Huawei HG659 Manuale utente
Huawei HG659
Home Router for NBN™HFC
Quick Setup Guide
HeadlineHeadline
1. Setup for NBN™HFC Broadband (Cable) 2. Powering On Your Modem
Switch your modem on using the power button located on
the side. By default, your broadband settings should configure
automatically once your NBN™ service is active and your
modem is powered on for 15 minutes.
1. The Internet light on the front of your modem should be
solid green.
2. The VoIP light on the front of your modem should be solid
green if you have an active VoIP phone service and a handset
connected to the modem. See section 4 of this guide for
more details.
Please wait for a confirmation email
from us that your NBN™ HFC service is
active before getting started.
1. Connect the Power port on the back
of your modem to your power socket.
2. Using the Ethernet cable supplied,
connect the blue WAN port on the
back of the modem to the UNI-D1
port on your NBN™ Connection Box
(note that some boxes may have one
yellow LAN port to plug into instead).
3. If you wish to use your VoIP phone
service, connect your phone handset
to the Phone1 port on the back of
your modem.
4. Using an additional Ethernet cable,
you can connect your computer
to any of the 4 LAN ports on the
back of your modem. Alternatively,
follow the steps later in this guide
to connect WiFi devices such as
computers, tablets and smartphones.
NBN Connection Box
Power Socket
NBN™ HFC Gateway
Telephone
Wall Outlet
PC
1 3 4 2
1 2
If the internet light is off
Check if you received an email from us advising that your
service is ACTIVE.
- If you have, please check section 6 of this guide to configure
the settings manually.
- If you haven’t received the email, your NBN™ connection
is not ACTIVE yet. Please check your last email from us for
advice on your connection appointment. It will include a
reference number in case you need to call with any concerns.
Headline
4. VoIP Phone Setup
Your modem’s WiFi has been pre-configured.
You’ll find the WiFi network name (SSID) and
password (WLAN Key) printed on a sticker on
the back of your modem.
1. Make sure that WiFi is enabled on your computer, tablet,
smartphone or other WiFi device.
2. View the list of available WiFi networks on your WiFi device
and select the network called WiFi-XXXX (XXXX will be 4
random alphanumeric characters).
3. Enter the WiFi password (security key) exactly as printed on
the sticker on the back of your modem.
Note: You may notice there are two WiFi networks present.
You may connect to either of these, however most devices
will only be compatible with the 2.4GHz network. See the
sticker on your modem for more network details.
3. WiFi (Wireless) Setup
By default, your VoIP phone service should
set up automatically once your NBN™ and
VoIP services are active and your modem is
online.
All you have to do is plug a handset into the Phone1 port on
the back of your modem.
If you can’t use your VoIP phone service after setting up,
please use the contact details in section 8 of this guide to
call our Support Team for assistance.
Porting your existing phone number to VoIP?
If you’ve asked us to convert your existing phone number
to a VoIP service, please allow up to 7 days after your NBN™
service is active for this porting process to complete. We’ll
send you an email to confirm when your VoIP service is
active and ready to use.
Headline Headline
SUPPORT INFORMATION
5. Modem Indicator Lights
The following table lists how the indicator lights on the front of your modem may appear
and what they mean.
Indicator Light Description Light Description
Power Steady green Your modem is powered on
WAN Steady green Your modem is connected to NBN™
Blinking green Your modem is connecting to NBN™
Internet
Off Your modem is not connected to the Internet
Steady green Your modem is connected to the Internet. No data is being transmitted
Blinking green Your modem is connected to the Internet. Data is being transmitted
WLAN Steady green Your modem has wireless enabled
Blinking green Your modem has wireless enabled. Data is being transmitted wirelessly
VoIP Steady green Your VoIP phone service is ready
Blinking green Your VoIP phone service is in use
LAN1~LAN4 Steady green The LAN port has device plugged in and turned on
Power WAN Internet WLAN VoIP LAN1 LAN2 LAN3 LAN4 USB
6. Manual setup
1. On a computer or WiFi device that’s connected to your modem, open your web browser and go to http://192.168.1.1
2. Log in with the default username and password, which are both admin. The Start Wizard should open. If it doesn’t, select
Home > Start Wizard.
3. Select Connect with user account and enter your credentials as provided in the email advising that your NBN™ HFC service is
active.
iiNet Westnet Internode
Password recovery iinet.net.au/password westnet.com.au/password internode.on.net/getmypassword
4. Click Next. After connecting successfully, you may wish to customize your WiFi network by following the steps in the next
section of this guide.
5. If following these manual setup instructions doesn’t get you online, please use the details in section 8 of this guide to call
our Support Team for assistance.
1. After logging into the modem settings (see steps 1-2 on
previous page) you can customize your WiFi network details as
part of the Start Wizard, or by selecting Home Network > WLAN
Settings.
2. Your modem has 2 WiFi networks which share the same
password but broadcast on different frequencies. If your
device(s) can’t connect to the latest 5GHz network, use the
2.4GHz one.
3. The 2.4/5GHz SSIDs are the names of your WiFi networks. You
can change these to anything you’d like so they’re easier to spot
in a list of WiFi networks to join.
4. If you’re in the Home Network settings (not the Start Wizard)
make sure Security mode is set to WPA-PSK+WPA2-PSK with
TKIP+AES WPA encryption.
5. The password/WPA pre-shared key/WLAN Key is the password
for your WiFi networks. Change this to something that’s hard
for others to guess but easy for you to remember. Make sure
you write down your newWiFi details, otherwise you may
need to factory reset your modem if you forget them.
6. Click Save. After changing your WiFi details, you may need to
reconnect your WiFi device(s) using the new name/password.
7. WiFi Customisation 8. Contact Support
iiNet Westnet Internode
13 22 58 1300 786 068 1300 788 233
iinet.net.au/support westnet.com.au/myhelp internode.on.net/support
Available 24/7
For operating hours during public
holidays visit iinet.net.au/contact
Available 24/7
For operating hours during public
holidays visit westnet.com.au/contact
Mon-Sun 7AM-Midnight (ACST)
For operating hours during public
holidays visit internode.on.net/contact
Account management
toolbox3.iinet.net.au
Account management
myaccount3.westnet.com.au
Account management
internode.on.net/myinternode
NotesNotes
Altri manuali per HG659
8
Indice
Altri manuali Huawei Router di rete
Huawei
Huawei B535-333 Manuale utente
Huawei
Huawei B315 LTE CPE Manuale utente
Huawei
Huawei S3026C-PWR Manuale utente
Huawei
Huawei AR500 Manuale del proprietario
Huawei
Huawei AR530 Series Manuale utente
Huawei
Huawei WS7200 Manuale utente
Huawei
Huawei B311s-220 Manuale utente
Huawei
Huawei E5785-320a Manuale utente
Huawei
Huawei SmartAX MT800 Manuale utente
Huawei
Huawei NE05E Manuale utente
Huawei
Huawei AR3200 Series Manuale utente
Huawei
Huawei Quidway NetEngine40E Guida
Huawei
Huawei SmartAX MT800 Manuale utente
Huawei
Huawei B593 Manuale utente
Huawei
Huawei AR1200 Series Manuale utente
Huawei
Huawei SUN2000-25KTL-M5 Manuale utente
Huawei
Huawei 31010GAS Manuale utente
Huawei
Huawei EchoLife HG8245 Manuale utente
Huawei
Huawei OptiXstar HG8140H5 Manuale utente
Huawei
Huawei LTE CPE B593 Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza