HSC Master DHP20 Manuale utente

PRODUCT MANUAL

Serial Number Range:

Year Of Manufacture:

KEEP THIS BOOKLET FOR FUTURE REFERENCE

Nottingham: 0115 946 1988

London: 0208 830 3333

Nottingham: [email protected]o.uk

London: sean@hscgroupuk.co.uk

www.hscgroupuk.co.uk

The Hire Supply Company (UK) Limited

240 Volt

16 Litre Dehumidiﬁer

Product Code:

DHP20

I. EN - INSTRUCTION MANUAL

1 Device models............................................................................................................. 2

2 Product overview ........................................................................................................ 3

3 Control panel............................................................................................................... 4

4 About this operating manual ..................................................................................... 5

5 Product description .................................................................................................... 5

6 Safety ........................................................................................................................... 6

7 Transport and installation.......................................................................................... 7

8 Device operation and control..................................................................................... 8

9 Maintenance and care................................................................................................. 9

10 Troubleshooting.......................................................................................................... 11

11 Repair........................................................................................................................... 12

12 Decommissioning, storage and disposal ................................................................. 12

13 EC Declaration of Conformity.................................................................................... 13

1 Device models

This operating manual covers various device models. Their functions and operation are

however nearly identical To find out which model you have, refer to the type plate. For more

information, see Technical data.

Model Main features

DHP20 Extendable handle, carrier handle, 2 castors

2 Product overview

Illustration1: Front and rear view

1 Control panel 2 Recess for stacking

3 Castor 4 Base

5 Inlet air grille with filter holder 6 Handle

7 Operating hours counter 8 Cable winder

9 Air outlet 10 Carry handle

Button/indicator Description

Operating hours counter Display of operating hours

3 Control panel

Illustration2: Control panel

1 Hygrostat rotary selector 2 Red fault indicator

3 Yellow indicator 4 Device switch

5 Green indicator

Button/indicator Description

Device switch Switching device ON/OFF:

■Position [I]: Device continuously on

■Position [II]: Starting pump and draining off condensate

Indicators Operating status of device:

■Green: Device running

■Yellow: Device in defrosting mode

■Red: Fault, device shut down

Hygrostat rotary

selector

Setting desired target humidity When the set target humidity is

reached, the device is automatically switched off. If the air humidity

increases again, the device restarts automatically.

4 About this operating manual

This operating manual (hereinafter referred

to as the manual) allows the operator to op-

erate the humidifier (referred to as the

device) safely and efficiently.

Reproduction of this document or parts

thereof is only permitted with the explicit

written consent of HEYLO GmbH (herein-

after referred to as the manufacturer).

NOTICE!Before using the device, please

read this manual carefully. Keep this doc-

ument for future reference.

Safety signs and instructions

DANGER! Warning regarding an immin-

ent risk of injury

This safety instruction warns of an immedi-

ate dangerous situation which can lead to

serious injury or death.

WARNING! Warning of a potential risk to

human life.

This safety instruction warns of a poten-

tially hazardous situation which, if not

avoided, could result in death or serious in-

jury.

CAUTION! Warning of a potential risk to

human life.

This safety instruction warns of a poten-

tially hazardous situation which, if not

avoided, could result in minor to moderate

injury.

ATTENTION! Warning regarding damage

to property

These safety warnings highlight potential

risks of damage to the device.

Contact details of manufacturer

See rear cover.

5 Product description

The device dehumidifies the air in the room.

In the process, condensate collects in the

condensate tank from where it can be re-

moved by means of a built-in pump to a col-

lecting vessel or an on-site drain. The

device is automatically defrosted when ne-

cessary.

Scope of delivery

■Dehumidifier

■Drain hose

■Filter pad

■Operating manual

Optional accessory

■Prod. no. 1306539 Exhaust air adapter

for 1hose (100mm)

■Prod. no. 1306553 Exhaust air adapter

for 3hoses (3 x 50mm)

Type plate

The type plate is attached to the device.

Intended use

The device is intended solely for dehumidi-

fying air at atmospheric pressure in a com-

mercial environment.

Intended use also includes compliance with

the operating conditions (see Operating

conditions).

Any use other than the specified is deemed

improper. Improper use shall void all war-

ranty cover.

The air dehumidifier must not be operated

by children or by persons with limited phys-

ical, sensory or mental faculties.

Before operating the device, users must

have read and understood this operating

manual.

Reasonably foreseeable misuse

The device must not be used:

■In rooms/spaces that are not enclosed,

or outdoors

■In rooms with a potentially explosive or

aggressive atmosphere

■In rooms with air that has been treated

with ozone, or that contains a high con-

centration or solvents or dust.

■At locations where the prescribed min-

imum safety distances cannot be main-

tained

6 Safety

General safety instructions

■The device must only be operated by

persons who have been properly in-

structed in its operation.

■It is forbidden to make any modifica-

tions to device.

■Maintenance and troubleshooting tasks

must be performed by suitably qualified

persons only. Shut down the device and

disconnect the mains plug.

WARNING! Risk of explosion, injury from

burns or poisoning by refrigerant

The device is operated with an odourless

and flammable refrigerant. If the device is

operated incorrectly, there is a risk that the

refrigeration causes explosion, fire, poison-

ing or other injury. The refrigerant is pres-

surised.

ÜOnly operate the device in rooms larger

than 4m2.

ÜNever drill holes into the device, and do

not use welding equipment or cutting

torches in its vicinity.

ÜDo not attempt to speed up defrosting by

using implements.

ÜAll work on the refrigeration circuit must

be performed by staff of the manufac-

turer or an authorised technician.

ÜAvoid contact with the refrigerant.

ÜWhen handling the refrigerant, strictly

adhere to the applicable safety regula-

tions.

WARNING! Risk of electric shock

When carrying out work on electrically

powered components, or if such compon-

ents come into contact with water, there is a

risk of serious or even fatal injury from elec-

tric shock.

ÜAll work on the electrical equipment must

be carried out by qualified electricians.

ÜTake suitable measures to prevent elec-

trically powered components coming into

contact with water.

ÜBefore moving the device to a different

location, disconnect the mains plug and

empty the condensate tank.

WARNING! Risk of infection

The condensate may be contaminated with

pathogens.

ÜNever drink the condensate.

ÜRegularly pump off the condensate.

Avoid leaving condensate in the collect-

ing vessel or in the condensate drain

hose for a longer period of time.

Operating conditions

The device is intended for mobile or station-

ary use indoors, on construction sites, as

well as in garages and storage rooms. The

device operates efficiently:

■At temperatures between +5°C and

+32°C and within a relative air humidity

range of 40% to 100%.

Ideal room temperature range: 20°C to

27°C.

■In enclosed rooms where there is as

little air exchange as possible.

■Placed at close as possible to the

centre of the room.

■When the dry air discharged by the

device is directed towards the humid

part of the room.

Do not use the device under the following

ambient conditions:

■Rooms with a potentially explosive at-

mosphere, or an atmosphere containing

sulphur or salt.

■Atmospheres with high solvent or dust

concentration.

7 Transport and installation

Transport

WARNING! Risk of injury from device

toppling over

ÜTransport the device in an upright posi-

tion and secure it against tipping or slip-

ping.

ÜPlace the device on a level, firm surface.

WARNING! Risk of injury during machine

transport

ÜTo transport the device, use the handle

and the castors.

ÜFor heavy loads, work in teams of two

and use suitable lifting gear.

Procedure

1. Before transporting the device, empty

the condensate tank.

2. Ensure that the drain hose is removed

from the device and that the mains plug

is disconnected.

3. Transport the device to the location of

operation.

4. To transport heavy loads, work in teams

of two and use suitable lifting gear.

5. When the device is at its location of op-

eration, apply the castor brake.

NOTICE!Ensure that the air can circulate

freely around and through the device. Do

not cover the air inlet and outlet open-

ings. The distance between the air outlet

and the air filter must be minimum 1 m.

Unpacking

1. Remove the device from the cardboard

box and place it on the ground.

2. Check the scope of delivery for com-

pleteness.

Report any transport damage or incom-

plete delivery to your dealer.

Adjusting handle

1. Release the locking mechanism of the

handle, and pull out the handle to the de-

sired length.

Connecting drain hose

For operation, the supplied drain hose must

always be connected to the device.

ATTENTION! Poor device performance

ÜDo not kink the drain hose.

ÜDo not place any objects on the hose.

Procedure

1. Secure the quick-release coupling of the

drain hose to the connector at the rear of

the device.

2. Lead the drain hose away from the

device and place the free end in an on-

site drain opening or a sufficiently large

collecting vessel (maximum level differ-

ence: 6m).

Stacking devices

For operation or storage, it is permissible to

combine maximum two devices in a stack.

1. Do to this, loosen and fully retract the

handle of the device at the bottom.

2. Place the second device on the first one.

Ensure that the bases of the second

device slot into the recesses in the first

one.

Connecting device to electric power

mains

1. Ensure that the voltage of the power

mains corresponds to that specified in

Technical data.

2. Ensure that the mains socket is suffi-

ciently protected (see in Technical

data).

3. The power socket to which the device is

connected must be equipped with a RC

circuit breaker. This is particularly import-

ant for operation in humid rooms and on

construction sites.

4. Make sure that the mains socket is

earthed and matches the power plug of

the device.

5. Connect the power plug into the mains

socket.

8 Device operation and control

Prior to switching on

1. Make sure that the device is not standing

on a wet ground and ensure that it is in

an upright and stable position.

2. Make sure that the condensate can drain

off properly.

3. If necessary, record the readings of the

operating hours counter.

NOTICE!Before starting the device for

the first time, after transport and after

prolonged storage, leave the device in its

final position for approx. 15 minutes be-

fore switching it on.

Setting target humidity, switching on

device and running it in continuous

mode

1. Set the hygrostat to the desired target

humidity.

2. Set the device switch to position [I].

ðThe green indicator is lit, indicating

that the compressor is running.

ðThe device starts in continuous

mode and runs until the set target

humidity is reached or the auto-

matic defrost function is triggered

(yellow indicator lit).

In continuous mode, condensate is

automatically pumped off.

ðThe device switches off automatically

as soon as the set target humidity is

reached. The device remains however

in ready mode. If the target humidity is

again exceeded, the device is automat-

ically restarted.

Pumping off condensate (before moving

device to a different location)

üThe device must not be in defrost mode

(yellow indicator must be off).

1. Set the device switch to position [II].

ðThe condensate pump starts to

pump the condensate through the

drain hose into the drain or the on-

site drain / collecting vessel.

2. As soon as there is no condensate left in

the tank, quickly set the switch to posi-

tion[0], to prevent the pump from run-

ning dry.

Switching device off

1. Set the device switch to position [0].

ðThe indicator in the device switch is off

and the device is shut down.

NOTICE!For planned prolonged stand-

stills, pump off the condensate before

shutting down the device.

9 Maintenance and care

WARNING! Risk of injury from inhaling

harmful substances

ÜDepending on the location of operation,

the components of the device may be-

come contaminated with mould or other

hazardous organisms or substances.

ÜWhen using compressed air to clean the

device and/or the filter, work in a well-

ventilated area, preferably outdoors.

ÜDuring cleaning, wear safety goggles

and a breathing mask.

ATTENTION! Risk of damage to property

ÜDetergents can cause damage to sur-

faces. Use only mild detergents.

ÜUse only approved original spare parts.

Cleaning housing and filter

The cleaning intervals for the device depend

on the actual operating conditions. Check

and clean the device regularly.

If the device is used for drying at construc-

tion sites, it must be checked and cleaned

after each use; the air filter must be re-

placed at least once a week.

1. Switch off the device at the device

switch.

2. Disconnect the power plug.

3. Clean the housing with a damp, lint-free

cloth and a mild detergent. The original

gloss can be restored with polish.

4. Remove the filter holder by the recessed

grip.

5. Take the filter from the housing.

For foam filters: Clean the filter thor-

oughly with a mild detergent and water.

Let the filter dry.

6. Check the drain fitting and the connected

drain hose for damage. Replace dam-

aged components.

7. Insert the new or cleaned filter in the fil-

ter holder.

8. Mount the filter holder together with the

filter in the same way as it was installed

at the factory.

Cleaning evaporator

üThe evaporator must be de-iced and

dry.

1. Switch off the device at the device switch

and disconnect the power plug.

2. Remove the housing cover and place it

on the ground.

3. Clean the cooling coils from both sides

with compressed air.

To remove greasy dirt from the cooling coils,

proceed as follows:

1. Clean the condensate tray under the

cooling coils as well as the drain hose.

2. Spray the cooling coils with a mild deter-

gent solution, using a spray bottle.

3. Let the cleaned components dry.

4. Mount the covers in the same way as

they were installed at the factory.

ðYou have now cleaned the evaporator.

Cleaning pump sump

Depending on the way the device is used,

deposits may form in the pump sump. To

clean the pump sump, proceed as follows:

1. Switch off the device at the device switch

and disconnect the power plug.

2. Remove the housing cover and place it

on the ground.

Illustration3: Removing condensate tank

1 Condensate

tray

2 Securing

screws of

condensate

pump

3 Housing 4 Condensate

pump

5 Fixture of

condensate

pump

3. Disconnect the condensate hose from

the condensate pump.

4. Loosen the two securing screws of the

condensate pump and slide the pump to

the side to remove it from the device.

The connecting cable is sufficiently long

to remain attached to the device.

5. Clean the condensate pump with a damp

cloth and a mild detergent.

6. Replace the condensate pump in the

device. Secure the condensate pump

and push the condensate hose into the

pump.

Spare parts and customer service

If you have any queries regarding the

device, or wish to order spare parts, contact

your dealer or HEYLO.

Indice

Altri manuali HSC Deumidificatore

HSC

HSC DH 26 Manuale

Manuali Deumidificatore popolari di altre marche

Daitsu

Daitsu CD031IU-DFA Manuale utente

Fehom

Fehom PDGT701BE Manuale utente

Hitachi

Hitachi RD-190GX Manuale utente

Westpoint

Westpoint MDF1-30AE Manuale utente

SOLIS

SOLIS easy dry compact Manuale utente

ENVIROBOSS

ENVIROBOSS EB240 Manuale utente

Sinclair

Sinclair R-9112 Manuale utente

Kenmore

Kenmore 580.54701 Manuale utente

Demargo

Demargo DM828NF Manuale utente

Altrad Lescha

Altrad Lescha LDH 600 Manuale utente

BOMANN

BOMANN LE 1150 CB Manuale utente

SPT

SPT SD-46 Manuale utente

REMKO

REMKO SLN 40 Manuale utente

Haier

Haier HD458 Manuale utente

Logik

Logik L20DHW12 Manuale utente

Frigidaire

Frigidaire FDR30S1 - 30 Pint Capacity Dehumidifier Guida rapida

Blitz

Blitz HHD Series Manuale utente

Prem-I-Air

Prem-I-Air PD14DEN Manuale utente