Hubbell KILLARK B7023 Manuale di istruzioni

Page 1 of 3

3940 Dr. Martin Luther King Drive

St. Louis, MO 63113

P/N 00911624 FORM NO. K1061 R12/15 ECO 4-004-15

INSTALLATION, OPERATION &

MAINTENANCE DATA SHEET

MOUNTING PAN HOLE KEY - COMBINATION

ENCLOSURE

NEMA SIZE 3; CATALOG NO. B7023

MOUNTING PAN HOLE KEY - COMBINATION

ENCLOSURE

CAUTION:

Before installing, make sure you are compliant with area classications, failure to do so may result in bodily injury,

death and property damage. Do not attempt installation until you are familiar with the following procedures. All

installation must comply with the applicable Electrical Code.

Make sure that the circuit is de-energized before starting installation or maintenance.

Verify that the installation is grounded. Failure to ground will create electrical shock hazards, which can cause

serious injury and or death.

Technical information, advice and recommendations contained in these documents is based upon information

that Killark believes to be reliable. All the information and advice contained in these documents is intended for

use only by persons having been trained and possessing the requisite skill and know-how and to be used by

such persons only at their own discretion and risk. The nature of these instructions is informative only and does

not cover all of the details, variations or combinations in which this equipment may be used, its storage, delivery,

installation, check out, safe operation and maintenance. Since conditions of use of the product are outside of the

care, custody and control of Killark, the purchaser should determine the suitability of the product for his intended

use, and assumes all risk and liability whatsoever in connection therewith.

Page 2 of 3

3940 Dr. Martin Luther King Drive

St. Louis, MO 63113

P/N 00911624 FORM NO. K1061 R12/15 ECO 4-004-15

* Larger Transformers (250VA Max.) may be installed;

Additional mounting holes (11/64” Dia.) may be

required.

NOTES:

1. Mount Starters, using 1/4-20 thread-forming

screws, as indicated in above chart and as

follows:

TELEMECANIQUE (Qty. 4)

ALL OTHERS (Qty. 3)

2. Mount Circuit Breakers, using 8-32 screws, to

1-3/4” standoffs, in indicated holes.

3. Mount Transformers, using 10-24 x 3/8” thread-

forming screws.

4. Mount Optional Ground Lug in Hole No. 1, using

a 1/4-20 screw. (Order Killark Cat. No. KIT-345.)

5. Optional Control Circuit Fuse Block (Buss

No. 3792) and Terminal Block (Westinghouse

TBABT3) may be installed on pan as space

permits.

CAUTION: Maintain 1/2” (12.7mm) minimum

electrical clearance to all live points.

NOTE: Westinghouse (Cutler-Hammer) W200 Series

Starters are electrically reset and do not use this

manual reset.

3940 Dr. Martin Luther King Drive

St. Louis, MO 63113

P/N 00911624 FORM NO. K1061 R12/15 ECO 4-004-15 Page 3 of 3

TOP OF ENCLOSURE

RESET PLATE HOLE KEY

STARTER ONLY AND COMBINATION SIZE 3

CATALOG NUMBERS B7013 & B7023

Indice

Altri manuali Hubbell Allegato

Hubbell

Hubbell GAI-Tronics 708-001-UL Manuale utente

Hubbell

Hubbell GAI-Tronics 7085-005-UL Manuale utente

Hubbell

Hubbell GAI-Tronics Smart Series Manuale utente

Hubbell

Hubbell GAI-TRONICS 7325-101 Manuale utente

Hubbell

Hubbell GAI-TRONICS 703-002 Manuale utente

Hubbell

Hubbell GAI-Tronics 703-006 Manuale utente

Hubbell

Hubbell HBLSS26WIS Manuale utente

Hubbell

Hubbell Killark B7NFD Series Manuale di istruzioni

Hubbell

Hubbell Killark SJIC Series Manuale di istruzioni

Hubbell

Hubbell Killark USF Series Manuale di istruzioni

Hubbell

Hubbell GAI-TRONICS 703A Manuale utente

Hubbell

Hubbell GAI-TRONICS 702A Manuale utente

Hubbell

Hubbell AccelTex ATS-NL-IC-ENC-15153 Manuale utente

Hubbell

Hubbell GAI-TRONICS 238-001 Series Manuale utente

Hubbell

Hubbell GAI-TRONICS 733-006 Manuale utente

Hubbell

Hubbell GAI-Tronics 707-001-UL Manuale utente

Hubbell

Hubbell B2481 Manuale utente

Hubbell

Hubbell Circuit-Lock Manuale utente

Hubbell

Hubbell GAI-Tronics 7085-001-UL Manuale utente

Hubbell

Hubbell GAI-Tronics 758-002 Manuale utente

Hubbell

Hubbell GAI-TRONICS 732-101 Manuale utente

Manuali Allegato popolari di altre marche

SilentiumPC

SilentiumPC Armis AR5 Manuale

Pulsar

Pulsar 17/TRP80/DSPR Manuale utente

Thermaltake

Thermaltake V150 TG Manuale utente

MSI

MSI MPG SEKIRA 500X Manuale utente

Antec

Antec Dark fleet DF-10 Manuale utente

Nexans

Nexans WTC05 Manuale utente

Peavey

Peavey DS 1502 Manuale utente

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuale utente

Rosewill

Rosewill RX82-U(JBOD) Manuale utente

QNAP

QNAP SAS JBOD CLI 1.0 Manuale utente

GAMDIAS

GAMDIAS Talos P1 Manuale utente

Auvs

Auvs KR615 Manuale utente

Digitus

Digitus DA-71114 Manuale utente

CommScope

CommScope FDH 3000 Manuale utente

FS FHD-FWME4 Manuale utente

JBL

JBL CS1215T Manuale utente

Pulsar

Pulsar ARAD-S4 Manuale utente

Pulsar

Pulsar AWO454 Manuale utente