Hussmann IMPACT CW2-EGE Manuale utente

NOTE: Be sure merchandisers have

been leveled according to the installa-

tion instructions. Carefully unpack and

inspect the CW2 Joint Kit, making

sure there is no

breakage or damage.

Be sure factory installed alignment pins

are in place.

NOTE: Apply gasketing to one case

only.

1Apply Gaskets – 1 and 2

as shown in Figure 1.

• Remove paper backing as

gasket is applied.

• Apply two rows of Gasket 1 to

the center flue foam area only.

• Lapgasketsatlower

corners.

• Check that there are no gaps

betweengasketandmerchandiser.

• Do not stretch gasket,

especially around corners.

• Do not butt gaskets; always

overlap joints.

CW2-GE/CW2-XGE

CW2U-GE/CW2U-XGE

CW2EGE/CW2EXGE

Joint Kit Instruction

Shop Around Medium Temperature Convertible Merchandisers

January 2001

P/N 419410A

JOINT

JOINT KIT

KIT

PARTS LIST

Item No. Quantity Description

1. 2Gasket 1/2x 1/2x 180 in.

2. 1Donut Gasket

3. 8Nut Retainer 5/16-18

4. 8Cap Screw5/16-18 x 3/4

5. 2Cap Screw 5/16 - 18 x11/4

6. 2Lock Washer Split Steel 5/16

7. 2Flat Washer 5/16

8. 2Hex Nut 5/16 - 18

9. 2Joint Base Plate (end case only)

10. 12 Thread Cutting Flange Screw (end case only)

Splashguard Brackets

MUST BE INSTALLED

BEFORE PIPING CASE.

Figure 1. Installing Gaskets

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

1/2 x1/2In. Gasket

Donut Gasket

ALL

MODELS

CW2U-GE/CW2U-XGE

CW2-GE/

CW2-XGE

CW2-GE/

CW2-XGE

CW2EGE

CW2EXGE

P/N 419410A

Merchandisers

FRONT

CASE

Bumper

Return Air

Grille

Front

Glass

Package

Guard

Channel

Interior

Glass

Panel

Package

Guard

Interior

Glass

Detail B.

Front

Grille

Assembly G

Detail C.

Detail A.

HUSSMANN CORPORATION •BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

2A. Remove shelves (if installed).

B. Remove honeycomb at end

to be joined.

C. Lower light channels. See

Detail A.

D. Remove display racks and

pans.

E. Remove wire rack support.

F. Lift out interior back panel.

G. Remove front grille assembly.

See Details B and C.

Figure 2. Removing Parts

Parent Case

Detail D.

Detail E.

Parent Case

Unitized

Case

End

Case

Follow joining sequence using

appropriate cap screw, retainer,

and hex nut as shown above.

TIGHTEN IN SEQUENCE SHOWN.

HUSSMANN CORPORATION •BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

Figure 3. Installing Retainer Clips, Fasteners and Joining Bolts

P/N 419410A

Shop Around MediumTemperature Convertible

Joint Kit Instruction

Cases should be pushed

tightly together guided by

alignment pins.DO NOT

pull together by bolts.

4Install Nut Retainer – 3 and

3/4in. Cap Screw – 4 at locations

shown in Figure 3.

Do not tighten fully.

BE SURE TO FOLLOW BOLTING

SEQUENCE CORRECTLY.

5Install 11/4in. Cap Screw – 5

LockWasher – 6,

Flat washer – 7 and

Hex Nut – 8.

Start at the bottom locations.

Tighten the joints in the order

shown, Wfirst, then at the center

uprights X, then canopies Y, and

then Z.

See drawing and Details D and E for

installation sequence and locations.

3Move the first two cases to be

joined together and into position

against each other matching

Alignment Pins with the corre-

sponding holes.

CAUTION

END CASE

HUSSMANN CORPORATION •BRIDGETON, MO 63044-2483 (Printed in U.S.A.)

Merchandisers

P/N 419410A

Figure 4. Attaching Joint Plates to End Case

FOR END CASE ONLY:

6Attach Joint Base Plate – 9

to the legs on both sides of the

end case joint using

Screws – 10. See Figure 4

and Detail F.

Joint

Base

Plate

FRONT OF END CASE

Detail F.

9Joint

Base

Plate

FRONT OF CASE

End Case

Leg

HUSSMANN CORPORATION •BRIDGETON, MO 63044-2483 (Printed in U.S.A.) 5

Shop Around MediumTemperature Convertible

Joint Kit Instruction P/N 419410A

7Slide the alignment strips

between front glass sections at

each joint. See Figure 5.

8Refer to the installation instruc-

tions to install the splashguard

brackets.

Figure 5. Inserting the Alignment Strips

Alignment Strip

Altri manuali per IMPACT CW2-EGE

Questo manuale è adatto per i seguenti modelli

Altri manuali Hussmann Merchandiser

Hussmann

Hussmann ESC Istruzioni operative

Hussmann

Hussmann MWGE Manuale utente

Hussmann

Hussmann GWIC Manuale utente

Hussmann

Hussmann LIG Manuale utente

Hussmann

Hussmann GSVM Manuale utente

Hussmann

Hussmann HEDW Manuale di istruzioni

Hussmann

Hussmann FN Manuale di istruzioni

Hussmann

Hussmann FL5NX-LEP Manuale di istruzioni

Hussmann

Hussmann IMPACT ED1C-ICE Manuale utente

Hussmann

Hussmann Q1-DC Wedge Istruzioni operative

Hussmann

Hussmann LBN Guida rapida

Hussmann

Hussmann RCD Istruzioni operative

Hussmann

Hussmann D5L-EP Manuale utente

Hussmann

Hussmann IMPACT D6 Manuale utente

Hussmann

Hussmann PVWI Manuale utente

Hussmann

Hussmann microSC VRL1B Manuale utente

Hussmann

Hussmann M1X-EP Manuale di istruzioni

Hussmann

Hussmann Chino RDI-20 Istruzioni operative

Hussmann

Hussmann C2XEC-E Manuale di istruzioni

Hussmann

Hussmann C2XEC-XE Manuale di istruzioni

Hussmann

Hussmann FMRA Manuale utente

Hussmann

Hussmann BEXD Manuale utente

Hussmann

Hussmann IMPACT RL Manuale utente

Hussmann

Hussmann CGDMG Manuale utente

Manuali Merchandiser popolari di altre marche

FRIGOGLASS

FRIGOGLASS Flex 20 HC Manuale utente

EPTA

EPTA COSTAN RHINO MULTI Manuale utente

CASCO

CASCO Nano Cube Manuale utente

True

True GDIM-26 Manuale utente

Structural Concepts

Structural Concepts Oasis Mobile Series Istruzioni per l'installazione

Haussmann

Haussmann RL Manuale utente

Howard McCray

Howard McCray R-CDS32E-4 Manuale utente

EPTA

EPTA iarp Cool Emotions Delight Lite Manuale utente

VALERA

VALERA BC 85 Manuale utente

HL Display

HL Display 3eBin Manuale utente

Dixie Narco

Dixie Narco DNCB 501E Manuale utente

APW Wyott

APW Wyott Racer DMXD-30H Manuale utente

Hoshizaki

Hoshizaki KD-90C Manuale utente

Summit

Summit SCR1006 Manuale utente

Delfield

Delfield Shelleyspeed SPM-28E Manuale utente

EPTA

EPTA iarp Cool Emotions GLEE 40 Manuale utente

Kysor/Warren

Kysor/Warren GranBering KW Guida

Crane

Crane BevMAX Refresh 6 Media Manuale utente