HP lc200w Manuale utente
1
Thanks for purchasing the camera. Please read the instruction
manual on the supplied CD ROM to ensure correct use of the product.
The warranty does not cover any damage that may occur during a
sport activity.
Battery warning
Always charge using the provided system. Improper handling of
the battery may result in explosion.
Never dismantle or pierce the battery or allow the battery to
short-circuit.
Keep the battery out of reach of children.
Batteries may explode if exposed to open fire. Never place of
batteries in a fire.
isposed of used batteries observing local regulations.
Please use only the battery provided or recommended by the
manufacturer or dealer.
Battery model
Brand Name FUJI
Model Name FJ-SLB-10A
Power Rating 3.7Vdc, 1130mAh, 4.18Wh
Type Lithium-ion
For more operation details, please refer to CD
-
ROM.
2
1. Overall Introduction
1.1 Button operation
Top and bottom views
Side (
l
eft and
r
ight)
v
iews
Front
v
iew
Rear view
1
1
3
12
11
14
9
2
4
7
10
8
3
6
5
No.
Item
No.
Item
1
USB Connector
8
Mode indicator light
2
Memory card slot
9
Mode button
3
Power indicator light
10
Wi
-
Fi indicator light
4
Power button
11
Wi
-
Fi but
ton
5
L
CM screen
12
Microphone
6
Record
indicator light
13
Lens
7
Record Button
14
Magnet
3
1.2 Button operation
You can operate the camera without connecting to a mobile device via
Wi-Fi/App. See the table below for descriptions of each button.
Item
Function
Mode
button
Changing Modes (Time-lapse / Capture / Recording
Mode)
Shutter
button
•
••
•
In Camera mode, press the Shutter button to
capture a photo. Double click the shutter button
for self-timer photo taken, it will count down for 5
seconds with beep sounds.
•
••
•In Video mode, press the Shutter button to start
recording a video. Press it again to stop recording.
•
••
•In Time-lapse mode, press the Shutter button to
start recording a video. Press it again to stop
recording (When the camcorder enters Power
Saving Mode and is in shutdown status, press the
Power button to stop recording).
Wi-Fi
button Press to turn the Wi-Fi on or off.
Power
button
•
••
•Press to turn the camera on or off.
•
••
•To reset, press and hold the Power button for at
least 5 seconds.
4
2. Getting started
2.1 Inserting the memory card
1. Insert the memory card with the gold contacts facing the front
of the camcorder. Push the memory card until it clicks into
place.
2. To remove the memory card, push to eject the memory card
out of the slot.
Note
1. o not remove or insert the memory card when the camcorder is turned on. This
may damage the camcorder and memory card.
2. Please use a Class 10 or higher rating Micro S card, max up to 32GB.
3. Please format the micro S card before initial use.
5
2.2 Information in LCM screen
1
2
3
No.
Item Icon Description
1 Battery
status
Full battery power
2/3 battery power
1/3 battery power
Out of battery power
Charging
2 Wi-Fi
status
Wi-Fi on
Wi-Fi off
3 Status
Time-lapse mode
Capture mode
Recording mode
Memory card error (damaged, locked
or no card inside)
Memory card full
Connect with mobile
Enter USB mode when charging
Power will soon run out
6
2.3 Using Magic Sticker
1. Flip the magic sticker inside out.
2. Attach the mental part (a) to the
magnet on lc200w.
3. Stick the magic sticker (b) to any
clean surface.
4. Adjust manually the angle before
you take photos.
5. Use clean water to wash the magic
sticker when it is not stick enough,
then air-dry to complete dry.
6. After using the magic sticker,
recommend to flip back in order
to keep the product life time.
7
3. Initial set up
Install a micro S card (class 10 or higher rating, max up to 32GB) into
the camcorder.
3.1 Camcorder application installation
The camera allows you to connect to the mobile devices via the App.
When using for the first time, install the [Pixi Cam] App for your
mobile device.
1.
ownload Pixi Cam App from Google Play or App Store.
2.
Install the App.
3.2 Wi-Fi connecting
1. Press the Power button to switch on the camcorder.
2. Press the Wi-Fi button to activate the wireless network.
3. Using the Wi-Fi function of the mobile device, search for the
camcorder I from the list. Each camcorder has a unique I no.:
hplc200wXXXXXXX (The last 4 digits of the I will be as same
as the last 4 digits that displayed on the LCM screen.).
4. When connected to the Pixi Cam App , camcorder LCM
display will show , indicates the Wi-Fi is connected.
8
4. Using the Pixi Cam application
No.
Icon Item Description
1 Wi-Fi status Indicates the Wi-Fi status.
2
Battery
status
Indicates the estimated remaining
battery power.
3 Voice record
Touch to enable or disable the voice record
function.
Available options: On / Off
4 Playback Touch to enter Playback mode.
1
2
3
4
7
9
6
5
8
Recording screen
Shooting photos
1
2
10
11
4
7
14
6
12
13
Time-lapse screen
7
19
6
18
13
1
2
15
16
17
6
9
No.
Icon Item Description
5 Recording Touch to start recording, and touch
again to stop.
6
2015/01/01
12 00 00
ate and
time
Indicates the current recording date and
time.
7 Menu Touch to enter the menu.
8
Video
resolution Indicates the current video resolution.
9
Recording
mode
Indicates the current Recording mode.
Touch to switch to Time-lapse or Shooting
mode.
10
Capture
mode
Touch to select the capture mode.
Available options: Normal / 5 sec. / 10 sec.
/ Burst 3 Photos / Burst 5 Photos
11
Beauty Touch to select the Beauty mode.
Available options: 0 / 1 / 2
12
Shooting Touch to start shooting photos.
Altri manuali per lc200w
2
Indice
Lingue:
Altri manuali HP Telecamera di sicurezza
