HORNER OEE Solution Manuale utente

MAN1348-01-EN_OEE_UM

August 10, 2022

MAN1348-01-EN_OEE_UM

August 10, 2022 2 | P a g e

PREFACE

This manual explains how to use the Horner OEE Solution.

reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language, in any form by any means, electronic,

mechanical, magnetic, optical, chemical, manual or otherwise, without the prior agreement and written

permission of Horner APG, Inc.

All software described in this document or media is also copyrighted material subject to the terms and

conditions of the Horner Software License Agreement.

Information in this document is subject to change without notice and does not represent a commitment

on the part of Horner APG.

Ethernet™ is a trademark of Xerox Corporation.

microSD™ is a registered trademark of SanDisk Corporation.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

For more information about the warranty and limitation of liability, please contact the Horner Solutions

Group Manager at 877-665-5666 or visit our website at www.hornersolution.com

 MAN1348-01-EN_OEE_UM 
August 10, 2022 3 | P a g e 
Table of Contents 
PREFACE............................................................................................................................................2 
LIMITED WARRANTY AND LIMITATION OF LIABILITY ...........................................................................2 
Table of Contents ......................................................................................................................................3 
SAFETY AND COMPLIANCE.............................................................................................................5 
1 Safety Warnings and Guidelines.................................................................................................5 
INTRODUCTION..............................................................................................................................7 
1 OEE Overview..............................................................................................................................7 
2 Production Data Availability .......................................................................................................8 
3 Types of Reports .........................................................................................................................8 
4 Contractual Requirements..........................................................................................................8 
ELECTRICAL INSTALLATION ............................................................................................................9 
1 OEE Power Wiring.......................................................................................................................9 
2 OEE Electrical I/O......................................................................................................................10 
ELECTRICAL - GROUNDING...........................................................................................................11 
1 Grounding Definition ................................................................................................................11 
2 Ground Specifications...............................................................................................................11 
3 How to Test for Good Ground ..................................................................................................11 
OEE SYSTEM NAVIGATION...........................................................................................................12 
1 Home.........................................................................................................................................12 
2 Trends .......................................................................................................................................14 
3 Summary...................................................................................................................................17 
4 Events........................................................................................................................................17 
5 Downtime Accumulators ..........................................................................................................18 
6 Call Accumulators .....................................................................................................................18 
CALLS............................................................................................................................................19 
1 Placing a Call .............................................................................................................................19 
2 Acknowledging a Call................................................................................................................20 
3 Clearing a Call............................................................................................................................20 
CONFIGURATION..........................................................................................................................22 
1 Configuration Overview............................................................................................................22 
2 Cell Configuration .....................................................................................................................23 
3 Shift Configuration....................................................................................................................26 
4 Part Editor/Viewer....................................................................................................................28 
5 Downtime Code Configuration .................................................................................................32 
6 Ethernet Configuration.............................................................................................................33 
7 Email Configuration ..................................................................................................................36 
8 System Information ..................................................................................................................38 
OEE SCORE CALCULATION OVERVIEW.........................................................................................39 
1 Availability.................................................................................................................................39 
2 Performance .............................................................................................................................39 
3 Quality.......................................................................................................................................39 
4 Overall Equipment Effectiveness..............................................................................................39 
5 Scheduled Breaks and Changeover; Effect on Scoring .............................................................39 
LOGIN / LOGOUT..........................................................................................................................41 
1 Log In.........................................................................................................................................41 

 MAN1348-01-EN_OEE_UM 
August 10, 2022 4 | P a g e 
2 Log Out......................................................................................................................................43 
WORK INTERFACES ......................................................................................................................44 
1 Work: Detailed ......................................................................................................................44 
2 Work: Simplified....................................................................................................................47 
3 Work: Basic............................................................................................................................49 
DOWNTIME..................................................................................................................................50 
1 Manual Downtime.................................................................................................................50 
2 Automatic Downtime............................................................................................................50 
3 Downtime Code Prompt........................................................................................................50 
4 Automatic Downtime Code Entry .........................................................................................51 
PART CHANGEOVER.....................................................................................................................52 
1 Changeover Mode.................................................................................................................53 
DATA LOGGING AND STORAGE....................................................................................................54 
1 Data Logging..........................................................................................................................54 
2 Data Log Transfer ..................................................................................................................56 
3 Configuration Storage ...........................................................................................................56 
CONFIGURATION UTILITY.............................................................................................................58 
1 Part Configuration.................................................................................................................59 
2 Shift Configuration ................................................................................................................62 
3 Downtime Code Configuration .............................................................................................65 
4 Login Configuration...............................................................................................................66 
5 Email / SMS Configuration ....................................................................................................68 
6 File Locations.........................................................................................................................68 
DATA CONCENTRATOR ................................................................................................................69 
1 Configuration.........................................................................................................................70 
2 Web Browser Access.............................................................................................................71 
MODBUS TCP ACCESS ..................................................................................................................73 
1 Configuration Information ....................................................................................................73 
2 OEE Data................................................................................................................................74 
3 Light Tower and Call Status...................................................................................................75 
CONTACT INFORMATION.............................................................................................................75 
INDEX..............................................................................................................................................76 
 

MAN1348-01-EN_OEE_UM

August 10, 2022 5 | P a g e

1SAFETY AND COMPLIANCE

1.1 Safety Warnings and Guidelines

When found on the product, the following symbols specify:

Warning: Consult user documentation.

Warning: Electrical Shock Hazard.

WARNING –EXPLOSION HAZARD –Do not disconnect equipment unless power has been switched off or

the area is known to be non-hazardous

WARNING: To avoid the risk of electric shock or burns, always connect the safety (or earth) ground

before making any other connections.

WARNING: To reduce the risk of fire, electrical shock, or physical injury it is strongly recommended to

fuse the voltage measurement inputs. Be sure to locate fuses as close to the source as possible.

WARNING: Replace fuse with the same type and rating to provide protection against risk of fire and

shock hazards.

WARNING: In the event of repeated failure, do not replace the fuse again as a repeated failure indicates

a defective condition that will not clear by replacing the fuse.

WARNING—EXPLOSION HAZARD—Substitution of components may impair suitability for Class I,

Division 2

WARNING: The USB parts are for operational maintenance only. Do not leave permanently connected

unless area is known to be non-hazardous

WARNING—EXPLOSION HAZARD—BATTERIES MUST ONLY BE CHANGED IN AN AREA KNOWN TO BE

NON-HAZARDOUS.

WARNING: Battery May Explode If Mistreated. Do Not Recharge, Disassemble or Dispose Of In Fire.

WARNING: Only qualified electrical personnel familiar with the construction and operation of this

equipment and the hazards involved should install, adjust, operate, or service this equipment. Read

and understand this manual and other applicable manuals in their entirety before proceeding. Failure

to observe this precaution could result in severe bodily injury or loss of life.

MAN1348-01-EN_OEE_UM

August 10, 2022 6 | P a g e

All applicable codes and standards need to be followed in the installation of this product.

For I/O wiring (discrete), use the following wire type or equivalent: Belden 9918, 18 AWG or larger.

Adhere to the following safety precautions whenever any type of connection is made to the module.

a) Connect the green safety (earth) ground first before making any other connections.

b) When connecting to electric circuits or pulse-initiating equipment, open their related breakers.

Do not make connections to live power lines.

c) Make connections to the module first; then connect to the circuit to be monitored.

d) Route power wires in a safe manner in accordance with good practice and local codes.

e) Wear proper personal protective equipment including safety glasses and insulated gloves when

making connections to power circuits.

f) Ensure hands, shoes, and floors are dry before making any connection to a power line.

g) Make sure the unit is turned OFF before making connection to terminals. Make sure all circuits

are de-energized before making connections.

h) Before each use, inspect all cables for breaks or cracks in the insulation. Replace immediately if

defective.

MAN1348-01-EN_OEE_UM

August 10, 2022 7 | P a g e

2INTRODUCTION

2.1 OEE Overview

The Horner OEE Solution is a pre-programmed system that is easy and quick to implement with no

further programming development required by the user end. After a simple initialization setup via the

touchscreen interface (CONFIG /SETUP area), the OEE kit will start collecting and monitoring production

data immediately, though more complex configuration is available as well. This Setup should take

around 30 minutes or less.

The OEE kit provides tools for management, including real-time plant and individual work cell level

visibility of all the work cells that have the Horner OEE machine monitoring solution kit installed and

running on the production floor. The system logs uptime, downtime, good parts, bad parts, and it also

gives the operator the ability to flag the work cell as down and designate why the work cell is down. The

system calculates OEE scores in real time as the part run or shift progresses.

Operators also have a Call for Help function (part of lean manufacturing) to call for raw materials,

maintenance, and supervisors. This gives operators further empowerment with ability to define what

might be causing work processes to miss production quotas.

There is no need to write program logic to use the OEE kit. The system comes pre-programmed and

ready to use as soon as configuration parameters are in place specific to the manufacturing facility in

which the system is installed. The program logic that is in place is not normally accessible.

Management can access OEE data and Call for Help data for understanding production timeline,

analysis, and methods to improve the production process.

Designed to be flexible for diverse types of processes, system configuration allows for:

•Manual cycle and scrap triggers via the touchscreen

•Automatic cycle and scrap triggers via input signals from the manufacturing equipment

•Batch mode operation for single part runs where calculations start over for each part change

•Shift mode operation for calculations that encompass multiple part changes in a single shift

•Part configuration that allows for Changeover times to either affect or not affect OEE scoring

•Shift configuration that allows for multiple break times to either affect or not affect OEE scoring

•Remote access to configuration over an Ethernet network

•Email notification of Calls and for shift-end data log files

•A separate configuration utility that makes constant or cumbersome changes to the system

easier to implement

MAN1348-01-EN_OEE_UM

August 10, 2022 8 | P a g e

2.2 Production Data Availability

Production data is available from the touchscreen interface itself, on displays created separate from

those normally used by the production personnel operating the machine. Management can view shift,

day, week and even monthly production data and information.

A separate Data Concentrator allows monitoring of up to 32 OEE stations brought to a single point. The

centralized data can be accessed with any Internet Browser for both large-screen production monitor

viewing and mobile device viewing.

OEE offers three main points of data to gather data to lead to more productive and valuable operating

time:

•Availability Loss –Due to unplanned stops, equipment failure, planned stops, and setup

adjustments.

•Performance Loss –Due to small stops, idling or minor stops, slow cycles, and reduced speed.

•Quality Loss –Due to production rejects, process defects, startup rejects, and reduced yield.

2.3 Types of Reports

Reports offered by OEE:

•Production Log Data is available to all users on the network

•Downtime durations and reason codes

•Call for help, Acknowledge Call and Clear Call for help data log files.

•Log files created in CSV format for the ability to create custom dashboards and reports

2.4 Contractual Requirements

There are contractual requirements and a signed NDA required for anyone that wants access to the

Intellectual Property of the Horner Solutions Group contained in the OEE solution kit for any

customization of the logic already in place.

The OEE Machine Monitoring Solution Program allows configuration changes and adjustments to

parameters that need to be tailored for each customer’s individual work cell requirements. Also, this

program in locked down and password protected from viewing, copying, changing, uploading or

downloading logic, data log setup, or operator interface displays. If a customer, channel partner, or

system integrator would like to modify the program logic, operator interface screens, or data log

information, they must contact the factory to discuss with Horner Solutions Group Manager.

Each of these cases will be handled on a case-by-case basis determined by volume of the opportunity,

who requested the modification. Finally, a signed NDA protecting the IP of this product for the Horner

Solutions Group is needed, including who will support the application changes that are made and what

the costs are that are associated with the individual project requirements.

To contact the factory, please contact the Horner Solutions Group Manager at 877-665-5666.

MAN1348-01-EN_OEE_UM

August 10, 2022 9 | P a g e

3ELECTRICAL INSTALLATION

3.1 OEE Power Wiring

MAN1348-01-EN_OEE_UM

August 10, 2022 10 | P a g e

3.2 OEE Electrical I/O

Indice

Altri manuali HORNER Attrezzature industriali

HORNER

HORNER XLE 3 Manuale utente

HORNER

HORNER XLE Manuale utente

Manuali Attrezzature industriali popolari di altre marche

ABB

ABB Unifix AD Manuale

Mark 7

Mark 7 Evolution Manuale utente

Husky

Husky HyPET Manuale utente

bora

bora PM-1800 Manuale utente

Grizzly

Grizzly T32428 Manuale utente

Siemens

Siemens 8MF1 Series Manuale utente

ABB

ABB HT610965 Manuale utente

ABB

ABB SafeLink Manuale utente

Phoenix

Phoenix PHX-150 Manuale utente

ABB

ABB A165-L32 Manuale utente

ABB

ABB HT842936 Manuale utente

Rioned

Rioned UrbanJet Manuale utente

Hermetica

Hermetica 10 Series Manuale utente

Hammerhead

Hammerhead HG375 Manuale utente

SCHUNK

SCHUNK VERO-S NSE-A3 138 Istruzioni utente

ABB

ABB HT566657 Manuale utente

Webasto

Webasto GSE CAN Manuale utente

ABB

ABB HT614003 Manuale utente