Hysnox Shark 02 Manuale utente
①
②
Shark 02 wireless headset intercom
1.Introduction
1.1 Product Overview
Thank you for choosing Shark 02 helmet Bluetooth
intercom headset, This is a helmet mounted Bluetooth intercom
specially designed for motorcycle riders. It integrate the
function of intercom, telephone, music, FM radio and GPS
navigating voice prompt during riding. Riders now can have a
clear, safe and comfortable experience in the journey.
Shark02 has Bluetooth, stable system operation, dual
intelligent noise reduction, low power consumption, strong
pickup effect, multiple device connection support, strong
compatibility. It is a fashionable compact, energy-saving and
environmental friendly high-tech Bluetooth product with
humanized design.
1.2 Product instruction chart
③
1.3 Main Functions
Applicable people:
Motorcycle and bicycle riders; skiers; take-away riders;
electric vehicle people; construction and mining workers;
firefighters and traffic police, etc.
④
2.1 Power on / off
Power on: Press and hold【on/off】for 2 seconds, hear the
power-on tone, red and blue lights flashing alternately, the
power-on is complete (if connected to Bluetooth will be blue
lights flashing slowly);
Power off: Press and hold【on/off】for 4 seconds, hear the
shutdown tone, the red light will be on for 1 second, shutdown
is complete.
Restore factory settings:
Press and hold【on/off】+【multi-function】key for 2 seconds,
the red light and blue light will be on at the same time, and the
shutdown beep will be heard to enter the restore factory settings
--------------------------------------------------------------------------------------------
2.2
①Answer the call:when there
is an incoming call, short press
[multi-function]key to answer
the call.
⑤
②Automatic answer: when an incoming call rings for 8
seconds without any operation, the Bluetooth intercom will
automatically answer the call.
③Reject the call: Press and hold the [multi-function key] for
2 seconds when you hear an incoming call ring to reject the call.
④End call: During a call, short press【multi-function】key to
end the call.
⑤Redial the last number: In standby mode, quickly
double-click 【on/off 】to automatically dial one of the last
numbers dialed.
⑥Cancel auto-answer:
If you do not need the auto-answer function, you can
long press【multi-function】key+ [FM ]key to cancel or open the
auto-answer function (the initial state of the default
auto-answer);
Indicator status: flashing blue light three times to open
auto-answer flashing red light three times to close auto-answer.
--------------------------------------------------------------------------------------------
2.3
Play / pause: in Bluetooth connection mode, press the
【multi-function】key once to
control the music play / pause;
forward: Pressing the volume
up button once to select the
next song.
Reverse: Pressing the volume
down button once to return to
the previous music.
⑥
2.4
Long press the volume up key
without releasing to increase the
volume, long press the volume
reduction key without releasing to
decrease the volume.
volume adjustment is subject to
what you want; the highest volume
has an alarm tone prompt.
2.5
①Turn on the radio: In standby mode, long press [FM ] for 2
seconds to start FM radio.
②After turning on the FM radio, each time you press the
volume up or decrease key, you can tune the station to select
the station (Note: often press the volume up/decrease key
without letting go is to enter the volume adjustment mode, at
this time you can increase the volume or decrease the volume).
③Turn off the radio: Press and hold the [FM ] for 2 seconds.
the headset will switch back to the previous state.
1
⑦
2.6
The device has a multi-language prompt tone
selection.
In the power on state, press and hold【on/off】+
[volume up/down] keys to switch the language
prompt tone, each operation switches to the next
language and can be operated in a cycle.
---------------------------------------------------------------------------------
3. How to Pair
Place the device and the phone within a distance of 1
meter in between.
3.1 Pairing mobile phone [method 1]:
1) Turn on Bluetooth: In the off state, long press the
【on/off 】for 2 seconds, until the red and blue lights
alternately flash, enter the Bluetooth waiting connection
state; if other devices have been connected will enter the
blue light slow flash, please reset and turn on the phone
again.
2) Search phone Bluetooth: In the state of alternating
red and blue lights, open the phone Bluetooth settings,
search for nearby Bluetooth devices, select "Shark"
connection pairing, pairing success will be accompanied
by a beep "Bluetooth is connected", connected to
Bluetooth successfully.
Note: If the device has a pairing record with the phone,
the device will automatically connect to the phone
⑧
Bluetooth again, no need to repeat the pairing (provided
that the phone Bluetooth is open).
Pairing mobile phone [method 2]:
After power on, in the standby state (blue light
blinking), you can also press and hold the 【on/off 】+
[FM ]for 2 seconds, until the red and blue lights
alternately blink, enter the Bluetooth waiting pairing
state, the phone search for the device Bluetooth name
"Shark", click connect to complete the pairing.
This Bluetooth connection method is practical for 120
seconds without Bluetooth pairing operation want to
connect again;
3.2
Pairing intercoms between two Bluetooth
intercoms
Place two Bluetooth intercoms of the same model within 1
meter of each other.
⑨
Pairing steps: 1) Turn on the two Bluetooth intercoms
(A, B), AB needs to enter the Bluetooth waiting pairing
state at the same time, red and blue lights flashing
alternately.
(2) short press the A intercom【on/off】, A becomes blue
light flashing fast, enter the intercom search mode;
successful connection AB blue light slow flashing, there
will be intercom has been connected to the beep.
Note: If the Bluetooth intercom (A, B) has been
connected to other Bluetooth devices, the indicator light
will show a slow flashing blue light, you need to first long
press【on/off】+[FM key]2 seconds operation, until the
red and blue lights alternately flashing, into the waiting
for the pairing state before the next pairing operation.
⑩
Attention.
(a) two Bluetooth headset in the intercom pairing success,
no need to repeatedly pair, turn off the phone and then turn
on again, intercom automatically connected.
(b) If the first pairing intercom success, but not yet
connected to the phone Bluetooth, long press【on/off】+[FM
key]2 seconds into the Bluetooth search for pairing phone
Bluetooth, complete the phone Bluetooth connection.
c) In the intercom process, environmental factors inevitably
disconnected, disconnected within 10 minutes will be
automatically connected back to the function, such as
beyond the automatic back to the time, manually long press
[multi-function]key once again back to the intercom.
d) When talking to each other, long press [multi-function]
key to terminate the conversation, and long press again to
connect back to the conversation.
3.3 Multi-mode intelligent mixed use
①When in two-person intercom, you can disconnect the
intercom by long-pressing [multi-function]key for 2 seconds,
and then short-press [multi-function]key for phone music
playback (already connected to the phone Bluetooth case), or
long-press the [FM key]for 2 seconds to open the FM radio.
Indice
