Hopf FG8101G01 Guida

Because every fraction of a second counts ■

FG8101G01

Technical Documentation

FG8101G01

Technical Documentation

Page 2 of 49 Version: 01.02; Date: 18.11.2022

1Table of Contents

1Table of Contents...........................................................2

2 List of Figures.................................................................5

3 Change History...............................................................5

4 Preliminary Remarks......................................................6

4.1 Conformity data........................................................................... 7

4.2 Signal words for warnings........................................................... 8

5 Safety instructions..........................................................9

5.1 Intended Use............................................................................. 10

6 Device description........................................................11

6.1 Extension board positions......................................................... 12

6.2 PSU - Power Supply Unit.......................................................... 13

6.3 MC - Management Controller Board......................................... 13

6.4 TDC - Time Domain Controller Board....................................... 13

6.5 SP - Service Provider................................................................ 13

6.6 Minimal configuration of a FG8101G01..................................... 14

6.7 Front cover................................................................................ 14

6.7.1 LEDs..................................................................................................... 15

6.7.2 Button................................................................................................... 15

6.7.3 Display.................................................................................................. 15

7 System mounting FG8101G01.....................................18

FG8101G01

Technical Documentation

Page 3 of 49 Version: 01.02; Date: 18.11.2022

8 Connection of the supply and data lines.......................19

9 Extension boards..........................................................20

9.1 Mounting of extension boards................................................... 20

9.2 Dismounting of extension boards.............................................. 22

9.3 Supported extension boards..................................................... 23

9.3.1 FG8901P01 - PSU 85-264VAC / 125-250VDC.................................... 23

9.3.1.1 Connection..............................................................................................23

9.3.1.2 Status LEDs of extension boards ............................................................24

9.3.2 FG8901P02 - PSU 18-36VDC ............................................................. 25

9.3.2.1 Connection..............................................................................................25

9.3.2.2 Status LEDs of extension boards ............................................................26

9.3.3 FG8901P03 - PSU 36-76VDC ............................................................. 27

9.3.3.1 Connection..............................................................................................27

9.3.3.2 Status LEDs of extension boards ............................................................28

9.3.4 FG8901P04 - PSU 60-160VDC ........................................................... 29

9.3.4.1 Connection..............................................................................................29

9.3.4.2 Status LEDs of extension boards ............................................................30

9.3.5 FG8702G01 - MC, TDC und SP functionality ...................................... 31

9.3.5.1 Status LEDs of extension boards ............................................................32

9.3.6 FG8702G02 - MC, TDC und SP functionality ...................................... 33

9.3.6.1 Status LEDs of extension boards ............................................................34

9.3.7 FG8702G03 - MC, TDC und SP functionality ...................................... 35

9.3.7.1 Status LEDs of extension boards ............................................................36

9.3.8 FG8801N02 - SP functionality.............................................................. 37

9.3.8.1 Status LEDs of extension boards ............................................................37

FG8101G01

Technical Documentation

Page 4 of 49 Version: 01.02; Date: 18.11.2022

10 Commissioning...........................................................38

11 Maintenance...............................................................39

12 Troubleshooting..........................................................39

12.1 Procedure ............................................................................... 39

13 Repair.........................................................................40

13.1 Fan replacement..................................................................... 41

14 Technical Specifications.............................................44

FG8101G01

Technical Documentation

Page 5 of 49 Version: 01.02; Date: 18.11.2022

2List of Figures

Figure 1........................................................................................................................................................ 12

Figure 2........................................................................................................................................................ 14

Figure 3........................................................................................................................................................ 18

Figure 4........................................................................................................................................................ 20

Figure 5........................................................................................................................................................ 20

Figure 6........................................................................................................................................................ 21

Figure 7........................................................................................................................................................ 23

Figure 8........................................................................................................................................................ 25

Figure 9........................................................................................................................................................ 27

Figure 10...................................................................................................................................................... 29

Figure 11...................................................................................................................................................... 31

Figure 12...................................................................................................................................................... 33

Figure 13...................................................................................................................................................... 35

Figure 14...................................................................................................................................................... 37

Figure 15...................................................................................................................................................... 41

Figure 16...................................................................................................................................................... 42

Figure 17...................................................................................................................................................... 43

3Change History

Version

Date

Editor

Change Description

01.00

23.09.2021

POM

Creating Document

01.01

28.01.2022

POD

Revision of the safety instructions

01.03

14.11.2022

POM

Formatting revised; Added new extension boards

FG8101G01

Technical Documentation

Page 6 of 49 Version: 01.02; Date: 18.11.2022

4Preliminary Remarks

This document describes the functions, operation, mounting and commissioning of the

FG8101G01 product, as well as the hot-plug extension boards that can be used.

WARNING

Read the instructions completely. This will help you to

avoid hazards and errors.

The product information contains important information

on the intended use, installation and start-up.

Keep the product information in a suitable place where

it can be accessed for maintenance and repair.

FG8101G01

Technical Documentation

Page 7 of 49 Version: 01.02; Date: 18.11.2022

4.1 Conformity data

CE conformity

This device complies with the requirements of the EU Directives

2014/30/EU "Electromagnetic Compatibility" and 2014/35/EU "Low

Voltage Directive".

For this purpose, the device bears the CE marking

(CE = Communautés Européennes = European Communities).

The CE indicates to the control authorities that the product complies

with the requirements of the EU Directive - in particular with regard to

health protection and safety of users and consumers - and may be

freely placed on the Community market.

UKCA- conformity

This device complies with the requirements of the Directives

S.I. 2012/3032 "The Restriction of the Use of Certain Hazardous

Substances in Electrical and Electronic Equipment Regulations 2012“,

S.I. 2016/1091 "The Electromagnetic Compatibility Regulations 2016"

and S.I. 2016/1101 "The Electrical Equipment (Safety) Regulations

2016". For this purpose, the device bears the CE marking

The UKCA indicates to the control authorities that the product

complies with the requirements of the Directive - in particular with

regard to health protection and safety of users and consumers - and

may be freely placed on the UK market.

FG8101G01

Technical Documentation

Page 8 of 49 Version: 01.02; Date: 18.11.2022

4.2 Signal words for warnings

This document is not a complete list of all safety measures required for operation of the

product. However, it does contain information that you must observe for your personal

safety and to prevent damage to property. The instructions are presented as follows,

depending on the degree of danger:

ISO 7000-0434A

Allgemeines Warnzeichen

Vorsicht / Caution

DANGER

The signal word denotes a hazard with a high degree of risk

which, if not avoided, will result in death or serious injury.

WARNING

The signal word indicates a hazard with a medium level of risk

which, if not avoided, may result in death or serious injury.

CAUTION

The signal word indicates a hazard with a low level of risk that, if

not avoided, could result in a minor or moderate injury.

IEC 60417-6042

Vorsicht, Risiko eines

elektrischen Schlages /

Caution, risk of electric shock

DANGER

The signal word indicates a hazard with electrical voltage with a

high degree of risk.

Danger of Electric Shock!

IEC 60417-5041

Vorsicht, heiße Oberfläche /

Caution, hot surface

CAUTION

The signal word indicates a hazard with high device temperatures

Risk of burns

During operation, high device temperatures may occur depending

on the operating parameters and type.

Allow the unit to cool down before starting maintenance work.

IEC 60417-6222

Allgemeine Information, Hilfe

/ Information, general; help,

Note

A note in the sense of these instructions is important information

about the product or the respective part of the instructions to

which special attention is to be drawn.

FG8101G01

Technical Documentation

Page 9 of 49 Version: 01.02; Date: 18.11.2022

5Safety instructions

Note

The product information is intended exclusively for qualified electricians.

This document is not a complete list of all safety measures required for

operation of the product. However, it does contain information that you must

observe for your personal safety and to avoid damage to property. The notes

are presented as follows, depending on the degree of danger:

Note

Assembly, installation, commissioning and repairs of electrical devices may

only be carried out by a qualified electrician.

It is essential to observe the safety regulations and generally applicable

technical rules relevant to the installation location.

Observe the applicable standards and regulations for system installation.

Prevent malfunctions and thus avoid personal injury and damage to property.

CAUTION

Damage to the device due to overvoltage

Ensure that the power supply is correct.

Take suitable lightning protection measures to ensure that the permitted

voltage is not exceeded at the connections.

DANGER

Danger of Electric Shock

The device is operated with dangerous voltages.

It is imperative that you observe the installation instructions for the respective

extension boards.

FG8101G01

Technical Documentation

Page 10 of 49 Version: 01.02; Date: 18.11.2022

5.1 Intended Use

The equipment may only be operated under the ambient conditions described in this

document.

Correct and safe operation of the product requires the following:

A proper transport

Proper storage, installation and assembly

Proper operation and maintenance

When operating electrical equipment, certain parts are inevitably under dangerous

voltage, or may have elevated temperatures.

If not handled properly, death, serious injury or property damage may result.

The equipment must be grounded at the ground terminal before any connections

are made.

Dangerous voltages may be present in all circuit parts connected to the power

supply.

Note

The manufacturer accepts no liability for applications that deviate from or go

beyond the intended use.

Indice

Altri manuali hopf Hardware di rete

hopf

hopf 4465AC Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente

hopf FG8101G01 Guida

Manuali Hardware di rete popolari di altre marche