HP AJ765A - StorageWorks RDX Removable Disk Backup... Manuale utente

Altri manuali per AJ765A - StorageWorks RDX Removable Disk Backup...

9

Indice

Altri manuali HP Accessori

HP

HP 245161-B22 - 10642 42U Rack Shock Pallet Manuale utente

HP

HP L1520 - 15 Inch LCD Monitor Manuale utente

HP

HP p1535a Manuale

HP

HP 8NN78AA ABB Manuale utente

HP

HP C8000 - Workstation - 0 MB RAM Manuale utente

HP

HP C6050a Manuale utente

HP

HP 8081A Manuale di servizio

HP

HP MSM415 Manuale utente

HP

HP Scanjet 5370C Series Manuale utente

HP

HP 8517B Manuale di istruzioni e di sicurezza

HP

HP L1520 - 15 Inch LCD Monitor Manuale utente

HP

HP CC487-91209 Istruzioni di installazione e manutenzione

HP

HP Kayak XA-s Series 02 Manuale utente

HP

HP TPA-M002P Manuale utente

HP

HP 11792A Manuale utente

HP

HP L1510 - 15 Inch LCD Monitor Manuale utente

HP

HP 245161-B22 - 10642 42U Rack Shock Pallet Manuale utente

HP

HP MCS Manuale utente

HP

HP Support Anywhere Manuale utente

HP

HP Workstation x1000 Manuale

HP

HP Model 744 - VME Workstation Guida di riferimento

HP

HP E1399A Manuale utente

HP

HP 930C Manuale utente

HP

HP 8691B Manuale di servizio

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente

HP StorageWorks RDX DL Server Module

Installing the unit

HP StorageWorks RDX DL Server Module is an internal assembly for a Proliant DL server. It is

supplied with a USB and a power cable.

1. Power down the server, remove the power cord and then remove the access panel.

2. If an optical drive is already installed, remove it, leaving the SATA cable connected to the system

board. You can re-use the drive and cable with the HP StorageWorks RDX DL Server Module.

3.

Remove the optical drive cage from the server, as instructed in the HP ProLiant Server User Guide.

Retain the screws.

4. Install and route the supplied

power and USB cables from the

server’s system board.

1 internal USB connector

2 power connector

3 SATA optical drive connector

(optional)

5. Slide the HP StorageWorks RDX DL Server Module partially into the empty server bay.

6. Connect the other end of the power

and USB cables to the connectors

on the rear of the HP StorageWorks

RDX DL Server Module.

1 USB connector

2 power connector

3 SATA optical drive connector

(optional)

© 2009 by Hewlett-Packard

Development Company, L.P.

7. If you wish to use the optical drive, remove the blank from the HP StorageWorks RDX DL Server

Module and insert the CD or DVD drive that you removed in step 2. Reconnect the SATA cable

to the rear of the optical drive.

8. Push the HP StorageWorks RDX DL

Server Module fully into the bay

and secure it using the screws that

you removed in step 3.

1 Install HP StorageWorks RDX DL

Server Module

2 Secure with screws

9. Replace the server covers and power cable, power up the server, as instructed in the HP ProLiant

Server User Guide. Refer to the HP RDX Backup System User Guide for operating and

troubleshooting information.

Returning the unit

IMPORTANT:

Do not return the complete HP StorageWorks RDX DL Server Module.

Follow the troubleshooting processes in the appropriate optical drive or RDX user guide. If

there is an issue that requires replacement, follow the instructions below.

If there is a problem with the optical drive, remove it and return for servicing.

If there is a problem with the RDX

Removable Disk Backup System, detach the

cables, remove the four screws that secure

the RDX unit to the module and keep them

safe for use with the replacement module.

Remove the RDX unit from the module and

return it for servicing. It is important to

retain the cables; the replacement unit

does not include cables.

Return details are different for the two

units; details can be found on the base of

the units after you remove them.

5697-7882