Huawei Band 4e Manuale utente

Contents

Getting started

Charging your band 1

Wearing your band 2

Pairing the band with your phone 2

Icons 3

Powering on/o and restarting the band 6

Gestures 7

Wearing mode 7

Restoring factory settings 8

Workout monitoring

Running form monitoring 9

Basketball performance tracking 10

Daily activity tracking 12

Dual device connection 13

Convenient life

Incoming calls 14

Rejecting incoming calls 14

Notications 14

Finding your phone using the band 14

Setting an Event alarm 15

Setting a Smart alarm 16

Health management

Activity reminders 18

Sleep tracking 18

More guidance

Viewing the Bluetooth name and MAC address 20

Updating your device 21

Viewing version information 21

Cleaning and maintenance 21

Water resistance 21

Getting started

Charging your band

Charging

1Push the band body through the strap to remove it.

2Align the main body's metal charging contacts with the charging cradle and insert them

into the charging cradle.

3During charging, the charging icon and battery level will be displayed on the screen, and

the phone will automatically power on. Otherwise, change the charger direction and try

again.

Charge your band in a dry and well-ventilated environment.

Before charging, make sure the charging port is dry. Wipe o any water or sweat stains

to prevent any short-circuiting.

Your band does not come with a charger. Use a Huawei charger with a rated output

voltage of 5 V and a rated output current of 0.5 A or higher, a USB port on your

computer, or a charger that complies with applicable national and regional laws and

regulations as well as international and regional security standards to charge your band.

Other chargers and power banks that do not meet corresponding safety standards may

cause issues such as slow charging and overheating. Exercise caution when using them. It

is recommended that you purchase a Huawei charger from an ocial Huawei retail

channel.

Charging time

It takes about 2 hours to fully charge the band. After the band is fully charged, it will display

a full charge icon.

Viewing the battery level

•View the battery level on the band's watch face when the band screen is on.

•Alternatively, open the Huawei Health app on the connected phone and touch Devices

then your device name to check the battery level of your band.

Low battery alert

When the battery level is lower than 10%, your band will vibrate to notify you of the low

battery level and prompt you to charge your band as soon as possible.

Wearing your band

1Attach and x the body into the strap as shown in the following gure.

2The strap is made of exible materials. Adjust it before putting it on. If you need to adjust

the strap again after putting it on, put your middle nger between the layers of the strap,

then use your thumb and index nger to slide the buckle.

•Your band is made of materials that are safe to use. If you experience skin discomfort

when wearing the band, stop using it and consult a doctor.

•Be sure to wear your band properly to maximise comfort.

•Keep the band and your skin dry and clean to prevent any damages caused by

moisture.

Pairing the band with your phone

Connect your band to the charging cradle to activate your band when using it for the rst

time. The band is ready to be paired via Bluetooth by default.

Instead of pairing your band with the phone via Bluetooth directly, pair your band with the

phone using the Huawei Health app. Otherwise, your phone will not display the correct time

and step count.

•For Android users:

1Download the latest version of the Huawei Health app.

2Open the Huawei Health app, go to Devices > > ADD > Smart bands, and select

your band's name.

3Touch PAIR and the app will automatically search for available devices. Once your band

is found, touch its name to start pairing.

4Your band will vibrate when it receives a pairing request. Tap the touch key on your

band to start pairing.

•For iOS users:

1Download the latest version of the Huawei Health app.

2Open the Huawei Health app, go to Devices > > ADD > Smart bands, and select

your band's name.

3Touch PAIR and the app will automatically search for available devices. Once your band

is found, touch its name to start pairing.

4Your band will vibrate when it receives a pairing request. Tap the touch key on your

band to start pairing.

Getting started

•Your band will display an icon on the screen to inform you that the pairing is

successful. It will then receive information (such as the date and time) from your

phone.

•Otherwise, your band screen will display an icon to inform you that pairing was

unsuccessful. It will then return to the startup screen.

Icons

The icons may vary depending on the band version. The following information is for

reference only.

Wrist mode:

Time Steps Distance

Calories Sleep time Find phone

Getting started

Switch to Foot mode Incoming calls Mute incoming calls

Alarm Dismiss the alarm Hours active

moderate to high intensity Goal reached Message reminders

More Restart Power o

Device name - -

The "Find phone" icon will not be displayed when your band is not connected to your

phone.

Foot mode:

Getting started

Running Switch to Wrist mode Individual workout distance

Individual workout time App connected running Basketball

Cycling monitoring (only

supported with the HUAWEI

Band 4e Active)

- -

Connection and pairing:

Bluetooth to be connected Bluetooth connection failure Bluetooth connected

Connect to Bluetooth - -

Battery:

Getting started

Charging Low battery -

Others:

System update - -

Powering on/o and restarting the band

Powering on the band

Your band will automatically power on if you charge it.

Powering o the band

•Your band will automatically power o if the battery is empty.

•In Wrist mode, tap the touch key below the screen until the screen is displayed, then

tap and hold the touch key to enter it. Tap the touch key to switch to the screen, then

tap and hold the touch key to power o the band.

Restarting the band

In Wrist mode, tap the touch key below the screen until the screen is displayed, then tap

and hold the touch key to enter it. Tap the touch key to switch to the screen, then tap

and hold the touch key to restart the band.

Getting started

Gestures

Action Function

Touch the touch key Switch between screens

Touch and hold the

touch key

Enable the corresponding feature

Waking the screen

To wake the screen, raise your wrist or rotate it in an inward direction, and the screen will

stay on for 5 seconds.

•Open the Huawei Health app, then enable the Raise wrist to wake screen feature on

the device details screen.

•The screen brightness cannot be adjusted manually.

Switching between screens

To switch between screens, rotate your wrist when the screen is on.

•Open the Huawei Health app, then enable the Rotate to switch screen feature on the

device details screen.

•The Rotate to switch screen feature is not supported in Foot mode.

Turning o the screen

•To turn o the screen, lower your wrist.

•The screen automatically turns o when the band is idle for 5 seconds.

When the screen wakes up within 5 seconds after turning o, it returns to the previous

screen. When the screen wakes up more than 5 seconds after turning o, it switches to

the home screen.

Wearing mode

The band comes with Wrist mode and Foot mode.

•The following features are supported in Wrist mode: daily activity tracking, sleep tracking,

message reminders, incoming call notications, alarm reminders, and nding your phone

using your band.

•The following features are supported in Foot mode: professional running data monitoring

(cadence, stride, ground contact time, foot strike pattern, landing impact, eversion

excursion, and swing angle.), basketball performance tracking (average vertical jump

height, maximum vertical jump height, number of jumps, average hang time, average

moving speed, and maximum moving speed), and cycling monitoring (cadence).

Getting started

Restoring factory settings

Method 1: Restore your band to its factory settings: Knock the time screen two times with

one knuckle and tap the touch key until you nd the Restore screen, then tap and hold the

touch key to restore the band to its factory settings. Once you have restored your band to its

factory settings, all its data will be cleared, so please exercise with caution.

Method 2: Open the Huawei Health app, touch Devices and then touch your device name.

On the device settings screen, touch Restore factory settings.

Getting started

Workout monitoring

Running form monitoring

1Switching to Foot mode

aDownload the Huawei Health app and pair your band with your phone when using the

band for the rst time.

bPinch the buttons on either side of the shoe attachment to open it. Insert the body in

the top of the case, align the metal contacts of the band body with those on the shoe

attachment. Buckle the attachment, then loop your laces through the space behind the

band body and tie it to your shoe.

cThen band will automatically switch to Foot mode and a running startup screen

will be displayed.

1For more accurate results, make sure the device is resting on the top and near the

middle of your laces.

2Please tighten the shoe buckle and note that fastening the shoe buckle around too

many or few laces may cause the shoe buckle to become too loose.

3You can also open the Huawei Health app, touch Devices, touch Wearing mode, and

set Wearing mode to Manual. In Wrist mode, tap the touch key on the band screen

to enter the screen, then tap and hold the touch key to switch to Foot mode.

4The running form monitoring is a feature powered by algorithm that is specially

designed for running in Foot mode and oers seven types of professional running

form data. Wear the device on your shoe when running to get the most ecient and

accurate data.

2Monitoring running form

Method 1: Starting a running session using your band.

The band can record your running data during the workout even when it is not connected

to your phone. You can simply connect your band to the phone using the Huawei Health

app after the running session to sync data between both devices.

aStart running: Tap and hold the touch key on the running startup screen on the

band.

bStop running: Tap and hold the touch key on the band to stop running.

cSync data: Ensure that the band is connected to the phone using the Huawei Health

app for the data to be synced automatically. You can also swipe down on the home

Altri manuali per Band 4e

Indice

Altri manuali Huawei Orologio

Huawei

Huawei FIT Manuale utente

Huawei

Huawei Band 3e Manuale utente

Huawei

Huawei Watch Buds Manuale utente

Huawei

Huawei MNS-B19 Manuale utente

Huawei

Huawei TalkBand Manuale utente

Huawei

Huawei WATCH GT 3 Pro Manuale utente

Huawei

Huawei WATCH GT2 Manuale utente

Huawei

Huawei Watch GT3 46mm Manuale utente

Huawei

Huawei WATCH GT Cyber Manuale utente

Huawei

Huawei WATCH Ultimate Manuale utente

Huawei

Huawei FRG-B19 Manuale utente

Huawei

Huawei FTN-B19 Manuale utente

Huawei

Huawei MIL-B19 Manuale utente

Huawei

Huawei Watch 2 Manuale utente

Huawei

Huawei WATCH FIT mini Manuale utente

Huawei

Huawei YDA-B09S Manuale utente

Huawei

Huawei Watch GT Guida all'installazione

Huawei

Huawei GT 2 Pro Manuale utente

Huawei

Huawei Watch 2 Guida all'installazione

Huawei

Huawei Watch 2 Manuale utente

Huawei

Huawei YDA-B19V Manuale utente

Huawei

Huawei MLY-B10 Manuale utente

Huawei

Huawei SGA-B19 Manuale utente

Huawei

Huawei GT 3 JPT Titanium Manuale utente

Manuali Orologio popolari di altre marche

Pandora

Pandora WATCH2 Manuale utente

Casio

Casio QW-4343 Manuale utente

Suunto

Suunto X6 Manuale utente

Seiko

Seiko N830 Manuale utente

MotionX

MotionX 365 Manuale utente

Garmin

Garmin VENU SQ 2 Manuale utente

QCY

QCY Watch GTC Manuale utente

Canyon

Canyon Cindy CNE-KW41WP Manuale utente

Esq

Esq Watches Guida all'installazione

Crane

Crane AA5-CDSM-3A Manuale utente

Timex

Timex W-214 Manuale utente

DETOMASO

DETOMASO MATERA Manuale utente

Geemarc

Geemarc Watch N Shake Manuale utente

LORUS

LORUS W590 Manuale utente

STENLILLE

STENLILLE Actío Manuale utente

Casio

Casio 5594 Manuale utente

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuale utente

Slazenger

Slazenger SLZ800 Manuale utente