Hunter 44860 Manuale utente

Form# 44002-01

20091118

TouchscreenTouchscreenTouchscreen

installation and

operation manual

Model

44860

Programmable Thermostat

English

TABLE OF CONTENTS

IMPORTANT INFORMATION........................4

INSTALLATION PROCEDURES ...................4

GENERAL OPERATING INSTRUCTIONS ...21

DATE & TIME SETTINGS..............................22

SYSTEM SETTINGS MENU..........................27

USER SETTINGS MENU ..............................31

TEMPERATURE RANGE..............................34

ENERGY SAVING DEFAULT PROGRAMS ..35

MANUAL OPERATION ..................................36

PROGRAM OPERATION ..............................39

PROGRAM OVERRIDES ..............................46

ADDITIONAL FEATURES .............................56

CLEAN SCREEN ...........................................56

CHANGE FILTER...........................................60

ENERGY MONITOR FUNCTION ..................64

TROUBLESHOOTING ...................................68

WIRING DIAGRAMS .....................................72

44002-01 R111809

Touchscreen Programmable

Thermostat

Model 44860

2 Stage Heat/2 Stage Cool

Congratulations!

Thank you for choosing a Hunter

programmable thermostat. Your new Hunter

thermostat will provide years of reliable

service and year-round energy savings.

Please read this manual before beginning

installation and save this booklet for

complete operating instructions.

44002-01 R111809

IMPORTANT INFORMATION

This thermostat is designed to work on the following heating and cooling

systems:

Up to 2 Stage Heat/2 Stage Cool Millivolt Systems

Heat Only or Cool Only Systems 2-wire Hydronic Systems

Single and Multi-Stage Heat Pumps AC or Hard-wired

Gas, Electric or Oil Systems

This thermostat is not designed for use with 110V/220 V systems. If you

are unsure of what kind of heating and cooling system you have, please

contact a qualified HVAC Technician for assistance.

INSTALLATION PROCEDURES

TOOLS

This thermostat includes two #8 slotted screws and two wall anchors

for mounting. To install your new thermostat, you will need the following

supplies:

44002-01 R111809

Flat-head screwdriver, Small Phillips-head

screwdriver, Hammer

Electric drill and 3/16” bit, Three 1.5 Volt (AA) size

alkaline batteries

NOTICE OF CAUTION! DO NOT

disconnect the wires from the existing

44002-01 R111809

thermostat before reading these instructions. The

wires must be labeled prior to removal to ensure

proper connection.

UNINSTALLING THE EXISTING UNIT

1. Turn the system power OFF at the existing thermostat. Turn the power

to the HVAC system OFF at the main power panel or at the furnace.

(Failure to turn off the power to the existing thermostat before removal could damage

your system.)

2. Remove the existing thermostat cover to access the wires from the

wall. (Some thermostats may have multiple covers, screws or other

locking devices that must be removed or disengaged.)

3. Locate, but do not disconnect the wires.

(If wires are not visible, they may be connected to the back of the wall plate. Some

models may have doors that open to expose the wires and mounting screws.)

44002-01 R111809

4. Do not let the wires slip back into the wall during disconnection. You

may want to secure the wires to the wall as you disconnect them. After

all wires are labeled, disconnect each wire and remove the existing

wall plate. (Any unused wires should be capped with an approved

electrical connector, such as electrical tape.)

44002-01 R111809

if your existing

thermostat is marked:

label the wire

with this sticker:

Heating Transformer

Power Supply

Y1 / Y2

Cooling Stage 1 or 2

W1 / W2

Heating Stage 1 or 2

24 VAC Common

(if available)

CONVENTIONAL HVAC SYSTEMS

Fan

R / RC

R/RC

Cooling Transformer

Power Supply

if your existing

thermostat is marked:

label the wire

with this sticker:

W1 W2

W2 W1

Y1 Y2

Y2 Y1

See pages 72-73 for a complete wiring diagram.

44002-01 R111809

Indice

Altri manuali Hunter Termostato

Hunter

Hunter 43860 Manuale utente

Hunter

Hunter Set & Save 47250A Manuale utente

Hunter

Hunter Internet Thermostat Manuale utente

Hunter

Hunter 42996 Manuale utente

Hunter

Hunter 44110B Manuale utente

Hunter

Hunter 47550 Manuale utente

Hunter

Hunter Internet Thermostat Manuale utente

Hunter

Hunter Enermy Monitor IIPlus 44407 Manuale utente

Hunter

Hunter 40170 Manuale utente

Hunter

Hunter 44550 Manuale utente

Hunter

Hunter 42122 Manuale utente

Hunter

Hunter JustRight Manuale utente

Hunter

Hunter Set & Save 47110A Manuale utente

Hunter

Hunter Set & Save 47350A Manuale utente

Hunter

Hunter 40170 Manuale utente

Hunter

Hunter 44272 Istruzioni per il montaggio

Hunter

Hunter 47132 Manuale utente

Hunter

Hunter 40120 Manuale utente

Hunter

Hunter 44459 Manuale utente

Hunter

Hunter 42710-01 Manuale utente

Hunter

Hunter 44155C Manuale utente

Hunter

Hunter 44660 Manuale utente

Hunter

Hunter 44155C Manuale utente

Hunter

Hunter Set & Save 47200A Manuale utente

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Honeywell

Honeywell CM721 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

Honeywell

Honeywell RLV4305 Manuale utente

Honeywell

Honeywell Prestige 2.0 THX9421 Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente