Hotone Binary Amp Manuale utente

Binary Amp Owner's Manual

DESIGN INSPIRAT I O N

Congratulations on your new Hotone Binary pedal! You have just added some serious power to your pedalboard.

The Binary series lets loose versatile pro effects in compact cases. A dual-DSP powered platform and CDCM modeling

system ensure a realistic playing experience, dual-footswitch design and variable I/Os make it easy to use, and an OLED

screen offers clear, detailed display.

Binary Amp is an amp simulator delivering precise classic amp sounds along with high quality cab simulators, and a built-in

FX loop lets you expand your own sound.

Welcome

DESIGN INSPIRAT I O N

✪ Grown out of next-gen XTOMP technology

✪ Compact, easy-to-use dual footswitch amp simulator pedal

✪ Advanced CDCM modeling system ensures realistic playing experience

✪ Dual DSP-powered platform ensures high sound quality

✪ 24-bit A/D/A conversion, up to 110dB S/N ratio

✪ 16 CDCM powered legendary amp models along with dedicated cab models

✪ USB jack for firmware upgrading, loading/managing effects with free PC/Mac software

✪ FX Loop jacks for expanded effects

✪ 10 Presets (2 banks x 5 presets)

✪ Built-in OLED screen with clear display

✪ 5 transparent knobs with LEDs

✪ 9V DC power supply

Features

DESIGN INSPIRAT I O N

1-2.▽/△:For selecting presets, bypass, and other parameters.

3. +/- buttons: For selecting effects and adjusting parameters.

4. CAB SIM button: For switching cab sim on/off.

5. SAVE button: For saving parameter changes.

6. OLED screen: Shows bank/patch numbers, setting values and other operation info.

7. VOL: Controls effect output level.

8-10. BASS/MIDDLE/TREBLE: 3-Band EQ, controls the effect tone.

11. GAIN: Controls effect gain amount.

12. INPUT: 1/4” (6.35mm) mono jack, for plugging in instruments or other effects.

13-14. SEND/RETURN jacks: 1/4” (6.35mm) mono jacks, for connecting other effects.

15. OUTPUT: 1/4” (6.35mm) mono jack, for connecting to amps or other effects.

16. USB jack: Mini USB jack, for effects editing, firmware updates, and factory reset.

17. DC 9V: Plug in your power supply here (DC 9V, center negative).

Panel Introduction

DESIGN INSPIRAT I O N

Note:

1. If Binary Amp sounds harsh or weird when connecting to the input jack on your amp, try to connect to the amp’s FX Loop return jack.

2. TURN ON FIRST, TURN OFF LAST. Always mute the mixer/audio interface or turn down the volume knob on your amp before plugging or unplugging

power jacks, cables, etc. When you're using a mixer or an audio interface, please adjust the knobs onboard carefully to avoid signal clipping.

Connections

DESIGN INSPIRAT I O N

Display

Plugging in your power supply will turn on the device. The main display will come up as below:

1 - Current bank/patch number

2 - Shows only when the cab sim is on

3 - Indicates the amp model you’re using in current patch

DESIGN INSPIRAT I O N

Select a Patch/Bank

Tap either ▽/△ footswitch once to change patches. Tap △ footswitch repeatedly to cycle through patches in the order A1, A2,

A3, …, B5, then A1. Tap ▽ footswitch to change patches in the opposite order.

DESIGN INSPIRAT I O N

Bypass

Tap both ▽/△ footswitches at the same time. In Bypass status, all the LED knobs will go out.

Note: This unit will be set to bypass status when you plug in the power jack.

DESIGN INSPIRAT I O N

Edit

1. Adjust the parameters

Use the onboard knobs to adjust the effect parameters. The screen display will be shown as below when adjusting:

1 - Current parameter value you’re adjusting (shown: volume)

2 - Saved parameter value in the current patch (PREV. = Previous value)

DESIGN INSPIRAT I O N

Edit

2. Select a different effect

Use the +/- button to change to another amp:

The inverted bank/patch number indicates that the current patch has been edited.

Indice

Altri manuali Hotone Pedale musicale

Hotone

Hotone Soul Press II Manuale utente

Hotone

Hotone Ampero Manuale utente

Hotone

Hotone Binary Eko Manuale utente

Hotone

Hotone OMP-6 Manuale utente

Hotone

Hotone Omni IR Manuale utente

Hotone

Hotone Ampero Manuale utente

Hotone

Hotone JOGG Istruzioni per il montaggio

Hotone

Hotone BINARY Manuale utente

Hotone

Hotone Skyline Wally Manuale utente

Hotone

Hotone Binary IR Manuale utente

Hotone

Hotone A STATION Manuale utente

Hotone

Hotone PRESS Series Guida rapida

Hotone

Hotone Ampero Manuale utente

Hotone

Hotone TAPE EKO Manuale utente

Hotone

Hotone AMPERO II STAGE Manuale utente

Hotone

Hotone Binary Mod Manuale utente

Manuali Pedale musicale popolari di altre marche

Behringer

Behringer ULTRA WAH UW300 Manuale utente

Whirlwind

Whirlwind oc-bass Manuale utente

Strymon

Strymon Lex-rotary Manuale utente

Behringer

Behringer PB600 Manuale utente

Lexicon

Lexicon MX200 Manuale utente

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manuale utente

Matthews Effects

Matthews Effects Whaler V2 Manuale utente

Grid 1

Grid 1 Pedal Jeanie Manuale utente

Amptweaker

Amptweaker tightboost Manuale utente

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manuale utente

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manuale utente

BYOC

BYOC Analog Chorus Manuale

Dimavery

Dimavery EPVP-50 Manuale utente

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manuale utente

Pro-MIDI

Pro-MIDI G25 Manuale utente

DW 7000 Manuale utente

FAMC

FAMC Liquid-Foot Jr. Series Manuale utente

Dimavery

Dimavery EPOD-50 Overdrive Manuale utente