manuali Aspirapolvere popolari di altre marche

Bissell

Bissell LittleGreen Proheat 1425 Series Manuale utente

Panasonic

Panasonic MC-YL637S147-AE Manuale utente

NEFF

NEFF N17XH10 0 Series Manuale utente

LG A9 Series Manuale utente

Oreck

Oreck Cordless Captura BK51700 Series Manuale utente

Kogan

Kogan KAVACROBVWA Manuale utente

Kränzle

Kränzle VENTOS 50 ID Guida utente

EVVO

EVVO Ai35 Manuale utente

DeWalt

DeWalt DWH200D Manuale utente

Pontec

Pontec Pondomatic Vacuum Cleaner Manuale utente

Cleanmaxx

Cleanmaxx PC-P007E Manuale utente

Exido

Exido 240-114 Manuale utente

RIDGID

RIDGID WD1685AU0 Manuale utente

Ezviz

Ezviz RE4P Manuale utente

STG global

STG global TANVAC HDV3000 Manuale utente

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuale utente

Factory

Factory M3340 Manuale utente

Shop-Vac

Shop-Vac VN92 SERIES Manuale utente