Huawei 5G CPE MAX5 Manuale utente

Quick Start Guide

Pika-aloitusopas

Snabbstartsguide

Hurtigstartguide

Hurtigstartveiledning

Sparčiosios paleisties vadovas

Īsa pamācība

Kiirtutvustus

Schnellstartanleitung

Skrócona instrukcja obsługi

Guida rapida

Ръководство за бърз старт

Snelstartgids

150304-1315

Quick Start Guide................................. 1

Pika-aloitusopas................................... 9

Snabbstartsguide................................. 17

Hurtigstartguide.................................... 25

Hurtigstartveiledning............................. 33

Sparčiosios paleisties vadovas............. 41

Īsa pamācība........................................ 49

Kiirtutvustus.......................................... 57

Schnellanleitung................................... 65

Skrócona instrukcja obsługi.................. 73

Guida rapida......................................... 82

Ръководство за бърз старт................. 90

Snelstartgds.......................................... 98

Contents

Packing List

Safety rope Bracket

Screws (M4*7)

To install the bracket, you’ll need to prepare

the following tools and materials:

Clean towel Glass cleaner A hex key (φ2.5)

The hex key (φ2.5) is included in the CPE package.

To remove the bracket, you’ll need to prepare

the following tools and materials:

Adhesive remover Scraper knife

1. Avoid installing the bracket on any hard to reach

windows, for example, outward opening windows in

high-rise buildings or the outermost sash on sliding

windows.

2. Inward opening windows are recommended. You can

also install the bracket on balcony windows or rst

oor windows, as you can do so by standing outside

the window.

3. Make sure that the window glass is strong enough,

secure, and intact. The glass must not bend, deform,

or crack due to the installed bracket.

4. Make sure that the glass surface is clean and smooth,

and free of any foreign objects. It is recommended

that you avoid installing the bracket on rough, non-

transparent glass. Before the installation, clean the

glass surface thoroughly to remove any oil stains,

water stains, dust, or other foreign objects.

5. Make sure that the position where you install the

bracket is no more than 2 meters from the ground

(such as terrace or other obstacles), and that there are

no people walking around this area.

Selecting the Installation Position

2 3

Installation Guide

It is recommended that you install the bracket in

environments of 15°C and above.

1. Determine the area where you are going to install the

bracket, and clean the area with the glass cleaner.

Wipe the area clean and dry with a towel. Choose a

location near the window’s hinge, and no more than

20 cm away from the lower edge of the window, so

that you can route the network cable through the

window later.

2. Connect the safety rope buckle to the bracket, fasten

the safety rope, and x it along the window sill or on

another immovable object nearby.

3. Remove the liner from the double-sided adhesive tape

on the back of the bracket.

4. Attach the bracket to the area you have cleaned, and

press the bracket from top to bottom hard and evenly

with at least 15 PSI (1 kg/cm2) of pressure for 30

seconds or longer. Check the bubbles from the other

side of the glass, and make sure that the bracket is

fully attached to the glass. Do not remove or touch the

adhesive, as doing so may impair the adhesive force.

If there are a lot of bubbles on the double-sided

adhesive tape, remove and then re-install the bracket.

4 5

5. Keep the bracket still in place for 48 hours. Mount the

four screws into the holes on the bracket, and fasten

the screws using a hex key (φ2.5).

6. Mount the CPE and route the network cable through

the window, by referring to the CPE user manual.

Check the safety rope to make sure that it is secure

and locked. Check the outdoor CPE on a regular

basis for optimal safety.

Removal Guide

1. Heat the bracket with a hair dryer or hot towel for 1 to

2 minutes.

2. Use a scraper knife to slowly pry the bracket from the

glass.

3. Spray adhesive removal (main ingredients: acetone,

ethyl acetate, butyl acetate, and ethanol) onto the

adhesive tape.

6 7

4. Wait for 1 to 2 minutes. Then use the scraper knife to

remove the bracket from the glass.

5. Spray adhesive removal to the glass and the adhesive

on the bracket. Wait for 1 to 2 minutes, and remove

the residue using the scraper knife and towel.

a. Repeat steps 1, 2, and 3 in sequence.

b. Do not exert excessive force when removing the

bracket, as doing so may damage or deform the glass.

Safety information

This section contains important information about the

operation of your device. It also contains information

about how to use the device safely. Read this

information carefully before using your device.

● Extreme heat or cold may damage your device or

accessories.

● Keep the device away from sources of heat and re,

such as a heater, microwave oven, stove, water

heater, radiator, or candle.

● Observe local laws and regulations, and respect the

privacy and legal rights of others.

● Do not drop or cause an impact to the device.

Disposal and recycling information

The symbol on the product, battery, literature,

or packaging means that the products and

batteries should be taken to separate waste

collection points designated by local authori-

ties at the end of the lifespan. This will ensure

that EEE waste is recycled and treated in a

manner that conserves valuable materials and protects

human health and the environment. For more informa-

tion, please contact your local authorities, retailer, or

household waste disposal service or visit the website

https://www.brovi-tech.com.

Reduction of hazardous substances

This device and any electrical accessories are compliant

with local applicable rules on the restriction of the use of

certain hazardous substances in electrical and electronic

equipment, such as EU REACH, RoHS and Batteries

(where included) regulations, etc. For declarations of

conformity about REACH and RoHS, please visit our

web site https://www.brovi-tech.com.

Indice

Lingue:

Altri manuali Huawei Router wireless

Huawei

Huawei 5G Mobile WiFi Pro Manuale utente

Huawei

Huawei N5368X Manuale utente

Huawei

Huawei R216 Specifiche tecniche

Huawei

Huawei WS330 Manuale utente

Huawei

Huawei E5331 Manuale utente

Huawei

Huawei B525 LTE CPE Manuale utente

Huawei

Huawei Mobile WiFi E5878 Manuale utente

Huawei

Huawei ATOM GPS NE08E Manuale utente

Huawei

Huawei WiFi Q2 Manuale utente

Huawei

Huawei B310s-927 Guida all'installazione

Huawei

Huawei E5776 Manuale utente

Huawei

Huawei L01s Manuale utente

Huawei

Huawei E5186 Manuale utente

Huawei

Huawei WS5200 Manuale utente

Huawei

Huawei WS7100 Manuale utente

Huawei

Huawei B593 Guida di riferimento

Huawei

Huawei E5576-320 Manuale utente

Huawei

Huawei Quidway AR-28-30 Manuale utente

Huawei

Huawei NE40E-X1 Guida

Huawei

Huawei Quidway NE40E Manuale di istruzioni

Huawei

Huawei E5730s-2 Specifiche tecniche

Huawei

Huawei E5783B Manuale utente

Huawei

Huawei Speed Wi-Fi NEXT W04 Guida rapida

Huawei

Huawei E5331 Dimensioni

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente