Huawei SUN2000-250KTL Series Manuale utente

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL)

Series

User Manual

Issue 02

Date 2022-12-20

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: https://e.huawei.com

About This Document

Purpose

This document describes the installation, commissioning, maintenance, and

troubleshooting of the SUN2000-250KTL-H1, SUN2000-250KTL-H3,

SUN2000-280KTL-H0, SUN2000-300KTL-H0, SUN2000-330KTL-H1, and

SUN2000-330KTL-H2 (also referred to as SUN2000). Before installing and

operating the SUN2000, ensure that you are familiar with the features, functions,

and safety precautions provided in this document.

Figures provided in this document are for reference only.

Intended Audience

This document is intended for photovoltaic (PV) plant operating personnel and

qualied electricians.

Symbol Conventions

The symbols that may be found in this document are dened as follows.

Symbol Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if

not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to

personal injury.

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series

User Manual About This Document

Symbol Description

Supplements the important information in the main text.

NOTE is used to address information not related to

personal injury, equipment damage, and environment

deterioration.

Change History

Changes between document issues are cumulative. The latest document issue

contains all the changes in previous issues.

Issue 02 (2022-12-20)

Added the SUN2000-250KTL-H1, SUN2000-250KTL-H3, SUN2000-330KTL-H1, and

SUN2000-330KTL-H2 models.

Updated 2.1 Product Models.

Updated 4.3 Determining the Installation Position.

Updated 5.2 Preparing Cables.

Updated 7.1.2 Downloading and Installing the App.

Updated 8.5 Troubleshooting.

Updated 10 Technical Specications.

Updated B Grid Codes.

Updated D Contact Information.

Issue 01 (2022-10-09)

This issue is used for rst oce application (FOA).

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series

User Manual About This Document

Contents

About This Document................................................................................................................ ii

1 Safety Information.................................................................................................................. 1

1.1 Personal Safety.........................................................................................................................................................................2

1.2 Electrical Safety........................................................................................................................................................................4

1.3 Environment Requirements................................................................................................................................................. 7

1.4 Mechanical Safety................................................................................................................................................................... 8

2 Overview................................................................................................................................. 13

2.1 Product Models......................................................................................................................................................................13

2.2 Product Introduction............................................................................................................................................................ 14

2.3 Enclosure Labels.................................................................................................................................................................... 15

2.4 Component Description...................................................................................................................................................... 17

2.4.1 Product Appearance......................................................................................................................................................... 17

2.4.2 Indicator Status.................................................................................................................................................................. 19

2.5 Working Principles................................................................................................................................................................ 21

2.5.1 Circuit Diagram.................................................................................................................................................................. 21

2.5.2 Working Modes.................................................................................................................................................................. 21

3 Storage.....................................................................................................................................23

4 Installation..............................................................................................................................25

4.1 Checking Before Installation............................................................................................................................................. 25

4.2 Preparing Tools...................................................................................................................................................................... 25

4.3 Determining the Installation Position............................................................................................................................28

4.4 Installing the Mounting Bracket...................................................................................................................................... 33

4.5 Installing the SUN2000....................................................................................................................................................... 34

5 Installing Cables.................................................................................................................... 36

5.1 Precautions.............................................................................................................................................................................. 36

5.2 Preparing Cables................................................................................................................................................................... 37

5.3 Crimping an OT or DT Terminal...................................................................................................................................... 43

5.4 Installing PE Cables and AC Power Cables...................................................................................................................46

5.5 Installing DC Power Cables............................................................................................................................................... 52

5.6 Installing Communications Cables.................................................................................................................................. 56

6 Power-On Commissioning................................................................................................... 59

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series

User Manual Contents

6.1 Check Before Power-On......................................................................................................................................................59

6.2 System Power-On................................................................................................................................................................. 60

7 Man-Machine Interactions.................................................................................................. 62

7.1 Operations with the App.................................................................................................................................................... 62

7.1.1 App Introduction................................................................................................................................................................ 62

7.1.2 Downloading and Installing the App..........................................................................................................................63

7.1.3 Logging In to the App...................................................................................................................................................... 64

7.2 Upgrading the SUN2000 Using a USB Flash Drive................................................................................................... 67

8 System Maintenance............................................................................................................ 69

8.1 Shutdown and Power-O.................................................................................................................................................. 69

8.2 Power-O for Maintenance.............................................................................................................................................. 69

8.3 Routine Maintenance.......................................................................................................................................................... 71

8.4 Replacing a Fan..................................................................................................................................................................... 73

8.5 Troubleshooting..................................................................................................................................................................... 76

8.6 Resetting and Turning On the DC SWITCH................................................................................................................. 86

9 Handling the Inverter...........................................................................................................87

9.1 Removing the SUN2000..................................................................................................................................................... 87

9.2 Packing the SUN2000..........................................................................................................................................................87

9.3 Disposing of the SUN2000................................................................................................................................................ 87

10 Technical Specications.....................................................................................................88

A Domain Name List of Management Systems.................................................................93

B Grid Codes...............................................................................................................................94

C Resetting Password............................................................................................................ 102

D Contact Information.......................................................................................................... 103

E Acronyms and Abbreviations............................................................................................105

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series

User Manual Contents

1 Safety Information

Statement

Before transporting, storing, installing, operating, using, and/or maintaining the

equipment, read this document, strictly follow the instructions provided herein,

and follow all the safety instructions on the equipment and in this document. In

this document, "equipment" refers to the products, software, components, spare

parts, and/or services related to this document; "the Company" refers to the

manufacturer (producer), seller, and/or service provider of the equipment; "you"

refers to the entity that transports, stores, installs, operates, uses, and/or

maintains the equipment.

The Danger, Warning, Caution, and Notice statements described in this

document do not cover all the safety precautions. You also need to comply with

relevant international, national, or regional standards and industry practices. The

Company shall not be liable for any consequences that may arise due to

violations of safety requirements or safety standards concerning the design,

production, and usage of the equipment.

The equipment should be used in an environment that meets the design

specications. Otherwise, the equipment may be faulty, malfunctioning, or

damaged, which is not covered under the warranty. The Company shall not be

liable for any property loss, personal injury, or even death caused thereby.

Comply with applicable laws, regulations, standards, and specications during

transportation, storage, installation, operation, use, and maintenance.

Do not perform reverse engineering, decompilation, disassembly, adaptation,

implantation, or other derivative operations on the equipment software. Do not

study the internal implementation logic of the equipment, obtain the source code

of the equipment software, violate intellectual property rights, or disclose any of

the performance test results of the equipment software.

The Company shall not be liable for any of the following circumstances or

their consequences:

● The equipment is damaged due to force majeure such as earthquakes, oods,

volcanic eruptions, debris ows, lightning strikes, res, wars, armed conicts,

typhoons, hurricanes, tornadoes, and other extreme weather conditions.

● The equipment is operated beyond the conditions specied in this document.

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series

User Manual 1 Safety Information

● The equipment is installed or used in environments that do not comply with

international, national, or regional standards.

● You fail to follow the operation instructions and safety precautions on the

product and in the document.

● You remove or modify the product or modify the software code without

authorization.

● You or a third party authorized by you cause the equipment damage during

transportation.

● The equipment is damaged due to storage conditions that do not meet the

requirements specied in the product document.

● You fail to prepare materials and tools that comply with local laws,

regulations, and related standards.

● The equipment is damaged due to your or a third party's negligence,

intentional breach, gross negligence, or improper operations, or other reasons

not related to the Company.

1.1 Personal Safety

D ANGER

Ensure that power is o during installation. Do not install or remove a cable with

power on. Transient contact between the core of the cable and the conductor will

generate electric arcs or sparks, which may cause a re or personal injury.

D ANGER

Non-standard and improper operations on the energized equipment may cause

re, electric shocks, or explosion, resulting in property damage, personal injury, or

even death.

D ANGER

Before operations, remove conductive objects such as watches, bracelets, bangles,

rings, and necklaces to prevent electric shocks.

D ANGER

During operations, use dedicated insulated tools to prevent electric shocks or short

circuits. The dielectric withstanding voltage level must comply with local laws,

regulations, standards, and specications.

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series

User Manual 1 Safety Information

WARNING

During operations, wear personal protective equipment such as protective

clothing, insulated shoes, goggles, safety helmets, and insulated gloves.

Figure 1-1 Personal protective equipment

General Requirements

● Do not stop protective devices. Pay attention to the warnings, cautions, and

related precautionary measures in this document and on the equipment.

● If there is a likelihood of personal injury or equipment damage during

operations, immediately stop, report the case to the supervisor, and take

feasible protective measures.

● Do not power on the equipment before it is installed or conrmed by

professionals.

● Do not touch the power supply equipment directly or with conductors such as

damp objects. Before touching any conductor surface or terminal, measure

the voltage at the contact point to ensure that there is no risk of electric

shock.

● Do not touch operating equipment because the enclosure is hot.

● Do not touch a running fan with your hands, components, screws, tools, or

boards. Otherwise, personal injury or equipment damage may occur.

● In the case of a re, immediately leave the building or the equipment area

and activate the re alarm or call emergency services. Do not enter the

aected building or equipment area under any circumstances.

Personnel Requirements

● Only professionals and trained personnel are allowed to operate the

equipment.

– Professionals: personnel who are familiar with the working principles and

structure of the equipment, trained or experienced in equipment

operations and are clear of the sources and degree of various potential

hazards in equipment installation, operation, maintenance

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series

User Manual 1 Safety Information

– Trained personnel: personnel who are trained in technology and safety,

have required experience, are aware of possible hazards on themselves in

certain operations, and are able to take protective measures to minimize

the hazards on themselves and other people

● Personnel who plan to install or maintain the equipment must receive

adequate training, be able to correctly perform all operations, and understand

all necessary safety precautions and local relevant standards.

● Only qualied professionals or trained personnel are allowed to install,

operate, and maintain the equipment.

● Only qualied professionals are allowed to remove safety facilities and inspect

the equipment.

● Personnel who will perform special tasks such as electrical operations,

working at heights, and operations of special equipment should possess the

required local qualications.

● Only authorized professionals are allowed to replace the equipment or

components (including software).

● Only personnel who need to work on the equipment are allowed to access

the equipment.

1.2 Electrical Safety

D ANGER

Before connecting cables, ensure that the equipment is intact. Otherwise, electric

shocks or re may occur.

D ANGER

Non-standard and improper operations may result in re or electric shocks.

D ANGER

Prevent foreign matter from entering the equipment during operations. Otherwise,

equipment damage, load power derating, power failure, or personal injury may

occur.

WARNING

For the equipment that needs to be grounded, install the ground cable rst when

installing the equipment and remove the ground cable last when removing the

equipment.

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series

User Manual 1 Safety Information

Altri manuali per SUN2000-250KTL Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Huawei UPS

Huawei

Huawei UPS5000-A-H Series Manuale utente

Huawei

Huawei UPS5000-A-30 kVA Manuale utente

Huawei

Huawei Telecom Power TP48200A-DX12A1 Manuale utente

Huawei

Huawei SmartLi Series Manuale utente

Huawei

Huawei UPS5000 Manuale utente

Huawei

Huawei UPS5000-S-600 Manuale utente

Huawei

Huawei UPS5000-S200K-SM Manuale utente

Huawei

Huawei iBAT 2.0-CIM01C2 Manuale utente

Huawei

Huawei UPS2000-G-3 kVA Manuale utente

Huawei

Huawei UPS5000-H-1200 kVA Manuale utente

Huawei

Huawei UPS5000-E Series Manuale utente

Huawei

Huawei UPS5000-H-800 Manuale utente

Huawei

Huawei SmartLi 2.0 Manuale utente

Huawei

Huawei UPS5000-H-1200K-NT Manuale utente

Huawei

Huawei UPS5000-E-40 kVA Manuale utente

Huawei

Huawei SmartLi 2.0 Manuale utente

Huawei

Huawei UPS5000-A-30 kVA Manuale utente

Huawei

Huawei UPS5000-E-400K-SM Manuale utente

Huawei

Huawei UPS5000-A-300K-STT Manuale utente

Huawei

Huawei UPS2000-A-6 kVA Manuale utente

Huawei

Huawei UPS5000-S Series Manuale utente

Huawei

Huawei UPS5000-S-1200 kVA Manuale utente

Huawei

Huawei UPS5000 Manuale utente

Huawei

Huawei UPS5000-S Series Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente