Husqvarna TS73R Manuale

Standard Operating Procedure

HUSQVARNA TILE SAW 9” TS73R

Version 2 Issue date: 10/06/2016

Page 1 of 3

20 Goodshed Road Upper Hutt

Phone 04 528 4473

Name

Husqvarna Tile Saw 9” TS73R

Recommended Use

When used with a Diamond Disc, for water-lubricated

cutting of marble, stone, granite, brick and facings,

including porcelain, glazed tiles, ceramics etc

Section 1: Equipment Details

Manufacturer

Husqvarna Construction Products

Supplied by Youngman Richardson & Co, NZ

wwwyrco.co.nz

Emergency Contact details

Garry Bull (Upper Hutt Hire) 027 742 6583

IMPORTANT: The information contained in this SOP is intended as a summary only. Users must

read the operating manual and familiarize themselves with the equipment before commencing

use.

Section 2: Hazards Identification

HIGH SPEED BLADE Keep hands and limbs clear of

the blade and mechanism at all times. RISK of limbs

being crushed or severed. If a blockage occurs turn off

power, unplug the electrical cable and allow the

machine to come to a complete stop before clearing

obstructions.

Operate this item only on an electrical supply

equipped with a 30 mA earthed current-limiting circuit

breaker (RCCB).

DO NOT use the equipment for any other purpose

other than that for which it was designed. Use only an

approved blade supplied by Upper Hutt Hire.

Do not allow persons to operate machinery without full

and proper instruction in the use of the machine. Do

not allow person under 16 years age to operate the

machinery.

Always keep safety guards in place.

Avoid loose-fitting clothing. Risk of entrapment in

machinery.

Always ensure water supply is abundant, and dust

minimised.

Operation of the equipment must not be performed by

persons under the influence of alcohol, drugs, medications

or any chemical substances capable of impairing the

abilities of that person.

Standard Operating Procedure

HUSQVARNA TILE SAW 9” TS73R

Version 2 Issue date: 10/06/2016

Page 2 of 3

20 Goodshed Road Upper Hutt

Phone 04 528 4473

Never leave the engine running when unattended. Shut the

machine down even if unattended for a short period.

Parts of machine may be hot. Touching may result in

burns. Wear protective gloves.

Unit weighs 43 kg. Take care when lifting. Requires two

people to lift.

Section 3: Additional Information

Certification: Does this item require special

licensing or certification?

Additional links? Worksafe NZ etc

None available at time of issue.

Section 4: Power Source

Electrical

Single Phase 230 volt. Machine is rated at 1000W.

Use RCCB or other suitable electrical protection.

Section 5: Log Book

Does this equipment require a daily check and entry in the log book?

Section 6: Personal Protective Equipment (PPE)

Appropriate personal protective equipment (PPE) is required for the operator and

persons assisting with loading and unloading.

Section 7: Emergency precautions for site

Do you have a

FIRST AID KIT?

Do you have a

FIRE EXTINGUISHER?

Can you make an

EMERGENCY CALL?

Standard Operating Procedure

HUSQVARNA TILE SAW 9” TS73R

Version 2 Issue date: 10/06/2016

Page 3 of 3

20 Goodshed Road Upper Hutt

Phone 04 528 4473

Section 8: Operating instructions

1. To start the machine press the green button on the switch.

2. To stop the machine, press the red button.

Section 9: Transport

1. Unplug the machine

2. Lock the head on the rear part of the saw, using clip ‘A”, so that the head is

secured.

3. Loosen the two flywheels (B) of the front legs, and swivel them to a horizontal

position, then retighten the flywheels.

4. Repeat the same procedure for the back legs.

5. To reinstall the machine on its legs, carry out the above procedure in reverse.

Section 10: Additional Information

Always use common sense! It is not possible to cover every conceivable situation you can face when using our equipment.

Always exercise care and use your common sense. Avoid all situations which you consider to be beyond your capability. If

you still feel uncertain about operating procedures after reading these instructions and the owner’s manual, you should

consult an expert before continuing.

The information contained herein is true and accurate to the best of our knowledge. No warranty or guarantee is expressed

or implied regarding the accuracy of information or instructions. Users MUST consult the manufacturer’s manual or

handbook. While every effort has been made to summarise the important Health and Safety information for the safe use of

this equipment, Upper Hutt Hire Ltd shall not be liable in any way for any reliance by any person or entity on the accuracy

of information or data contained in this document or its attachments.

Revision date

June 2021 (SOP based on Husqvarna Manual TS73R 115 03 00-20 2007-03-15)

Indice

Altri manuali Husqvarna Sega

Husqvarna

Husqvarna 165R Manuale di istruzioni

Husqvarna

Husqvarna 535FBX Manuale utente

Husqvarna

Husqvarna TS 355 B Manuale utente

Husqvarna

Husqvarna K 970 III Manuale utente

Husqvarna

Husqvarna TS73R Manuale

Husqvarna

Husqvarna Soff-Cut 150 E Manuale utente

Husqvarna

Husqvarna MS360 Manuale utente

Husqvarna

Husqvarna TS 60 Manuale utente

Husqvarna

Husqvarna MS 355 Manuale utente

Husqvarna

Husqvarna 750 Manuale utente

Husqvarna

Husqvarna WS 440 HF Manuale utente

Husqvarna

Husqvarna Soff-Cut 2000 Manuale utente

Husqvarna

Husqvarna TS 100 R Manuale utente

Husqvarna

Husqvarna CS 10 Manuale utente

Husqvarna

Husqvarna K 4000 Cut-n-Break Manuale utente

Husqvarna

Husqvarna Soff-Cut 150D Manuale utente

Husqvarna

Husqvarna FSA 8400 D Manuale utente

Husqvarna

Husqvarna TS 250 XS Manuale utente

Husqvarna

Husqvarna FS 3500 G Manuale utente

Husqvarna

Husqvarna 450 Rancher Manuale utente

Husqvarna

Husqvarna 5000 Manuale utente

Husqvarna

Husqvarna FS7000 DL Manuale utente

Husqvarna

Husqvarna MS 355 Manuale utente

Husqvarna

Husqvarna 1152450-26 Manuale utente

Manuali Sega popolari di altre marche

RIDGID

RIDGID BS1400 Manuale utente

ATIKA

ATIKA BWS 400-2 Manuale utente

RGC

RGC FS20 Manuale utente

Makita

Makita M2300 Manuale utente

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuale utente

IMET Spa

IMET Spa SIRIO 370 AF-E Manuale utente

Optimum

Optimum OPTisaw CS 275 Manuale utente

Makita

Makita BPB180 Manuale utente

Stihl

Stihl MS 462 C-M Manuale utente

AEG

AEG TS 250 K Manuale utente

Meec tools

Meec tools 004665 Manuale utente

Makita

Makita LS1018L Manuale utente

Ryobi

Ryobi RCS1400 Manuale utente

DeWalt

DeWalt DCS391 Manuale utente

Sealey

Sealey SA72 Manuale utente

skilsaw

skilsaw SPT88 Istruzioni per il montaggio

Urrea

Urrea SI810 Dimensioni e guida di installazione

EINHELL

EINHELL BKG 210/1 Manuale utente