Hoymiles HAT-5.0HV-EUG1 Manuale utente

HAT-5.0HV-EUG1

HAT-6.0HV-EUG1

HAT-8.0HV-EUG1

HAT-10.0HV-EUG1

Open Energy for All

Quick Installation Guide

AC-coupled Inverter

hoymiles.comRegion: Global REV1.1

1 General Declaration

AC-coupled Inverter Quick Installation Guide

2 Packing List

Bracket*1Communication Box*1Double RowPlug*1

Document*1

EPS Connector*1

Grid Connector*1

GeneratorConnector*1

Ground Terminal*1

M4 Setscrew*1

DTS*1

Accessories packing list

M3 Setscrew*6Communication

Terminal*12 ACTerminal*15

BatteryConnector(+)*1

BatteryConnector(-)*1

M6 Expansion Screw*4

Sleeve*4

Optional (Wi-Fi, Ethernet, 4G)Smart Meter*1CT*3

• The information in this quick installation guide is subject to change due to product updates or other reasons.

• This guide cannot replace the product labels or the safety precautions in the user manual unless otherwise

specified. All descriptions here are for guidance only.

• Before installations, read through the quick installation guide and the user manual to learn about the product

and the precautions.

• All installations should be performed by trained and knowledgeable technicians who are familiar with local

standards and safety regulations.

• Check the deliverables for correct model, complete contents, and intact appearance. Contact the manufacturer

if any damage is found or any component is missing.

• Use insulating tools and wear personal protective equipment when operating the equipment to ensure

personal safety. Wear anti-static gloves, clothes, and wrist strip when touching electron devices to protect the

inverter from damage. The manufacturer shall not be liable for any damage caused by static electricity.

• Strictly follow the installation, operation, and configuration instructions in this guide and user manual. The

manufacturer shall not be liable for equipment damage or personal injury if you do not follow the instructions.

• All cables in this article are copper cables.

Inverter*1

RJ45 Coupler*1

3 Mounting the Inverter

4 5

Hybrid Inverter Quick Installation Guide

≥200 mm

≥300 mm

≥200 mm

≥500 mm

≥300 mm

≥15°

123

75 mm 75 mm

65 mm

AC-coupled Inverter Quick Installation Guide

4 Wiring Diagram

Wiring diagram for countries such as Australia, New Zealand, South Africa, etc.

Please follow local wiring regulations.

AC-coupled Inverter Quick Installation Guide

E-BAR

Battery

BMS

Backup

Loads

Smart

Meter

RCD

Grid

Normal Loads

Distribution Box

PE or

EPS

GRID

Meter

L1 L2 L3 NPE

CT1

CT2

CT3 Utility

meter

RCD

ʕʗ

Do not connect this terminal

when the neutral wire and PE

wire are connected together.

N-BAR

E-N

Link

HAT-HV series

Generator

/Inverter

GEN

CT1

Smart

Meter

CT2

CT3

LOAD GRIDLOAD GRID

or Do not connect this terminal

when the neutral wire and PE

wire are connected together.

RJ45

Coupler

INV GENINV GEN

Note:

If the battery has integrated a readily accessible internal DC breaker, then no additional ①DC breaker is required.

AC-coupled Inverter Quick Installation Guide

The use of

⑦⑧

30 mA RCD is recommended but not mandatory; please comply with local regulations for the system installation.

Model

HAT-5.0HV-EUG1 25 A/600 V

DC Breaker

HAT-6.0HV-EUG1

HAT-8.0HV-EUG1

HAT-10.0HV-EUG1

25 A/600 V

DC Breaker

40 A/600 V

DC Breaker

40 A/600 V

DC Breaker

20 A/400 V

AC Breaker

25 A/400 V

AC Breaker

32 A/400 V

AC Breaker

32 A/400 V

AC Breaker

Depends

on Loads

Main

Breaker

30 mA

RCD

① ② ④ ⑤ ⑦⑧③

16 A/400 V

AC Breaker

16 A/400 V

AC Breaker

20 A/400 V

AC Breaker

25 A/400 V

AC Breaker

16 A/400 V

AC Breaker

16 A/400 V

AC Breaker

20 A/400 V

AC Breaker

25 A/400 V

AC Breaker

⑥

E-BAR

Battery

BMS

Backup

Loads

Smart

Meter

RCD

Grid

Normal Loads

Distribution Box

PE or

EPS

GRID

Meter

L1 L2 L3 NPE

CT1

CT2

CT3 Utility

meter

RCD

ʕʗ

Do not connect this terminal

when the neutral wire and PE

wire are connected together.

N-BAR

E-N

Link

HAT-HV series

Generator

/Inverter

GEN

CT1

Smart

Meter

CT2

CT3

LOAD GRIDLOAD GRID

or Do not connect this terminal

when the neutral wire and PE

wire are connected together.

RJ45

Coupler

INV GENINV GEN

Wiring diagram for other countries, please follow local wiring regulations.

AC-coupled Inverter Quick Installation Guide

E-BAR

Battery

BMS

Backup

Loads

Smart

Meter

RCD

Grid

Normal Loads

Distribution Box

PE or

EPS

GRID

Meter

L1 L2 L3 NPE

CT1

CT2

CT3 Utility

meter

RCD

ʕʗ

HAT-HV series

Generator

/Inverter

GEN

CT1

Smart

Meter

CT2

CT3

LOAD GRIDLOAD GRID

RJ45

Coupler

INV GENINV GEN

Note:

If the battery has integrated a readily accessible internal DC breaker, then no additional ①DC breaker is required.

The use of ⑦⑧ 30 mA RCD is recommended but not mandatory; please comply with local regulations for the system installation.

AC-coupled Inverter Quick Installation Guide

Model

HAT-5.0HV-EUG1 25 A/600 V

DC Breaker

HAT-6.0HV-EUG1

HAT-8.0HV-EUG1

HAT-10.0HV-EUG1

25 A/600 V

DC Breaker

40 A/600 V

DC Breaker

40 A/600 V

DC Breaker

20 A/400 V

AC Breaker

25 A/400 V

AC Breaker

32 A/400 V

AC Breaker

32 A/400 V

AC Breaker

Depends

on Loads

Main

Breaker

30 mA

RCD

① ② ④ ⑤ ⑦⑧③

16 A/400 V

AC Breaker

16 A/400 V

AC Breaker

20 A/400 V

AC Breaker

25 A/400 V

AC Breaker

16 A/400 V

AC Breaker

16 A/400 V

AC Breaker

20 A/400 V

AC Breaker

25 A/400 V

AC Breaker

⑥

E-BAR

Battery

BMS

Backup

Loads

Smart

Meter

RCD

Grid

Normal Loads

Distribution Box

PE or

EPS

GRID

Meter

L1 L2 L3 NPE

CT1

CT2

CT3 Utility

meter

RCD

ʕʗ

HAT-HV series

Generator

/Inverter

GEN

CT1

Smart

Meter

CT2

CT3

LOAD GRIDLOAD GRID

RJ45

Coupler

INV GENINV GEN

5 Electrical Connection

Step 1 Grounding Protection Wire

Step 2 Grid (Same wirings for GEN if needed)

1.2 N·m

L=H+(2-3) mm

S≥4 mm²

Step 3 EPS

S H

1 2

13 mm≤≤18 mm S=4 mm²

7-8 mm

20-25 mm

4 mm²≤S≤6 mm²

7-8 mm

20-25 mm

1.2 N·m

13 mm≤≤18 mm

1.2 N·m

Click

AC-coupled Inverter Quick Installation Guide

Step 4 Battery

321

Click

3 4

BAT+

BAT-

BAT+

BAT-

:4-6 mm

S=6 mm²

ΦS

7-8 mm

Step 5 Signal Communication (Connection of communication box is mandatory)

8-485A_2

7-485B_2

6-485A_1

5-485B_1

4-CANL

3-CANH

2-DI IN-

1-DI IN+

8-NC

8-485B

8-485A_2

7-NC

7-485A

7-485B_2

6-NC

6-485A_1

5-485B

5-CANL

5-485B_1

4-485A

4-CANH

4-CANL

3-NC 3-NC

3-CANH

2-NC

2-DI IN-

1-NC

1-DI IN+

MRDID

Para1

120 Ohm

ON OFF

4 6 8

IN- D2/6 D4/8 REF

1OD753

21MOC7/3D5/1D+NI

NO1 COM1

2araPSMBreteM

DO2

1 2

NO2 COM2

AC-coupled Inverter Quick Installation Guide

Label

Meter (485A, 485B)

BMS (CANH, CANL, 485A, 485B)

DRM (D1/5, D2/6, D3/7, D4/8, REF, COM)

DI (IN-, IN+)

Parallel (DI IN+, DI IN-,CANH, CANL, 485A_1,

485B_1, 485A_2, 485B_2)

120 Ohm (ON, OFF)

DO1 (NO1, COM1)

DO2 (NO2, COM2)

Description

For the Smart Meter.

For Li-ion battery, communication is via CAN or RS485.

For external Demand Response Enabling Device.

Dry-contact input of external bypass contactor.

For parallel operation.

120 Ohm termination resistor for parallel operation.

RJ45 Terminal Connection (METER, BMS)

2 3

AC-coupled Inverter Quick Installation Guide

Dry-contact output. The DO2 will control the bypass

contactor under certain logic.

Dry-contact output. The DO1 can be set to one of the

functions as follows: Earth Fault Alarm, Load Control

and Generator Control.

0.6-0.8 N·m

40 mm

6-7 N·m

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Hoymiles Invertitore

Hoymiles

Hoymiles HM-1000N Manuale utente

Hoymiles

Hoymiles MI-500 Manuale utente

Hoymiles

Hoymiles HMT-1800 Series Manuale utente

Hoymiles

Hoymiles HM-500T Manuale utente

Hoymiles

Hoymiles HMS-700-2T Manuale utente

Hoymiles

Hoymiles HM-600 Manuale utente

Hoymiles

Hoymiles HME-1200-AU Manuale utente

Hoymiles

Hoymiles eLumen HMT-1800 Manuale utente

Hoymiles

Hoymiles MI-1000N Manuale utente

Hoymiles

Hoymiles MI-1000 Manuale utente

Hoymiles

Hoymiles HMT-1600-4T Manuale utente

Hoymiles

Hoymiles MI-300 Manuale utente

Hoymiles

Hoymiles HMT-1800 Series Manuale utente

Hoymiles

Hoymiles DTU-G100 3rd Gen Manuale utente

Hoymiles

Hoymiles HMS-1600-4T Manuale utente

Hoymiles

Hoymiles MI-300NT Manuale utente

Hoymiles

Hoymiles HA S-3.0LV-EUG1 Manuale utente

Hoymiles

Hoymiles HYS-3.0LV-EUG1 Manuale utente

Hoymiles

Hoymiles HMS-1000-2T Manuale utente

Hoymiles

Hoymiles HYS-3.0LV-EUG1 Manuale utente

Hoymiles

Hoymiles MI-1000T Manuale utente

Hoymiles

Hoymiles HM-300 Manuale utente

Hoymiles

Hoymiles HMS-1400C-4T Manuale utente

Hoymiles

Hoymiles HM-600N Manuale utente

Manuali Invertitore popolari di altre marche

Fourgroup

Fourgroup Easy Manuale utente

Velleman

Velleman PI300M Manuale utente

Sungrow

Sungrow SG350HX-US Manuale utente

WilTec

WilTec 61897 Manuale utente

SMA

SMA SUNNY BOY STORAGE 2.5 Manuale utente

Simplicity

Simplicity LANDLORD 316 Manuale utente

Santak

Santak SMAX 3000 Manuale utente

ATON

ATON RA.Store-3 Manuale utente

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuale utente

Tektronix

Tektronix CFG250 Manuale utente

Champion

Champion 200989 Manuale utente

Vanner

Vanner 20-500 Series Manuale utente

GE GEP Manuale utente

Astrel Group

Astrel Group Power Reducer Guida rapida

MULTIQUIP

MULTIQUIP GDP-5H Guida

GoWISE

GoWISE PS1007 Manuale utente

Promate

Promate PM13500D ES Manuale utente

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuale utente