Human Touch HT-9200 Guida all'installazione

X1103

October 17, 2010

REMOVING THE FOOT-AND-CALF MASSAGER

1. Using two people, gently tip the chair onto its side (Fig.1).

2. Use the remote control to deploy the foot-and-calf massager until the connector box becomes

accessible (about 75% full deployment) (Fig.2).

3. Power off the chair, then unplug it.

4. Using a nail clipper or other suitable instrument, cut the zip ties that secure the connector box

to the chair frame (Fig.2).

5. Using a Phillips-head screwdriver, remove the four screws that secure the connector box cover,

then remove the cover (Fig.3).

6. Disconnect the connectors (Fig.4)

7. Using a nail clippers or any other suitable instrument, cut the zip-tie that secures the massager harness

to the frame (Fig.5).

Tools Required: Phillips-head screwdriver, nail clippers or other instrument suitable for cutting zip ties, new zip ties. NOTE: SAVE ALL SCREWS FOR USE DURING REASSEMBLY.

REPLACING THE FOOT-AND-CALF MASSAGER

HT-820/9200

It is imperative that Human Touch® products are repaired in a manner that ensures product safety and regulatory compliance and that is fully consistent with the practices used

during the manufacturing process. Therefore, Human Touch requires that all product repairs are performed using only factory-new parts and in accordance with these repair

instructions. Failure to adhere to these instructions voids the product warranty and releases Human Touch from all liability for injury or product damage resulting from the repair.

SERVICE LEVEL: 3

(Fig.1)

Zip ties (Fig.2)

Connector box

(Fig.3)

Connectors

(Fig.4)

Zip-tie

(Fig.5)

8. Locate the two screws located inside the foot-and-calf massager’s rubber housing and remove them (Fig.6).

9. Using a Phillips-head screwdriver, remove the two screws that secure the fabric strip that holds the rubber housing in place, then remove the fabric strip (Fig.7).

10. Locate the five Phillips-head screws that secure the opposite side of the fabric strip that holds the rubber housing in place, then remove the screws and strip (Fig.8).

11. Using a Phillips-head screwdriver, remove the two screws that secure the two fabric strips that secure the foot-and-calf massager to the frame (Fig.9).

12. Pull the foot-and-calf massager forward to remove it from the chair (Fig.10).

(Fig.6)

Fabric strip

(Fig.7)

(Fig.8) (Fig.9) (Fig.10)

Foot-and-calf massager

Foot-and-calf

massager

INSTALLING THE FOOT-AND-CALF MASSAGER

1. Place the foot and calf massager into position on the frame.

2. Place the fabric strip that secures the foot-and-calf massager to the frame into position, then secure it using two Phillips-head screws (Fig.11).

3. Place the fabric strip that secures the top rubber housing into position then secure it using Five Phillips-head screws (Fig.12).

4. Place the fabric strip that secure the bottom rubber housing into position then secure it using two Phillips-head screws (Fig.13).

5. Replace the two screws inside the open slot in the rubber housing.

6. On the underside of the chair, reconnect the connectors.

7. Using the zip-tie, secure the calf massager harness to the frame (Fig.14).

8. Place the connectors into position inside the connector junction box (Fig.15), replace the junction box cover, then replace the four screws

to secure it (Fig.16).

9. Use a new zip tie to secure the connector box to the chair frame (Fig.17).

10. Using two people, gently return the chair to an upright position.

11. Plug in the chair, power it on, then verify that the new foot and calf massager is working properly.

(Fig.11)

Foot-and-calf

massager

(Fig.12)

Fabric strip

(Fig.13)

(Fig.15) (Fig.16)

Zip ties

(Fig.17)

Connector box

Connectors

Please send any questions or comments regarding these instructions to: [email protected]

Zip-tie

(Fig.14)

Altri manuali per HT-9200

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Human Touch Massaggiatore

Human Touch

Human Touch CERTUS Manuale utente

Human Touch

Human Touch iJoy-200 Manuale utente

Human Touch

Human Touch IJOY HT-2720 Manuale utente

Human Touch

Human Touch HT-120 Istruzioni operative

Human Touch

Human Touch HT 7120 Manuale utente

Human Touch

Human Touch ThermoStretch HT-7120 Manuale utente

Human Touch

Human Touch HT-100 Manuale utente

Human Touch

Human Touch ht 135 Manuale utente

Human Touch

Human Touch PC-420 Manuale utente

Human Touch

Human Touch HT-9200 Manuale utente

Human Touch

Human Touch iJoy250 Manuale utente

Human Touch

Human Touch pc 075 Manuale utente

Human Touch

Human Touch AcuTouch 8.0 Manuale utente

Human Touch

Human Touch Robotic Massage iJoy2400 Manuale utente

Human Touch

Human Touch iJoy250 Manuale utente

Human Touch

Human Touch HT-Reflex 2 Manuale utente

Human Touch

Human Touch iJOY-245 Manuale utente

Human Touch

Human Touch HT-2620 Manuale utente

Human Touch

Human Touch WholeBody 5.1 Manuale utente

Human Touch

Human Touch feel better HT-245PS Manuale utente

Human Touch

Human Touch feel better Cirqlation HT-1355 Manuale utente

Human Touch

Human Touch CIRQLATION HT-1340 Manuale utente

Human Touch

Human Touch Acuvibe ht1260 Manuale utente

Human Touch

Human Touch SANA Manuale utente

Manuali Massaggiatore popolari di altre marche

ELEEELS

ELEEELS P2 Manuale utente

Cenocco

Cenocco CC-9111 Manuale utente

Panasonic

Panasonic EP790-C1 Manuale utente

Adler

Adler AD 2167 Manuale utente

Taurus

Taurus Wellness TW-MC-M Manuale utente

Infinity

Infinity Syner-D Circadian Manuale utente

Hydas

Hydas LH-095 Manuale utente

AEG

AEG FM 5567 Manuale utente

OBH Nordica

OBH Nordica Shiatus Tunes Manuale utente

Hutech

Hutech Q9 Manuale utente

Medisana

Medisana MM 825 Manuale utente

SOLAC

SOLAC Therma Hydro Manuale utente

Invacare

Invacare Texas Manuale utente

Casada

Casada Bismarck II Manuale utente

Fujiiryoki

Fujiiryoki Cyber-Relax EC-1700 Manuale utente

Medisana

Medisana HM 886 Manuale utente

HoMedics

HoMedics BA-C200 Manuale utente

Repose

Repose Lynton Manuale utente