IMPORTANT PRODUCT INFORMATION
READ IMMEDIATELY
SAFETY FIRST!
Failure to observe the following safety warnings may result in serious injury or death. Use all
Hydro Crunch™ products only as directed. Failure to observe these safety warnings will result in
a waiver of any and all liability on the part of Hydro Crunch™ its manufacturer, and resellers,
and will void all warranties to the extent permitted by law.
WARNINGS AND INSTRUCTIONS
FOR USE:
Disconnect power before re-lamping.
When re-lamping, make sure lamp has time to cool before touching.
Make sure power cord is connected properly
DO NOT hang by power cord or lamp cord.
DO NOT make contact with the interior of the socket while the power is on.
DO NOT plug or unplug a lamp cord while the ballast is turned on.
ALWAYS unplug the ballast from the power source before connecting or disconnecting
any lighting device to ballast, moving ballast, or otherwise touching or handling ballast or
its components.
DO NOT use with generators. Warranty will be voided.
NEVER stand beneath the ballast.
NEVER put hands or any other objects in the interior of the ballast.
DO NOT operate this or any lighting system in wet areas.
DO NOT plug this system into a supply voltage other than what is instructed on your
fixture.
DO NOT attempt open or rewire the components of the light system. It will void the
warranty and may cause serious injury or death.
If any part of the lamp is damaged, replace lamp immediately.
Disconnect the unit from a power source before replacing lamps or any other parts.
When replacing lamps, make sure the lamp has had time to cool before touching.
Make sure power cord and lamp cord are connected securely to the unit.
These products operate at very high temperatures. Keep away from children.
Glass is required for reflectors using metal halide (MH) lamps for UL listing to apply.
Glass is not required for high pressure sodium (HPS) lamps to be UL listed.
Always use a three prong timer rated for 15 amps or more with light systems.
Do not operate lamps that are a different wattage than the ballast specifies.
Read all instructions completely before attempting to power on unit. Failure to follow
the warnings and instructions for use may result in serious injury or death, for which
Hydro Crunch™'s manufacturer and resellers expressly disclaim any and all liability.
