Hotpoint HCM60 Manuale utente
AMC-3
Instructions for Installation and Use
Built-in Coffee Maker
Model HCM60
AMC-3
!
AMC-3
DESCRIPTION OF THE MACHINE ........................................................................................................ P. 4
• Front view .......................................................................................................................................... P. 4
• Side view and controls ........................................................................................................................ P. 5
• Safety instructions and warnings ......................................................................................................... P. 5
• Correct use ......................................................................................................................................... P. 5
• Technical safety .................................................................................................................................. P. 5
• Use .................................................................................................................................................... P. 6
DESCRIPTION AND OPERATION
................................................................................................................. P. 7
INSTALLATION OF THE MACHINE ....................................................................................................... P. 8
ADDING WATER AND COFFEE .............................................................................................................. P. 11
• Filling the water tank ........................................................................................................................... P. 11
• Filling the coffee bean container .......................................................................................................... P. 11
OPERATION AND USE ............................................................................................................................ P. 12
• Switching on ........................................................................................................................................ P. 12
• Setting the grinding ............................................................................................................................. P. 12
• Setting the quantity of ground coffee ................................................................................................... P. 13
• Setting the quantity of coffee .............................................................................................................. P. 13
• Programming the quantity of coffee ..................................................................................................... P. 13
• Setting 1 or 2 cups ............................................................................................................................... P. 13
PREPARATION OF THE DRINKS ........................................................................................................... P. 14
• Preheating the cups and pipes ............................................................................................................ P. 14
• Preparing the coffee ............................................................................................................................ P. 14
• Hot water ........................................................................................................................................... P. 14
• Steam ................................................................................................................................................. P. 14
CARE AND CLEANING ............................................................................................................................ P. 15
• Front and interior of the machine ........................................................................................................ P. 15
• Water tank .......................................................................................................................................... P. 15
• Filter holder – filter base – hot water or steam distributor ..................................................................... P. 15
DESCALING THE MACHINE .................................................................................................................. P. 16
OPERATING PROBLEMS ......................................................................................................................... P. 16
TECHNICAL DATA ................................................................................................................................... P. 17
CONTENTS
"
AMC-3
DESCRIPTION OF THE MACHINE
Front view
01. Lighting
02. Steam control
03. Filter base
04. Filter holder
05. Hot water/steam distributor
06. Drawer handle
07. Coffee distributor
08. Holder for filter during grinding
09. Ground coffee nozzle
10. Water tank
11. Drip tray
12. Coffee bean holder
13. Coffee distributor button
14. Grinding button
15. Steam distributor button
16. Hot water distributor button
17. Low water warning light
18. Low coffee warning light
19. On/Off switch
20. 1 cup selector
21. 2 cup selector
22. Short, normal or long coffee selector
23. Fuse holder (grinder)
24. Grinding setting control
25. Attention
26. Read the manual instruction
23
26
24
Attenzione
Leggere le istruzioni
Attenzione
Leggere le istruzioni
25
#
AMC-3
Side view and controls
DESCRIPTION OF THE MACHINE
Safety instructions and warnings
This machine complies with the current safety regulations. Incorrect use of the machine may cause harm.
Read the instructions carefully before using the machine. They contain important information on safety, use and maintenance,
to provide protection and to avoid damaging the machine.
Correct use
• This machine is designed solely for preparing espresso, cappuccino and long coffee and for boiling water for tea and other
hot drinks.
Other types of use are not permitted and may prove dangerous. The manufacturer will not be held liable for any damage
caused by incorrect use of the machine.
Technical safety
• Before connecting the machine to the electricity supply, check the connection data (voltage and frequency) on the data
sheet with that of the electricity supply thoroughly.
This data should be exactly the same to avoid damaging the machine. In case of doubt, contact a qualified electrician.
• The electrical safety of the machine is only guaranteed if it is connected to a regulation earth wire. It is very important to
check this carefully. In case of doubt, have the electricity supply checked by a qualified electrician. The manufacturer will
not be held liable for any harm or damage caused due to a lack or malfunctioning of the earth wire (e.g. risk of electric
shock).
• Only operate the machine when built-in so as to avoid contact with the electric parts. For the assembly, dismantling and
daily maintenance of the machine, always make sure it is disconnected from the electricity supply.
• The machine should not be connected to the electricity supply with extension cables, as these do not provide the necessary
safety for the machine (e.g. danger of overheating).
• The machine may also be built into a cabinet (special accessory). It is not suitable for outdoor use. Due to the weight of
the machine, the cabinet must be secured firmly to the wall.
$
AMC-3
• Installation, maintenance and repair works must only be carried out by qualified persons. Any installation, maintenance
and repair works carried out incorrectly may cause considerable danger to the user, for which the manufacturer will not
assume any liability.
• The machine should only be disconnected from the electricity supply when:
-The main switch of the electricity supply is disconnected;
-The fuse for the house electricity supply is removed;
-The plug to the machine is taken out of the electricity socket.
To disconnect the machine from the electricity supply, unplug without pulling on the cable.
• Under no circumstances should the machine casing be opened. Touching the voltage cables or changing the electrical
and mechanical structure may cause danger of electric shock. It may also affect the operation of the machine.
The manufacturer declines all responsibility for persons or property if the above instructions are not observed in full.
• If the machine has to be built in with other appliances, it must be separated from them with a shelf.
Use
Warning! Danger of scalding! Liquids leaving the distributors are boiling!
•Children should only use the machine under supervision. Children’s skin is more sensitive to high temperatures.
They may scald themselves! Remember too that espresso coffee is not a children’s drink.
•When using the machine for the first time, rinse the pipes to get rid of any deposits and for good hygiene.
•Only fill the water tank with drinking water at room temperature or chilled. Hot or boiling water or any other liquid may
damage the operation of the machine. It is advisable to replace the water daily to prevent bacterial growth.
•Only pour coffee beans into the coffee holder. If ground coffee is poured into the holder, it may damage the grinder.
•Sugar damages the machine!
Do not fill the machine with coffee beans treated with caramel, sugar or similar substances or instant coffee or other
substances containing sugar.
• Boiling water and steam may cause scalding, so these functions should be used with the utmost care. Never direct the
steam distributor towards parts of the body. It may cause scalding!
• Always ensure that the steam selector is disconnected when no steam is required. Otherwise, steam may escape
unintentionally. It may cause scalding!
• The water/steam distributor gets very hot during use. Only hold the distributor by the handle. It may cause scalding!
• Depending on the lime content of the water, the machine should be descaled regularly with a citric acid solution. In areas
of very hard water, the water pipes should be descaled more frequently.
The manufacturer will not be held liable for any damage caused by inadequate descaling.
Follow the mixing instructions indicated on the descaling pack. Otherwise, the machine may get damaged.
• Do not lean on the open drawer of the coffee machine, as this may damage the machine.
• If the coffee machine is built in with an oven with a pyrolytic cleaning function, disconnect the coffee machine during
pyrolytic cleaning, otherwise it may get damaged.
N.B. The coffee machine has a patent that allows you to empty the used coffee from the filter holder without
shaking it.
The manufacturer cannot be held liable for any damage caused by failure to observe the safety instructions and
warnings.
%
AMC-3
DESCRIPTION AND OPERATION
The coffee machine has two heating systems, one for heating the water and one for the coffee. It is possible to prepare
boiling water (for tea) or to use the steam (for cappuccino) and to prepare espresso coffee.
Unlike most other machines, in this coffee machine, the beans can be ground just when they are required, allowing you to
taste the aroma of freshly ground coffee at its best.
If the cup used is smaller than the quantity programmed by the machine, the coffee supply can be interrupted at any time by
pressing button 1 (Figure 1A/B), which also enables the user to select the most suitable quantity.
The degree of grinding can also be set, by turning the knob on the left of the machine to select a more coarsely or more
finely ground mixture, depending on the user’s requirements.
The boiling water supplied by the machine is particularly suitable for preparing tea, as the temperature is ideal.
The coffee machine lighting comes on automatically when the machine is switched on by pressing the on/off switch.
For safety reasons, the coffee machine switches off automatically as soon as it is taken out of the cabinet.
The boiling water from the distributor can also be used to preheat the cups.
If the coffee machine is not used for 120 minutes, it goes on stand-by automatically, reducing consumption to the essential
minimum, while still keeping the heating systems hot.
Fig. 1A
Fig. 1B
&
AMC-3
N.B. Owing to the weight of the machine, the cabinet must be secured firmly to the wall.
1. Check that the opening dimensions can accommodate the machine (Fig. 2A/B).
Fig. 2A
ON/OFF
ON/OFF
506
595
279
Min 290
19
438
458
450
±2
560
+6
600
INSTALLATION OF THE MACHINE
'
AMC-3
Fig. 2B
INSTALLATION OF THE MACHINE
AMC-3
2. Fix the 4 brackets Ato the 4 corners of the cabinet opening, using the appropriate screws (Fig. 3).
The horizontal movement of the nut allows any width tolerance of the cabinet to be offset.
3. Fix the 2 angular brackets Bto the machine (Fig. 3). The 2 vertical holes on the brackets allow the height of the machine
to be levelled and aligned.
4. Connect the machine to the electricity supply, observing the current safety regulations.
Important : The current plug must be reachable after the installation of the machine.
5. Place the machine in the centre of the cabinet, taking care that the horizontal side of the 2 angular brackets Bare slotted
into the appropriate holes on the brackets A(Fig. 3).
6. Open the machine by lifting the handle and pulling outwards, taking care not to pull it out of the cabinet (Fig. 4).
7. Secure the machine using the appropriate screws C(Fig. 4).
8. Close the machine.
The manufacturer declines any responsibility for persons or property and for the incorrect operation of the machine
if the above instructions are not observed in full.
Fig. 3
INSTALLATION OF THE MACHINE
ON/OFF
ON/OFF
B
B
A
A
B
Indice
Altri manuali Hotpoint Macchina per il caffè
Hotpoint
Hotpoint CM TDC EU Manuale utente
Hotpoint
Hotpoint MCX103X Manuale utente
Hotpoint
Hotpoint CM 9945 H Manuale utente
Hotpoint
Hotpoint CM TDC UK Manuale utente
Hotpoint
Hotpoint HCM10 Manuale utente
Hotpoint
Hotpoint MF IDC AX0 Manuale utente
Hotpoint
Hotpoint HCM15 Manuale utente
Hotpoint
Hotpoint CMHPCGC0 Manuale utente
