HP RC5 Manuale utente
1
About this Guide
The content in this document is for information purpose and is subject to
change without prior notice. We have made every effort to ensure that
this User Guide is accurate and complete. However, no liability is assumed
for any errors or omissions that may have occurred. The manufacturer
reserves the right to change the technical specifications or accessories
without prior notice.
Regulatory notices
This document provides country and region specific non wireless and
wireless regulatory notices and compliance information for your product.
Some of these notices may not apply to your product.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or
Battery by users in private households in the European nion
This symbol on the product or on the packaging indicates
that this cannot be disposed of as a household waste. You
must dispose of your waste equipment and/or battery by
handling it over to the applicable take back scheme for
the recycling of electrical and electronic equipment and/or
battery. For more information about recycling of this
equipment and/or battery, please contact your city office,
the shop where you purchased the equipment or your
household waste disposal service. The recycling of
materials will help to conserve natural resources and
ensure that it is recycled in a manner that protects human
health and environment.
2
CE Regulatory Notice
The product herewith complies with the requirements of the Low
Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU, and
the RoHS Directive 2011/65/EC.
Notes on Installation
1. Make sure that the lens is within the wiping range of the
windscreen wiper to ensure a clear view even when it rains.
2. Do not touch the lens with your fingers. Finger grease may be left
on the lens and will result in unclear videos or pictures. Clean the
lens on a regular basis.
3. Make sure that the installation position is not hindered by the
tinted window.
4. This product is suitable for light windshield or light color
heat resistant film windows , it will affect video quality if install it
on the dark windows or dark heat resistant film windows.
1Introduction
Thank you for purchasing this advanced Full HD rear camera. This
product is specifically designed for supporting HP car camcorder real
time video recording when driving.
1.1 Features
•Full HD recording videos (1920x1080P@25fps)
•Switch for rear view or in car recording
•Sony’s Starvis sensor
3
1.2 Package Contents
The package contains the following items. In case there is any
missing or damaged item, contact your dealer immediately.
Rear Camera User Manual USB Cable
1.3 Product Overview
No. Item––
No. Item
1 Wide Angle Lens 4 Camera Rotation Shaft
2 Base 5 Rear/ front image switch
3 Micro USB Connector Port 6 LED indicator
4
2Getting Started
2.1 Mount Rear Camera to the Windshield
1. Adjust rear camera position as the picture shown. Please
check the preview image is in right position (not upside down)
before installation. If the preview image is upside down,
please rotate the base 180∘to make it correct, or make sure
switch is REAR or FRONT position.
Rear view recording
In car recording
2. Connect the USB cable with primary camcorder and power it
on to enter preview screen and confirm the field of view. Then
clean the surface of the windshield with alcohol to ensure that
the adhesion surface is clean.
3. Remove the transparent film on the base of rear camera, and
then hard press rear camera to ensure firmly stuck.
5
Note:
1. Do not install the device on a tinted window. Doing so may damage the tint film.
2. This product is suitable for light windshield or light color heat resistant film
windows, it will affect video quality if install it on the dark windows or dark
heat resistant film windows.
2.2 Adjust Rear Camera
2.2.1 Record Rear View
1. Once the rear camera is mounted to the rear windshield, the
lens should be rotated to accommodate external rear view as
shown by the illustrations below.
2. Slide the switch to “Rear”.
3. Use the preview screen from front camera to fine tune the
desired lens angle.
6
2.2.2 Record Inside the Vehicle
1. Once the rear camera is mounted to the rear windshield, the
lens should be rotated to accommodate internal cabin view as
shown by the illustrations below.
2. Slide the switch to “Front”.
7
3. Use the preview screen from front camera to fine tune the
desired lens angle.
Note: We recommend users to disconnect micro USB from rear camera before
adjusting.
2.3 Connect and Set p Rear Camera
Use the USB cable in the rear camera package to connect with front
camera and rear camera.
(Front camera is not included in the package. Please contact
distributor for further information.)
1. Plug phone jack into front camera’s 2CH port. (Front camera is
power off.)
8
2. Plug the other end of USB cable (micro USB connector) to rear
camera’s USB port.
3. Turn on front camera’s power, the rear camera image will be shown
on the right down corner of front camera screen. According to
different models, press Power button on front camera to
switch front or rear image.
Note:
1. Install rear camera at upper central position of the rear windshield.
2. Rear camera doesn’t support hot Plug n Play. Please turn off the front camera
before plugging the rear camera.
Indice
Altri manuali HP Accessori per automobili
