Huawei OptiXstar EG8010Hv6 Manuale utente
Huawei OptiXstar EG8010Hv6
Quick Start for QR code
Issue 01
Date 2020-11-12
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every eort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: https://www.huawei.com
Email: [email protected]
Issue 01 (2020-11-12) Copyright © Huawei Technologies Co., Ltd. i
Contents
1 Placing the Device................................................................................................................... 1
2 Connecting Cables................................................................................................................... 3
3 Indicator Description.............................................................................................................. 5
4 Technical Specications......................................................................................................... 7
5 FAQs............................................................................................................................................ 8
Huawei OptiXstar EG8010Hv6
Quick Start for QR code Contents
Issue 01 (2020-11-12) Copyright © Huawei Technologies Co., Ltd. ii
1 Placing the Device
NO TE
● Do not install the ONT outdoors or in an outdoor cabinet.
● The ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in
other modes, such as ceiling.
● Keep 10 cm clearance on all sides to ensure adequate ventilation.
● It is recommended that the computer and ONT be put far away from electric appliances
that generate strong magnetic or electric elds, such as microwave ovens.
Mounting an ONT on the Desk
The gure below shows an ONT that is horizontally placed on a desk.
Huawei OptiXstar EG8010Hv6
Quick Start for QR code 1 Placing the Device
Issue 01 (2020-11-12) Copyright © Huawei Technologies Co., Ltd. 1
NO TE
The appearance shown in this document may be dierent from the actual appearance of
the product. The actual product prevails.
Mounting an ONT onto a Wall
1. Mark two positions with the same spacing as that between the two mounting
holes of the ONT using a marker on a wall.
2. Select a proper drill bit according to the outer diameter of the screws. Use a
hammer drill to drill the marked positions on the wall. Then clean the holes
and install two expansion bolts.
3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 3
mm ends out of the wall, and mount the ONT onto the screws.
NO TE
It is recommended that the screw be about 4 mm in diameter and longer than 20 mm. The
screw head should be between 6mm and 9mm in diameter.
Huawei OptiXstar EG8010Hv6
Quick Start for QR code 1 Placing the Device
Issue 01 (2020-11-12) Copyright © Huawei Technologies Co., Ltd. 2
2 Connecting Cables
Huawei OptiXstar EG8010Hv6
Quick Start for QR code 2 Connecting Cables
Issue 01 (2020-11-12) Copyright © Huawei Technologies Co., Ltd. 3
NO TE
● The ber connector connected to the optical port on the wall varies depending on
actual conditions.
● To ensure normal use of bers, make sure that the ber bending radius is larger than 30
mm.
No. Item Description
1 ON/OFF Powers the ONT on or o.
2 POWER Connects to a power adapter.
3 LAN Connects to PCs or IP set-top boxes (STBs).
4 OPTICAL The optical port is equipped with a rubber plug and
connected to a ber for upstream transmission.
The type of the optical connector connected to the
optical port can be SC/APC.
Huawei OptiXstar EG8010Hv6
Quick Start for QR code 2 Connecting Cables
Issue 01 (2020-11-12) Copyright © Huawei Technologies Co., Ltd. 4
3 Indicator Description
Indicator Status Description
POWER Steady on The ONT is powered on.
O The power supply is cut o.
PON/LOS See the following table.
LAN Steady on The Ethernet connection is in the normal
state.
Blinking Data is being transmitted over the
Ethernet port.
O The Ethernet connection is not set up.
Status No. PON Status LOS Status Description
1O O The ONT is prohibited by the
upper-layer device or blinks
abnormally. Contact the
service provider for help.
2 Blinks twice a
second
Blinks twice a
second
3 Blinks twice a
second
O The ONT attempts to set up
a connection with its upper-
layer device.
4 Steady on O A connection is set up
between the ONT and its
upper-layer device.
Huawei OptiXstar EG8010Hv6
Quick Start for QR code 3 Indicator Description
Issue 01 (2020-11-12) Copyright © Huawei Technologies Co., Ltd. 5
Status No. PON Status LOS Status Description
5O Blinks once
every 2
seconds
The ONT is not connected to
bers or does not receive
optical signals.
6 Blinks once
every 2
seconds
Blinks once
every 2
seconds
The hardware is faulty.
NO TE
If the ONT is not powered on or the power switch is turned o, all indicators are o.
Huawei OptiXstar EG8010Hv6
Quick Start for QR code 3 Indicator Description
Issue 01 (2020-11-12) Copyright © Huawei Technologies Co., Ltd. 6
4 Technical Specications
Product Function
Huawei OptiXstar
EG8010Hv6
1 Ethernet port
● Power adapter input: See the nameplate on the adapter.
● System power supply: See the nameplate on the device.
● Ambient temperature: 0ºC to +40ºC
● Ambient humidity: 5%–95% (non-condensing)
● Dimensions (H x W x D): 26 mm x 69 mm x 83 mm
● Weight: About 72g
● Maximum system power consumption: 2.5 W
Huawei OptiXstar EG8010Hv6
Quick Start for QR code 4 Technical Specications
Issue 01 (2020-11-12) Copyright © Huawei Technologies Co., Ltd. 7
Indice
Altri manuali Huawei Hardware per computer
Huawei
Huawei NetCol8000-A Series Manuale utente
Huawei
Huawei eMDC610 Specifiche tecniche
Huawei
Huawei MU609 Manuale utente
Huawei
Huawei HiLink E303S-1 Manuale utente
Huawei
Huawei RT-AR 46-ERPU-1024M Manuale utente
Huawei
Huawei EM820W Manuale utente
Huawei
Huawei Telecom Power TP48200A-DT19C2 Manuale utente
Huawei
Huawei NetCol8000-A Series Manuale utente
Huawei
Huawei 203HW Manuale utente
Huawei
Huawei MU709s-2 Istruzioni per l'installazione
Huawei
Huawei RMS-RELAY02B Manuale utente
Huawei
Huawei CR-MPUB Manuale utente
Huawei
Huawei RRU3908 AC V1 Manuale utente
Huawei
Huawei Mobile Broadband Manuale utente
Huawei
Huawei UPS5000-H-200K-NTJ Manuale utente
Huawei
Huawei FusionCol8000-C210 Manuale utente
Huawei
Huawei RMS-SNMP01B Manuale utente
Huawei
Huawei CR-MPUB Manuale utente
Huawei
Huawei NetCol5000-A050 Manuale utente
Huawei
Huawei ME906E Istruzioni per l'installazione
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
