Huffy Green Machine Manuale utente
STOP-ALTO-ARRET
See back page for Customer Service Information
Consulte el reverso para Servicio de Información al Cliente
Voir les pages verso pour des renseignements sur le service à la clientèle
© Copyright Huffy Corporation 2016
Owner’s Manual
This manual contains important safety, assembly, operation and
maintenance information.
Please read and fully understand this manual before operation.
Save this manual for future reference.
HGM-Mini EN-AU 091516 m0358
AU
EN
2
Your Green Machine
• Owner’s Model Identication Record..................................................... 3
• Warning and Safety Information ...........................................................4-5
• Assembly Notes - Tools Needed............................................................ 6
• Operating Your Green Machine ............................................................. 7
Model Assembly
• Parts Assembly List ............................................................................... 8
• Assemble the Fork and Steering Arms .................................................. 9
• Assemble Front Cowling....................................................................... 10
• Attaching Steering Linkage................................................................... 11
• Assemble Rear Axle and Steering Linkage .......................................... 12
• Assemble the Rear Wheels .................................................................. 13
• Installing the Seat ................................................................................. 14
• Installing Rear Axle Cover .................................................................... 15
Maintenance and Service
• Repair and Service ............................................................................... 16
• Torque Chart......................................................................................... 17
Warranty
• Corporation Limited Warranty............................................................... 18
Contents
3
Green Machine
Your Bike
Owner’s Model Identication Record
NOTE: This information is only available with model itself. It is not available from Huy.
Model number is on the packaging and instruction manual.
Write the model number below to keep it for future reference.
If the model is stolen, give this number and a description of the model to the police. This
will help them nd the model.
Model Number:
Purchase Date:
Model Name:
4
Warnings and Safety
Warning and Safety Information
PLEASE READ AND FULLY UNDERSTAND THIS OWNERS MANUAL BEFORE OPERATING
THE PRODUCT
This symbol is important. See the word“CAUTION” or “WARNING” which follows it.
The word “CAUTION” is before mechanical instructions. If you do not obey these instruc-
tions, mechanical damage or failure of a part of the product can occur.
The word “WARNING” is before personal safety instructions. If you do not obey these in-
structions, injury to the rider or to others can occur.
All wheeled vehicles will provide safe, enjoyable transportation and recreation when used
and maintained properly. Like bicycling, skateboarding, and in-line skating, riding can be
dangerous even under the best of circumstances. We do not want you to get hurt. Please fol-
low all safety rules and operating instructions.
This toy should be used with caution since skill is required to avoid falls or collisions causing
injury to the user or third parties.
WARNING - TO AVOID SERIOUS INJURY:
• CHOKING HAZARD. Small parts. Not for children under 3 years.
• Adult assembly is required.
• Continuous adult supervision is required.
• The brake may be hot after continuous use. Do not touch after braking.
• Ensure rider can reach the pedals through full range of motion.
• Always wear a CPSC approved helmet while riding, with the chinstrap securely fastened.
• Always wear shoes when riding.
• Ride on smooth paved surfaces. Do not ride on streets or roadways.
• Always comply with local laws and regulations.
• Never use near motor vehicles.
• Do not ride on hills, steeply sloped areas, on or near steps, near swimming pools, or in
alleys.
• Do not ride the product at dusk, at night or at times of limited visibility.
• Do not ride o road, on grass or wet surfaces.
• Do not ride the product over curbs or bumps that can damage the steering mechanism.
• Do not wear headphones or anything else that would impair your ability to hear or see.
• Do not jump or ramp product.
• Do not tow the product.
• Do not pull any objects with the product.
• Do not push the product.
• Never ride with more than one person. Maximum weight is 50 lbs (23Kg).
• Excessive weight may cause a hazardous or unstable condition.
continued >>
5
Warnings and Safety
Warning and Safety Information - continued
• Understand all operating procedures before riding.
• Do not add a motor to the product.
• Do not modify the product.
• Before each ride check all screws, fasteners and brakes; re-tighten any that are loose.
Replace any fasteners that are damaged.
• Handlebar hand grip or tube end plugs should be replaced if damaged as bare tubes
have been known to cause injury. All products with capped handlebar ends should be
checked regularly to ensure that adequate protection for the ends of the handlebars are
in place.
• Replacement forks must have the same rake and tube inner diameter as the original
product.
• Know your limits. Be familiar with your abilities. Use common sense.
• Replace worn or broken parts immediately.
• If anything does not operate properly, discontinue use.
IF YOU HAVE ANY QUESTIONS REGARDING THE OPERATION OF THIS
PRODUCT, PLEASE REFER TO THIS OWNERS MANUAL OR CALL
CONSUMER SERVICE
6
Assembly Notes
Assembly Notes
Required Tools
Phillips Screwdriver Metric Allen Wrench (supplied)
Torque Wrench (recommended)
The instructions in this manual refer to the right and left side of the product, these are
dened from the rider position. Do not discard any parts until the unit is completely as-
sembled.
7
Steering your Green Machine
Leaning into a Turn
Operation
Steering Function:
• Pulling back on the
left lever, and pushing
forward on the right
lever will turn the
product towards the left.
• Pulling back on the
right lever, and pushing
forward on the left lever
will turn the product
towards the right.
• Steering this product
takes some practice.
Ensure the rider can
properly steer the prod-
uct. Practice in an open
area.
WARNING: Failure to
lean in the direction of the turn
as shown can result in the unit
rolling over.
Lean INTO a
LEFT Turn
Lean INTO a
RIGHT Turn
8
Parts Assembly
# Description # Description
1Front Wheel Assembly 11 Rear Wheels (x2)
2Pedal Set 12 Rear Axle Cover
3Front Fork 13 Axle Pivot Bolt and Stop
4Fork/Frame Bushing 14 Axle Pivot Support
5Fork Mounting Hardware 15 Rear Axle
6Steering Handlebar Hardware 16 Axle Bushing (x2)
7Front Cowling 17 Axle Cap and Screw (x2)
8Cowling Badge 18 Frame Tube
9Steering Arms 19 Left and Right Steering Linkage
10 Seat and Hardware
98 10 11 12
1
3
4
7
182 19
17
11
5 6
161513 14
Parts Assembly
9
Assembly
Assemble the Fork and Steering Arms
STEPS:
NOTE: Make sure Seat Bracket is pointing UP before starting.
1. Insert Fork Tube Afully into the Frame Tube Bso that both Mount Holes Cline
up.
2. Insert Pivot Shaft Dthrough Frame. Place Bushings Eon each side of Pivot Shaft
as shown.
3. Hold one Steering Arm Fso that it is curved BACKWARDS and place on Pivot Shaft
D.
4. Install Washer Gand Screw H.
5. On opposite side, place Steering Arm Fagainst Bushing E, making sure Steering
Arm is curved BACKWARDS.
6. Install second Washer Gand Screw H.
7. Tighten both Screws Hsecurely with two allen wrenches. - Make sure Steering
arms move easily back and forth.
See Torque Chart for recommended torque.
Attach Steering Linkage >>
A
B
CD
E
F
H
G
G H
F
NOTE:
Remove and set aside Bolt
from mounting hole C.
10
Assembly
Assemble the Front Cowling
D
E
E
F
A
H
B
C
G
TIP: Rotate Wheel/Fork assembly over so that mounting hole Dimple His on TOP.
NOTE: If needed, loosen Steering Arm screws during assembly, then retighten. See Torque
Chart for recommended torque.
1. Attach the Cowling Aby sliding it down and back on the Fork so that the Cutouts B
t around the fork legs.
2. Insert SHORT Shoulder Screw Cdown through Cowling, Frame Dand fully inserted
Fork Tube E.
3. Install Screw Ffrom the bottom and tighten securely with two allen wrenches. See
Torque Chart for recommended torque.
4. Snap both Cowling Badge Tabs Ginto place as shown.
CAUTION: Ensure Wheel turns smoothly without rubbing.
Altri manuali per Green Machine
6
Indice
Altri manuali Huffy Scooter
Huffy
Huffy Tilt N Turn Manuale utente
Huffy
Huffy Pro Manuale utente
Huffy
Huffy m0095 Manuale utente
Huffy
Huffy Bubble Manuale utente
Huffy
Huffy m0381 Manuale utente
Huffy
Huffy In-Line Manuale utente
Huffy
Huffy H-eScooter Manuale utente
Huffy
Huffy Green Machine Manuale utente
Huffy
Huffy FLIP SCOOTER Manuale utente
Huffy
Huffy Tilt N Turn Manuale utente
