HP 205H-MNT2 Manuale utente

205H-MNT2 Wall Mount Kit

Installation Guide

0511763-03 | March 2015 1

Package Contents

Dual Gang Wall Mount

(x4) #6-32 Machine Screws

Plastic Front Cover

(x2) T8H Torx Security Screw

205H-MNT2 Wall Mount Kit Installation Guide

Introduction

The 205H-MNT2 Wall Mount Kit provides a secure and practical solution for mounting the 205H access

point to single and dual gang wall boxes.

Installing the 205H-MNT2 Wall Mount Kit

Use the following instructions to install the 205H-MNT2 Wall Mount Kit.

1. If the wall box is not already exposed, unscrew and remove the existing wall plate, as shown in Figure 1.

Figure 1 Removing Existing Wall Plate

2. Detach any RJ-45 cables by unclipping the connectors from the wall plate, or cutting/removing the UTP

cable(s).

3. Use a short Ethernet cable (sold separately, part number AP-CBL-ETH10) to connect the E0 port to an

RJ-45 connector, or crimp an RJ-45 plug (not supplied) to the cable, and insert into the E0 port. Do the

same for the PT port if used.

2205H-MNT2 Wall Mount Kit | Installation Guide

Installation for Single Gang Wall Box

If mounting the 205H-MNT2 Wall Mount Kit to a single gang wall box, refer to steps 4-5.

4. Align the screw holes on the mounting bracket with the corresponding holes on the single gang wall box,

as indicated in Figure 2.

Figure 2 Attaching Wall Mount to Single Gang Wall Box

5. Remove the #6-32 x 1 machine screws from their bag and screw the wall mount onto the wall box.

Installation for Dual Gang Wall

If mounting the 205H-MNT2 Wall Mount Kit to a dual gang wall box, refer to steps 6-7.

6. Align the screw holes on the mounting bracket with the corresponding holes on the dual gang wall box,

as indicated in Figure 3.

Figure 3 Attaching Wall Mount to Dual Gang Wall Box

205H-MNT2 Wall Mount Kit | Installation Guide 3

7. Remove the #6-32 screws from their bag and screw the wall mount onto the wall box, as shown in Figure

8. Connect any required cables to the rear of the access point.

9. Align the mounting slots on the back of your 205H access point with the corresponding posts on the wall

mount as shown in Figure 4.

Figure 4 Securing 205H access point to Wall Mount

10. Push the access point against the holes and then downward until the posts engage the slots at the top of

the mounting holes.

11. (Optional) Using the second T8H Torx security screw provided, insert into the hole on the upper-right

side of the mount and tighten to lock the 205H access point into the mount.

12. Position the prongs on the back of the front cover inside the slots on the front mount housing, as shown

in Figure 5.

Figure 5 Fitting Front Cover onto Wall Mount

0511763-03 205H-MNT2 Wall Mount Kit | Installation Guide

13. Slide the cover into the tracks toward the access point until the left side of the cover is level with the

side of the mount. Refer to Figure 6, demonstrating the cover sliding from open position (left) to locked

position (right).

Figure 6 Plastic Side Cover Sliding into Wall Mount (Rear View)

14. (Optional) Once the front cover is securely attached to the mount, insert one of the T8H Torx Security

Screw into the hole located at the left side of the cover and tighten until secure.

15. (Optional) If not using PoE, connect the AC-DC power adapter (sold separately, part number AP-CBL-

SER) to the DC power socket located on the right of the 205H access point.

Indice

Altri manuali HP Hardware di rete

HP StorageWorks X9720 Manuale di servizio

HP Compaq NC6133 Istruzioni utente

HP 634041-006 Guida di riferimento rapido

HP In/Out P2P 10/13dBi MIMO 3 Istruzioni per il montaggio

HP StorageWorks AB466A Manuale utente

HP BladeSystem C-Class Interconnect Component Istruzioni utente

HP A3550A - High Availability Disk Arrays Model 20 Storage... Manuale utente

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Manuale di programmazione

HP FF 12910 Istruzioni per il montaggio

HP ProCurve XL MINI-GBIC Manuale utente

HP 5900AF-48XG-4QSFP+ Istruzioni per il montaggio

HP StorageWorks X1000 G2 Come usare

HP Edgeline EL1000 Manuale utente

HP ProCurve Radio Port 230 Istruzioni per il montaggio

HP AdvanceStack Hub-8U J2610B Manuale di installazione e funzionamento

HP D7171A - NetServer - LPr Manuale utente

HP J9666A Manuale utente

HP X5000 G2 Manuale di servizio

HP Bc1500 - BladeSystem - Blade PC Manuale

HP 4265B Manuale di servizio

HP XP 9000 Manuale utente

HP ProCurve 8116fl Istruzioni per il montaggio

HP ProCurve Radio Port 210 Istruzioni per il montaggio

HP E5000 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente