Power
(Illuminated white
when on. Yellow
when off.)
Power Inputs
Mute
Volume
Up / Down
Center = Select
Directional Keys
Volume Control
·= Directional keys
Center = Select
AUX
Input
OLED Display
FRONT PANEL CONTROLS DIAGRAM
REMOTE CONTROL DIAGRAM
WARNINGS
ALIGNMENT
HyperSound®Audio
Area of no effect
Area of no effect
Area of enhanced clarity
Area of no effect
Sit in your intended location and adjust the HyperSound Clear™ speakers until you can see your reflection centered in each speaker.
Choose from four available Equalizer Settings. Two additional EQ settings may also be programmed by a hearing health care
professional based on your personal hearing level. Visit www.hypersoundhearing.com/locations to find a provider. • Important warning for wearers of hearing aids - Because HyperSound audio is focused, you may need to decrease the volume
or sensitivity of your hearing aid if you feel that the sound is too loud or you experience any acoustic feedback (squeal or
whistle sound) or any other sound artifacts in the ears. If you are unable to adjust your hearing aid and you are experiencing
any discomfort to your ears while listening to HyperSound Clear, please remove your hearing aids, step outside of the
HyperSound sound zone, or discontinue use of the HyperSound Clear with your hearing aid.
• Never hold a speaker up to your ear. Maintain at least 18 inches (0.5 meter) distance between the speaker and any listener.
• Hazard Warning! High Voltage. This situation or condition can cause injury due to electric shock. NEVER OPERATE THE
APPARATUS WITH THE FRONT GRILL OF THE SPEAKER REMOVED, HIGH VOLTAGES ARE PRESENT.
• Oxygen vigorously accelerates combustion. Do not operate the apparatus in an environment with flammable gases or liquids.
• HyperSound Clear should be installed and used under adult supervision. The product packaging includes plastic bags and
small parts that could create a choking risk. Quickly and safely discard plastic bags, twist ties, protective plastic film, and
protective caps on the optical cables and connectors.
Review all warnings, cautions, and detailed procedures in the HyperSound
Clear™ 500P User Guide before using your new directed hearing solution.
• Pressing Select when Equalizer is highlighted takes you to the
Equalizer setting menu.
• Use Up/Down buttons to get to the Equalizer setting desired and hit Select.
• Standard mode is flat across all frequencies.
• Bright 1, Bright 2 and Bright 3 emphasize higher frequencies.
• Personal 1 and Personal 2 are available only when programmed by a hearing
health care professional.
For Support Contact: 888-496-8001 or
visit www.hypersoundhearing.com.
OPTICAL 1
OPTICAL 2
RCA - Back
AUX- Front
Area of no effect
Area of no effect
Area of enhanced clarity
HyperSound®Audio
VOLUME = 12
MUTE ON
MUTE OFF
ACTIVE
INITIATING
REPLACING REMOTE CONTROL BATTERIES
1. Remove Battery Cover 2. Insert 2 AAA batteries 3. Replace Battery Cover
426-008-004-001RA
Top-down View Side View
EQUALIZER SETTINGS
© 2016 Turtle Beach Corporation (“TBC”). All rights reserved. HYPERSOUND CLEAR and the HyperSound logo are proprietary trademarks of TBC. Manufactured under license
from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. All other trademarks are properties of their respective owners.
Be sure to select the Input that matches your
Input connection method.
EQUALIZER
BRIGHT 3
BRIGHT 2
PERSONAL 2
PERSONAL 1
BRIGHT 1
STANDARD
Primary Connection (Used if AV Receiver does not have Digital Out)
Alternative Connection (Used if AV Receiver has Digital Out)
