HTC U Series Manuale utente
User guide
HTC U Phone
HTC Confidential 20170418
For Certification Only
Unboxing and setup
HTC U Phone overview
After taking HTC U Phone out of the box, familiarize yourself first with the location of the card tray
and the different button controls.
1. POWER
2. VOLUME buttons
3. Microphones
4. Front camera
5. Proximity sensor
6. Notification LED
7. nano SIM and storage card tray
8. xxx area
9. BACK
10. USB Type-C ™ connector
11. HOME / Fingerprint scanner
12. RECENT APPS
13. HTC BoomSound Hi-Fi edition speakers
You need a 4G/LTE™plan to use your operator's 4G/LTE network for voice calls and data
services. Check with your operator for details.
§If you want to use a case or screen protector, don’t cover and block the proximity sensor.
Purchase a case or screen protector designed for HTC U Phone.
§Don’t disassemble any part of the phone. Don’t try to open the phone or remove the battery by
force. This may damage the phone or its electronics and will invalidate the warranty.
17 Unboxing and setup
HTC Confidential 20170418
For Certification Only
Back panel
1. Microphone
2. Main camera with BSI, OIS, and
dual PDAF
3. Dual LED flash
§BSI stands for Back Side Illumination.
§OIS stands for Optical Image Stabilization.
§PDAF stands for Phase Detection AutoFocus.
Card tray
When inserting the eject tool into the tray eject hole to remove the card tray, make sure not to press
on the tray to avoid damaging the eject mechanism inside the slot.
Also, if you want to use a protective case, make sure to buy a case that's designed for HTC U Phone
and that doesn't block the tray.
18 Unboxing and setup
HTC Confidential 20170418
For Certification Only
nano SIM card
On HTC U Phone, use a standard nano SIM card. Inserting a modified card that is thicker than the
standard nano SIM card may cause the card to not fit properly or damage the card slot.
Inserting the nano SIM card
1. Hold the phone face up.
2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—
into the tray eject hole.
3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
19 Unboxing and setup
HTC Confidential 20170418
For Certification Only
4. Do the following to place your nano SIM card into the tray:
§Single SIM model: With your nano SIM card's gold contacts facing down, place the card
into the SIM holder of the tray. Make sure to align the cutoff corner to the notch on the
holder.
Place your microSD™card into the SD holder of the tray. See Inserting the microSD
card on page 22.
20 Unboxing and setup
HTC Confidential 20170418
For Certification Only
5. When reinserting the tray, make sure it is facing up so that your cards don't fall out. Hold the
tray with the outer card holder between your fingers, and then steadily slide the tray all the
way into the slot.
6. Press on the cover that's attached to the tray to close it tightly.
Removing the nano SIM card
Make sure to switch off HTC U Phone before removing the card.
1. Hold the phone face up.
2. Insert the tip of the tray eject tool or a small bent paperclip into the tray eject hole.
3. Push the tip all the way into the hole until the card tray ejects.
4. Pull the tray out, and then remove the nano SIM card.
5. To reinsert the tray, center it first in the slot, and then slide it all the way in.
6. Press on the cover that's attached to the tray to close it tightly.
Storage card
Use a storage card to store your photos, videos, and music. When you need to free up phone storage
space, you can also move certain apps to the storage card, if the apps support this feature.
The storage card is optional and sold separately.
21 Unboxing and setup
HTC Confidential 20170418
For Certification Only
Inserting the microSD card
1. Hold the phone face up.
2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—
into the tray eject hole.
3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
4. Place your microSD card—gold contacts facing down and narrow side facing in—into the SD
holder of the tray.
22 Unboxing and setup
HTC Confidential 20170418
For Certification Only
5. When reinserting the tray, make sure it is facing up so that the nano SIM and microSD cards
don’t fall out. Hold the tray with the outer card holder between your fingers, and then
steadily slide the tray all the way into the slot.
6. Press on the cover that's attached to the tray to close it tightly.
If it's the first time you insert a microSD card, you'll be prompted to set it up.
Unmounting the storage card
When you need to remove the storage card while HTC U Phone is on, unmount the storage card first
to prevent corrupting or damaging the files in the storage card.
If your storage card is used as internal storage and there are apps that were moved to the card,
you will not be able to open these apps after unmounting the card.
1. From the Home screen, tap Settings Storage.
2. Do one of the following:
§If your storage card appears under Removable storage, tap next to the card name,
and then tap Eject.
§If your storage card appears under Internal storage, tap the card name, and then tap
Eject.
23 Unboxing and setup
HTC Confidential 20170418
For Certification Only
Removing the microSD card
Make sure to unmount your microSD card before removing it. See Unmounting the storage card
on page 23.
1. Hold the phone face up.
2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—
into the tray eject hole.
3. Push the tip all the way into the hole until the tray ejects.
4. Pull the tray out, and remove the microSD card.
After removing the microSD card, make sure that you insert the empty tray back into the slot.
24 Unboxing and setup
HTC Confidential 20170418
For Certification Only
Charging the battery
Before you turn on and start using HTC U Phone, it is recommended that you charge the battery.
§If the battery has been discharged for several days, you may need to charge HTC U Phone for
several minutes before powering it on.
§Use only the adapter and the USB Type-C cable that came with HTC U Phone to charge the
battery. When the battery power is too low, make sure to use the power adapter to charge, not
the USB cable connection with your computer.
1. Insert the small end of the USB Type-C cable into the USB Type-C connector.
2. Insert the other end of the USB Type-C cable into the power adapter.
3. Plug in the power adapter to an electrical outlet to start charging the battery.
§As a safety precaution, the battery may stop charging to avoid overheating.
§Avoid charging the battery in hot environments.
§When you're using the web browser and charging the battery, HTC U Phone may become
warmer. This is normal.
§To conserve energy, unplug the power adapter from the electrical outlet after you finish
charging.
Switching the power on or off
Switching the power on
Press the POWER button until HTC U Phone vibrates.
When you turn on HTC U Phone for the first time, you’ll need to set it up.
Switching the power off
1. If the display is off, press the POWER button to turn it back on.
2. Press and hold the POWER button for a few seconds.
3. Tap Power off on the options menu.
25 Unboxing and setup
HTC Confidential 20170418
For Certification Only
Indice
Altri manuali HTC Telefono cellulare
HTC
HTC Touch Viva OPAL100 Manuale utente
HTC
HTC 10 evo Manuale utente
HTC
HTC Freestyle Manuale utente
HTC
HTC HTC Legend Istruzioni per il montaggio
HTC
HTC PH85110 Manuale utente
HTC
HTC HTC One Manuale utente
HTC
HTC HTC Wildfire S Manuale utente
HTC
HTC ARIA Manuale utente
HTC
HTC One M9 Manuale utente
HTC
HTC HTC Sensation 4G Manuale utente
HTC
HTC Desire 830 dual sim Manuale utente
HTC
HTC P6500 Manuale utente
HTC
HTC S710D Manuale utente
HTC
HTC ARIA Manuale utente
HTC
HTC J BATTERFLY HTV31 Guida all'installazione
HTC
HTC S740 Manuale utente
HTC
HTC Tornado Manuale utente
HTC
HTC 10 HTV32 Guida all'installazione
HTC
HTC PG06100 Manuale utente
HTC
HTC HTC One X Manuale utente
