HP dx7500 - Microtower PC Manuale utente
Computer Setup (F10) Utility Guide - dx7500
Models
HP Compaq Business PC
© Copyright 2008 Hewlett-Packard
Development Company, L.P. The
information contained herein is subject to
change without notice.
Microsoft, Windows, and Windows Vista are
either trademarks or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
The only warranties for HP products and
services are set forth in the express warranty
statements accompanying such products
and services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for technical
or editorial errors or omissions contained
herein.
This document contains proprietary
information that is protected by copyright. No
part of this document may be photocopied,
reproduced, or translated to another
language without the prior written consent of
Hewlett-Packard Company.
Computer Setup (F10) Utility Guide
HP Compaq Business PC
dx7500 Models
First Edition (August 2008)
Document Part Number: 498184-001
About This Book
This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and
modify computer default settings when new hardware is installed and for maintenance purposes.
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily
harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage
to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
ENWW iii
iv About This Book ENWW
Table of contents
Computer Setup (F10) Utility
Computer Setup (F10) Utilities ............................................................................................................. 1
Using Computer Setup (F10) Utilities .................................................................................. 1
Computer Setup—Main ....................................................................................................... 2
Computer Setup—Advanced ............................................................................................... 3
Computer Setup—Power ..................................................................................................... 4
Computer Setup—Boot ........................................................................................................ 4
Computer Setup—Exit ......................................................................................................... 5
Recovering the Configuration Settings ................................................................................................. 6
ENWW v
vi ENWW
Computer Setup (F10) Utility
Computer Setup (F10) Utilities
Use Computer Setup (F10) Utility to do the following:
●Change factory default settings.
●Set the system date and time.
●Set, view, change, or verify the system configuration, including settings for graphics, audio, storage,
communications, and input devices.
●View settings for processor and memory.
●Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or
USB flash media devices.
●Run hard drive self-tests.
●Establish a supervisor password that controls access to Computer Setup (F10) Utility and the
settings described in this section.
Using Computer Setup (F10) Utilities
Computer Setup can be accessed only by turning the computer on or restarting the system. To access
the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer.
2. As soon as the computer is turned on, press F10 before the computer boots to the operating system
to enter Computer Setup.
NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again
press F10 when the monitor light turns green to access the utility.
3. The Computer Setup Utility screen is divided into menu headings and actions.
Five menu headings appear on the Computer Setup Utility screen:
●Main
●Advanced
●Power
●Boot
●Exit
ENWW Computer Setup (F10) Utilities 1
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen, press
Esc.
CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10)
changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting
the F10 Setup screen.
Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 1 Computer Setup—Main
Option Description
System Time Allows you to set system time.
System Date Allows you to set system date.
Language Allows you to select language.
Floppy Diskette A:Allows you to set drive A to:
●Disabled
●1.44 MB 3.5”
●Not Installed
1st Drive
2nd Drive
3rd Drive (not used)
4th Drive (not used)
5th Drive
6th Drive
For each, allows you to:
●(view only)
◦Capacity (Size - HDD only)
◦Transfer Mode
●Smart Support - run HDD self-test for selected channel:
◦SMART Status Check
◦SMART Short Self-Test
◦SMART Extended Self-Test
System Information (view only)
●Installed Memory
●Memory Bank 1
●Memory Bank 2
●Memory Bank 3
●Memory Bank 4
●BIOS Revision
●Core Version
●Model Number
2 Computer Setup (F10) Utility ENWW
●Product Number
●Asset Tag (press Enter to change)
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.
Table 2 Computer Setup—Advanced
Option Description
CPU Type (view only)
CPU Speed (view only)
Cache RAM (view only)
Primary Video Adapter Allows you to select the boot display device when more than 2 video options are offered by the
system:
●Integrated (Onboard)
●PCI-Ex16
Onboard Video
Memory Size
●Disabled
●Enabled, 32MB
PS/2 Mouse Allows you to set:
●Disabled
●Enabled
●Auto Detect
USB Ports Allows you to enable/disable all USB ports.
Onboard LAN Allows you to disable/enable onboard LAN controller.
Onboard LAN Boot
ROM
Allows you to disable/enable the boot ROM of the onboard LAN chip.
SATA1 Controller Allows you to disable/enable the SATA1 Controller.
SATA1 Controller
Mode
If SATA1 Controller is enabled, allows you to set the mode to:
●IDE
●AHCI
●RAID
Onboard Audio Allows you to set the onboard audio to:
●Auto
●Disabled
●Enabled
ENWW Computer Setup (F10) Utilities 3
Internal Speaker Allows you to set the internal speaker to:
●Disabled
●Enabled
Supervisor Password Allows you to view the supervisor password.
User Password Allows you to view the user password.
Onboard 1394 Allows you to enable/disable all 1394 ports.
Change Supervisor
Password
Allows you to change the supervisor password.
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3 Computer Setup—Power
Option Description
After AC Power Failure Allows you to select system restart behavior after power loss:
●Stay Off
●Power On
●Auto
XD Disables/enables XD bit.
Virtualization
Technology
Allows you to enable/disable Virtualization Technology.
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 4 Computer Setup—Boot
Option Description
Boot-time Diagnostic
Screen
Disables/enables POST diagnostic messages display.
(Boot Device Priority)
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●Floppy Group
●CD-ROM Group
●Hard Drive Group
●Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Table 2 Computer Setup—Advanced (continued)
4 Computer Setup (F10) Utility ENWW
Altri manuali per dx7500 - Microtower PC
5
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali HP Scrivania
HP
HP Model 745 - VME Workstation Manuale utente
HP
HP A320m - Pavilion - 256 MB RAM Manuale utente
HP
HP Compaq dc7800 Series Manuale per l'uso e la cura
HP
HP Vectra XA 5 Series Manuale utente
HP
HP Net PC 20 Manuale utente
HP
HP Visualize j6000 Manuale di riferimento
HP
HP Pavilion Elite d5200 Manuale di istruzioni
HP
HP Compaq dc5700 Small Form Factor Business Istruzioni per il montaggio
HP
HP Pavilion t322 Manuale utente
HP
HP Brio BA400 Manuale utente
HP
HP CQ5110F - Presario - 3 GB RAM Manuale utente
HP
HP Pro 3420 Manuale utente
HP
HP e-PC c10/s10 Manuale utente
HP
HP D7171A - NetServer - LPr Manuale utente
HP
HP 280 G4 Istruzioni per il montaggio
HP
HP Omni Pro 110 Guida all'installazione
HP
HP PL Class 450/500/550/600/650/700/750 Manuale
HP
HP Kayak XU700 Manuale del prodotto
HP
HP Blade Blade Manuale utente
HP
HP Xw4550 - Workstation - 2 GB RAM Guida di riferimento
