Hoover LV Manuale utente

Fill in and retain!

The HOOVER vacuum cleaner you have just purchased is a com-

bination cleaner. It has a motorized power nozzle for carpet and

floor cleaning and has cleaning tools for above the floor clean-

ing.

Your cleaner is a model

and

has

a serial number

For your personal records, please enter the model number and

serial number in the spaces provided above and retain in a safe

place.

The model number and serial number appear on the bottom of

the

cleaner.

Save!

Index

Assembling Cleaner

..................................... 57

Cleaner Description

.....................................

3-5

Cleaning Tools

..........................................

9,lO

How To Use Power Nozzle

...............................

7-9

Important Safeguards

...................................

Lubrication

.............................................

Maintenance

Nozzle Hose

.........................................

Replacing Agitator Brushes

..........................

l7,18

Replacing Bag

......................................

12,13

Replacing Belt

......................................

14-17

Replacing Bottom Plate Brush

.......................

19,20

Replacing Headlight

.........................

.......

20,21

Secondary Filter

....................................

Storage

................................................

To Clean Stairs

.........................................

User Check List

.........................................

Important safeguards!

Read all instructions.

Warning: Electric shock could occur if used outdoors or on wet

surfaces.

Close supervision is necessary when any appliance is used by

or near children. Do not allow vacuum cleaner to be used as a toy

or to run unattended at any time.

Keep hands, feet, loose clothing, and hair away from rotating

agitator. Do not operate the cleaner in bare feet or when wearing

open toe shoes or sandals.

l Don’t run power nozzle over cord. It may damage insulation.

Do not use cleaner to pick up matches, or live ashes and

cigarette butts.

l Avoid picking up hard, sharp objects with the cleaner. They

may damage the cleaner and the bag.

l Unplug cleaner when not in use. Turn machine off at switch

before unplugging.

Always disconnect cord from electrical outlet before servicing

the cleaner.

Change bag frequently when picking up very fine materials

such as powder.

l Grasp the plug to disconnect from wall outlet to avoid damage

to cord, plug, prongs, or receptacle.

l The use of an extension cord is not recommended.

l If cleaner is in disrepair, do not attempt to operate.

l Have repairs made by the qualified personnel at Hoover Fac-

tory Service Centers or Authorized Hoover Warranty Service

Dealers.

l Use vacuum cleaner only for its intended use as described in

the instructions. The use of attachments not recommended by

the

anoliance

manufacturer may cause hazards.

Save these instructions!

Lubrication

The motor is equipped with one ball bearing and one sleeve bearing.

These bearings contain sufficient lubrication for the life of the motor.

The addition of lubricant could cause damage. Therefore, do not

add lubricant to either motor bearing.

The agitator is equipped with two ball bearings that should be

lubricated periodically. This should be done by a Hoover Factory

Service Center or an Authorized Hoover Warranty Service Dealer.

UNPACKING THE CLEANER

Upack the cleaner from the carton

and identify the parts shown.

Remove and dispose of the

cardboard packing.

A. Canister

B. Power nozzle

C. Disposable bag

D. Tools with tool storage

rack, extension wands

and hose

Power Nozzle with Headlight for

Model S3139 only

The cleaner assembled will

look like the drawing below.

IO.

12.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

FURNITURE GUARD

Around cleaner and power nozzle.

COMBINATION

CARPET AND FLOOR POWER

NOZZLE Power nozzle automatically adjusts to different carpet

pile heights. Has setting for “Carpet” and “Bare Floor”.

SURFACE SELECTOR INDICATOR Shows “Carpet” or

“Bare Floor” setting of Surface Selector Lever.

SURFACE SELECTOR LEVER Push lever with your toe to

adjust the power nozzle for “Carpet” and “Bare Floors”.

CARRYING HANDLE

CASTERS OR WHEELS Provide easier towing; pull cleaner

using hose to guide the cleaner easily over carpet, throw rugs and

door sills.

HOSE CORD CONNECTION TO CLEANER

Plug

hose cord

into cleaner base at receptacle.

CORD REWIND CONTROL To unwind cord, pull to desired

length. Step on cord rewind control to automatically rewind for

storage.

TOOL STORAGE RACK Tool storage for crevice tool,

furniture nozzle, wall/floor brush and dusting brush. (Removable)

FURNITURE NOZZLE II. WALL/FLOOR BRUSH

DUSTING BRUSH 13. CREVICE TOOL

ON-OFF CONTROL A convenient foot operated control on top

of cleaner.

SPRING LATCH Connects extension wands.

EXTENSION WANDS Connect to hose and power nozzle or

cleaning tools.

COVER LATCH

HANDLE ADJUSTMENT LATCH Step on the handle

adjustment latch to lower the handle.

CORD CLIPS Clip nozzle cord to extension wands.

SUCTION REGULATOR Close regulator for full suction. Open

regulator for easy cleaning of some types of carpets, lightweight

flexible rugs and lightweight draperies.

NOZZLE CORD CONNECTION TO HANDLE Plug nozzle

cord into receptacle underneath handle.

PLASTIC LATCH RING Connects hose grip to extension

wand or to cleaning tools.

HOSE GRIP

Operate cleaner only at voltage specified on data plate on bottom of

cleaner.

WARNING: Electrical shock could occur if used outdoors or on wet

surfaces.

How to assemble

1. Connect hose

To connect hose, insert hose into

opening of cleaner lining up the

arrow on the hose with the dot

on the cleaner. Turn the hose

clockwise until it lines up with the

bar on the cleaner and latch locks

into place.

When the hose is attached

properly, the hose cord plug will

reach to the receptacle on the

cleaner.

Insert the plug firmly and as deep

into the receptacle as possible.

To disconnect hose, depress latch

away from hose connection

opening in cleaner. While holding

latch, turn the hose counterclock-

wise until the arrow lines up with

dot on the cleaner.

2. Attach power nozzle

a. Attach power nozzle at the

end of the extension wand. Be

sure the nozzle is locked in place.

To release, press down on the

center of the plastic spring latch

and remove nozzle.

b. Position cord into cord clips

on extension wands, placing ex-

cess cord between nozzle and

bottom cord clip.

c. To attach the hose and

extension wands, rotate the

plastic latch ring on hose grip to

accept the button projection on

the extension wands.

Push the handle over the wand

so that the button projection fits

into the slot. Turn the outer ring

on the handle to lock the handle

and wand in place.

d. Connect nozzle power cord to

receptacle underneath handle.

3. Attach tool storage rack

To attach tool storage rack, insert

rear projections of rack into the

two rear slots on top of the

cleaner. Snap front middle

section into place.

How to use

Handle adjustments

The handle has two positions

when used with the power

nozzle: Storage and Low. Step

on the Handle Adjustment Latch

to lower the handle. Use the low

position for reaching under low

furniture. Raise the handle

straight up for the storage

position.

Carpet and rug cleaning

When using the power nozzle for

carpet and rug cleaning, push the

Surface Selector Lever with your

toe to the “Carpet” setting. The

Selector Indicator should show

the lever on the “Carpet”

position.

To remove, press front middle

section and lift rack up.

Position tools in appropriate

sections on rack as indicated by

symbols.

Automatic nozzle

adjustment

The power nozzle adjusts

automatically to the correct

cleaning height for all carpets

from low pile to shag. It is

suggested that you use the

power nozzle with the Suction

Regulator closed for full suction.

If the power nozzle is difficult to

push, open the Suction

Regulator.

Edge cleaning feature

This feature provides for cleaning

of carpet edges near baseboards

and solid furniture. Slots on the

nozzle bottom plate carry dust

from the carpet edge to the

nozzle.

Hard surface floor cleaning

The power nozzle can be used for cleaning hard surface floors such as

wood, linoleum, vinyl, asphalt and rubber tile, sealed cork, concrete

and terrazzo as well as carpet. You will find it particularly convenient

when cleaning rugs to adjust the power nozzle to “Bare Floor” and

continue cleaning the surrounding floor surfaces. The small front

wheels on the bottom of the power nozzle provide the proper nozzle

height for hard surface floors. The brush located directly behind the

nozzle opening helps to provide effective cleaning of hard surface

floors.

Adjust the Surface Selector with

your toe to the “Bare Floor”

setting. The Selector Indicator

should show the lever on the

“Bare Floor” position. As you

move from the rug surface and

begin to clean the floor, you will

hear an increase in sound as the

agitator brushes power sweep the

floor. If you prefer you may use

the Wall/Floor Brush to clean

hard surface floors. The power

nozzle

not

recommended

for

very irregular floor surfaces

such as brick, slate and

certain parquet floors. To clean

these floors use the

Wa!l/Floor

Brush.

Cleaning Tools

Removing and

Replacing tools

To remove tools from tool

storage rack, grasp the top of the

tool, as shown in the illustration,

and lift up.

To replace tools, position tool in

appropriate section on the tool

storage rack and snap into place.

Select the proper cleaning tool

The cleaning tools have many uses. Select the tool best suited for the

cleaning task from the descriptions below. Adjust the Suction Regula-

tor to select the amount of suction appropriate to the cleaning task.

1. Crevice tool

For radiators,

dresser drawers, spaces between

kitchen appliances.

2. Wall/floor brush

For

walls and very irregular hard

surface floors such as brick and

slate.

Furniture nozzle

For

upholstered furniture, draperies,

tapestries, mattresses, clothing,

automobile interiors and carpeted

stairs.

4. Dusting brush

For carved

furniture, table tops, books,

lamps, lighting fixtures, Venetian

blinds, baseboards, shutters and

registers.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Hoover Aspirapolvere

Hoover

Hoover CAPTURE Manuale utente

Hoover

Hoover S3621 Manuale utente

Hoover

Hoover Jive DRY Manuale utente

Hoover

Hoover FH50700 Manuale utente

Hoover

Hoover HydroPower Series Manuale utente

Hoover

Hoover AIRLIFT LIGHT Manuale utente

Hoover

Hoover U5175900 - Fold Away Widepath Upright Vacuum... Manuale utente

Hoover

Hoover SE71SP05 Manuale utente

Hoover

Hoover FLOORMATE DELUXE FH40160 Series Manuale utente

Hoover

Hoover U5184 Manuale utente

Hoover

Hoover Commercial Lightweight Cleaner with Dirt Cup Manuale utente

Hoover

Hoover PU71 Manuale utente

Hoover

Hoover HF122RH Manuale utente

Hoover

Hoover Convrtible U4097 Manuale utente

Hoover

Hoover Freedom Stick FD22RA Istruzioni operative

Hoover

Hoover SteamVac SpinScrub Manuale utente

Hoover

Hoover FloorMate, SpinScrub Floor Mate Spin Scrub Hard Floor... Manuale utente

Hoover

Hoover Convrtible U4087 Manuale utente

Hoover

Hoover Impulse H2510 Manuale utente

Hoover

Hoover 7011PH Allergy Istruzioni per l'installazione

Hoover

Hoover ONE PWR bh53350 Manuale utente

Hoover

Hoover SJ72WWB6 Manuale utente

Hoover

Hoover Rush Extra Manuale utente

Hoover

Hoover WindTunnel Self-Propelled Powered Hand Tool Manuale utente

Manuali Aspirapolvere popolari di altre marche

Bissell

Bissell LittleGreen Proheat 1425 Series Manuale utente

Panasonic

Panasonic MC-YL637S147-AE Manuale utente

NEFF

NEFF N17XH10 0 Series Manuale utente

LG A9 Series Manuale utente

Oreck

Oreck Cordless Captura BK51700 Series Manuale utente

Kogan

Kogan KAVACROBVWA Manuale utente

Kränzle

Kränzle VENTOS 50 ID Guida utente

EVVO

EVVO Ai35 Manuale utente

DeWalt

DeWalt DWH200D Manuale utente

Pontec

Pontec Pondomatic Vacuum Cleaner Manuale utente

Cleanmaxx

Cleanmaxx PC-P007E Manuale utente

Exido

Exido 240-114 Manuale utente

RIDGID

RIDGID WD1685AU0 Manuale utente

Ezviz

Ezviz RE4P Manuale utente

STG global

STG global TANVAC HDV3000 Manuale utente

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuale utente

Factory

Factory M3340 Manuale utente

Shop-Vac

Shop-Vac VN92 SERIES Manuale utente

Hoover lV Manuale utente

Manuali Aspirapolvere popolari di altre marche