HP Z27i Istruzioni per l'installazione

EL-MF877-00

Template Revision B

Page1

PSG instructions for this template are available at EL-MF877-01

Product End-of-Life Disassembly Instructions

Product Category: Monitors

Marketing Name / Model

[List multiple models if applicable.]

HP Z27i 27-inch IPS Display

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description

Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Interface board, power board, control board, USB

board

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 1

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

power board

External electrical cables and cords DVI cable*1, Power cord*1, USB cable*1, DP

cable*1

All are inside monitor carton box

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent 0

EL-MF877-00

Template Revision B

Page2

PSG instructions for this template are available at EL-MF877-01

including liquids, semi-liquids (gel/paste) and toner

chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Screw driver

Hexagonal inserted handle box wrench

Diagonal cutting nippers

Description #4

Description #5

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Use tool to separate head and stand.

2. Use tool to release screws and disassemble the rear cover by hand.

3. Separate rubber and RC by hand.

4. Tear AL-tape and acrylic adhesive tape off and separate FFC wire from connecter.

5. Remove USB SHD and use tool to release screw.--> Separate USB BD from Main Chassis.

6. Take the lamp wire off from panel and use tool to release side mount screws.

7. Use tool to release screws on PCBs. Then tear down the gaskets, rubber and AL tapes on main chassis and separate

all connector on PCBs.

8. Use tool to release screws on CTRL BD and take Ctrl BD off from assy-BZL.

9. Use tool to separate OSD-BTN and PWR-BTN parts from BZL. And use pin at back side to separate the logo.

10. Use tool to release screws and separate VESA BKT from stand.

11. Separate cable clip from stand by hand.

12. Separate Lift front CVR from stand by hand and use tool to release screws --> separate Lift back CVR from stand.

13. Use tool to release screws --> separate tilt CVR from stand.

14. Separate Clum front CVR from stand by hand and use tool to release screws --> separate Clum back CVR from stand.

15. Tear all rubbers and release screws on base.

16. There are capacitors on Interface BD , PWR BD and USB BD

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00

Template Revision B

Page 3

PSG instructions for this template are available at EL-MF877-01

Step 1 :Use quick release button to separate head and stand.

Step 2 : Use tool to release screws and disassemble the rear cover by hand..

EL-MF877-00

Template Revision B

Page 4

PSG instructions for this template are available at EL-MF877-01

Step 3 : Separate information card and RC by hand.

Step 4 : Use tool to release screws and disassemble quick release button and slider by hand.

Step 5 : Remove the LVDS cable adhesive tape and eparate assy-BZL and internal.

EL-MF877-00

Template Revision B

Page 5

PSG instructions for this template are available at EL-MF877-01

Step 6 :. Remove USB SHD and use tool to release screw.--> Separate USB BD from Main Chassis.

Step 7 : Take the lamp wire off from panel and use tool to release side mount screws.

EL-MF877-00

Template Revision B

Page 6

PSG instructions for this template are available at EL-MF877-01

Step 8 : Use tool to release screws on PCBs. Then tear down the gaskets, rubber and AL tapes on main chassis and separate all

connector on PCBs.

Step 9: Use tool to release screws on CTRL BD and take Ctrl BD off from assy-BZL.

EL-MF877-00

Template Revision B

Page 7

PSG instructions for this template are available at EL-MF877-01

Step 10: Use tool to separate OSD-BTN and PWR-BTN parts from BZL. And use pin at back side to separate the logo.

EL-MF877-00

Template Revision B

Page 8

PSG instructions for this template are available at EL-MF877-01

Step11: Use tool to release screws and separate base

Step12: Use tool to release screws and separate base cover and base SHD

EL-MF877-00

Template Revision B

Page 9

PSG instructions for this template are available at EL-MF877-01

Step13: Use tool to release screws and separate VESA from stand

Step14 : Use tool to release screws and separate VESA BKT and VESA cover

Step15 : Disassemble the middle cover by hand

EL-MF877-00

Template Revision B

Page 10

PSG instructions for this template are available at EL-MF877-01

Step16 : Disassemble the front cover and back cover by hand

Altri manuali per Z27i

Altri manuali HP Monitor

HP L2314 Istruzioni per il montaggio

HP EliteDisplay E221c Guida all'installazione

HP M27h Manuale

HP KH128AA Manuale utente

HP Compaq LE1902x Istruzioni per l'installazione

HP HC270cr Istruzioni per l'installazione

HP TS 23W8H - 23" De-Branded Widescreen LCD Full HD 1080p... Come usare

HP OMEN 27 Manuale

HP Ergo 1600 Manuale utente

HP 70205A Manuale di installazione e funzionamento

HP Pavilion F1903 Guida all'installazione

HP W2338h - 23" LCD Monitor Manuale utente

HP L2105TM Manuale utente

HP E23 G4 Manuale

HP L1815 Manuale utente

HP 2011S Istruzioni per l'installazione

HP NL773A8#ABA Manuale utente

HP W2338h - 23" LCD Monitor Manuale utente

HP X27i Istruzioni per il montaggio

HP EliteDisplay LED Backlit Monitors Manuale utente

HP V24 Manuale

HP Compaq Advantage LA2306x Istruzioni utente

HP E24i G4 HO Istruzioni per il montaggio

HP W2338h Manuale del proprietario

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione