Hysolis Apollo 5K Manuale utente

User Manual

Apollo 5K

Portable Solar Power Station

Contents

1.0 Introduction ...........................1

2.0 Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

3.0 Initial Inspection. . . . . . . . . . . . . . . . . . . . . . .3

4.0 Product Features. . . . . . . . . . . . . . . . . . . . . 4

4.1 Top Panel .........................4

4.2 Front Panel . . . . . . . . . . . . . . . . . . . . . . . 4

4.3 Back Panel ....................... 5

4.4 Homepage UI Touchscreen ....... 6

5.0 Installation............................7

5.1 Overview ......................... 7

5.2 General Installation Guidelines 7

5.3 Single Unit Setup .................8

5.4 Multi-unit Setup. . . . . . . . . . . . . . . . . .13

5.5 EXB5K Expansion Batteries . . . . . . 23

6.0 Operation ...........................24

6.1 Power-on Options. . . . . . . . . . . . . . . . 24

6.2 Touchscreens ...................28

7.0 Product Care ........................38

8.0 Troubleshooting. . . . . . . . . . . . . . . . . . . . . 38

9.0 Technical Speciﬁcations .............40

10.0 Declarations ........................41

12VDC

MAX 30A

5V 2.4A

QC 3.0

PD60W

12VDC

ON/OFF

AC OUTPUT

25AMAX

AC OUTPU T MAX 20A

1.0 Introduction

Thank you very much for purchasing the

Hysolis Apollo-5K unit! We designed this product

to help grant you energy independence. We have

the utmost conﬁdence in this product’s

performance and quality. Please feel free to

questions. Enjoy using your Hysolis Apollo 5K,

and may it positively aect your future

endeavors!

The product has the following features:

• Dual-CPU Intelligent Control Technology manages energy input/output

• High-frequency pure sine wave output is clean and reliable for any load

• Wide input voltage range and consistent voltage output

• Three programmable working modes prioritize dierent energy needs:

• UPS mode: Utility Power ﬁrst, a.k.a. “Pass-through AC Power”

• AC Fast Charge (AC F.C.) mode: 120V AC power Fast Charge,

500W-3,000W programmable

• Battery First mode: The solar charges the battery and grid. AC Power is

only used if battery is almost empty.

• Intelligent MPPT solar controller features over-charge & over-discharge

protection, current limiting charging, and multiple other safety protections

• Battery over-voltage and low-voltage protection, overload protection, short

circuit protection, over-temperature and under-temperature protection.

• A 4.3” touchscreen shows real-time running statuses at-a-glance

• Remote monitoring & control

• Compact and modular unit design for portability

• Smart Fan Control keeps the unit cool, safe, and reliable

• Multiple output power supply (120VAC/3000W, 12VDC/600W, 5VDC/120W)

2.0 Safety

All personnel engaged with installation, use, or maintenance of this product

must read, and understand the information in this manual. Please contact

customer service if there are any questions before operating this product.

• Inserting foreign objects into any of the product’s port or ventilation holes

may cause an electrical shock and result in death or serious injury. Never

insert foreign objects into any of the product’s port or ventilation holes.

• Improper connections between the unit and the power source may result in

exposure to electricity and could result in death or serious injury. A licensed

electrician is required to install the Apollo5K as installation involves

connecting the wires from your home circuit breaker box to the Apollo5K Sub

Panel (Optional Purchase).

• Placement of the product near any heat sources may result in an explosion or

toxic fumes and could result in death or serious injury. Never place and

operate the product in an environment with ﬂammable, explosive gas, or

smoke.

• Operation of the product in wet conditions may conduct electricity and

expose people and animals to electric shock resulting in minor injury or

death. Always turn the power to the unit OFF if is operating in wet conditions.

Let the unit dry completely and ensure the unit is in a safe environment

before turning the power to the unit on.

WARNING

CAUTION

Only use a dry chemical powder ﬁre extinguishing agent if the product is

exposed to ﬂame or ﬁre. Using a wet chemical ﬁre extinguisher can conduct

electricity and cause an electric shock and may result in minor or moderate

injury as well as damage the product.

12VDC

MAX 30A

5V 2.4A

QC 3.0

PD60W

12VDC

ON/OFF

AC OUTPUT

25AMAX

AC OUTPU T MAX 20A

3.0 Initial Inspection

NOTICE

Inspect the product for damage during transit. Do not power the product ON.

Check the following items are in the box:

NOTICE

• Please ensure proper ventilation while in use and do not obstruct fan

openings. Inadequate ventilation may cause permanent damage to the

equipment.

• Vibrations and impacts during product operation may damage the unit and

lead to poor connectivity to the hardware inside. Do not move the product

during operation.

• Stack anything on top of the power station either in storage or while in use

may cause damage the product. Do not stack anything on the product.

• Replacement of the internal battery or any other components of product by

anyone other than authorized personnel may result in damage to the

product. Always have authorized personnel perform hardware maintenance.

• Applo-5K unit

• AC charging cable

• DC charging cable

• PV charging cable

• User Manual

Report any damage to the product to

the dealer and carrier. Contact

Hysolis customer service regarding

any missing items:

Phone: 1-858-308-2628

Email: suppor[email protected]

12VDC

MAX 30A

5V 2.4A

QC 3.0

PD60W

12VDC

ON/OFF

AC OUTPUT

25AMAX

AC OUTPUT MA X 20A

4.0 Product Features

Fig. 4.2 • Front panel of product

Fig. 4.1 Top view of product

4.2 Front Panel

2. 12VDC Output 5210

Sockets (MAX 2A)

3. 12VDC Output Anderson

Plug (MAX 30A)

4. 12VDC Output Cigarette

Lighter Socket

(MAX 10A)

5. 5VDC Output USB /

TYPE C Charger

6. 120V AC Output NEMA

5-20R outlets

(Max 20A)

7. 120V AC Output NEMA

TT-30R receptacle

8. Touchscreen

9. Power Switch

(for Battery BMS)

4.1 Top View

1. Wireless Charger

Note: The wireless

charger can be used

to charge compatible

electronic devices.

Fig. 4.3 • Back panel of product

4.3 Back Panel

10. 120V AC Input Port

LP-28 (MAX 30A)

11. Inverter Reset Switch

12. AC Output parallel

communication port

(For AC output parallel

set up)

13. Expansion Battery

Port 1

14. Solar Input Port

(Voc. Range

120VDC450VDC, Max.

4,000W/20A)

15. 12/24VDC Input Port

(Max. 10A)

16. AC Input Reset Switch

17. BMS Working Status

Indicator

18. BMS Reset Button

19. Expansion Battery

Port 2

BAT T ER Y 2

51.2VDC

BAT T ER Y 2

51.2VDC

RESET RUN ALM CHARGE

AC OUTPUT COMM.PORT

110V /1 20 V

MAX 35A

AC INPUT

WARNING!

COM1 COM2

DO NOT CON NECT DIFFERENT T YPE

OF BATTERY ! WRONG BATTERY MAY

DAMAGE THE WHOLE UNIT. THE

EXPANSI ON BATTERY PACK MUST

BE SUPPLIED BY THE ORIGINAL

MANUFACTURUR.

120V~450V DC

MAX 5000W

SOLAR INPUT

12V/ 24V

MA X 10A

DC INPUT

171819

4.4 Homepage UI Touchscreen

120VAC

Home

Settings

Data

Warnings

12VDC

AC Load

DC Load

11/15/XXXX 15:15

2560 W 2560 W

2500 W

120 W 330 W

AC ON

DC OFF

INV. RESTART

100%

a. Home Page

b. Settings Page

c. Data Page

d. Warnings Page

e. Battery Status

f. Bluetooth Status

g. PV (Solar) Information

h. Battery Information

i. Date & Time

j. AC Input Information

k. DC Input Information

l. Inverter Restart Switch

m. AC Output Information

n. AC Output Switch

o. DC Output Information

p. DC Output Switch

Fig. 4.4 • Homepage UI touchscreen

efgh i

j k l

5.0 Installation

Important! A licensed electrician is required to install the Apollo5K in any

hardwired fashion. An Apollo 5K Sub Panel (Optional Purchase) may be used in

the installation. For all conﬁgurations, please consider the rated amperages of

power sources, total loads, wires, and the Apollo 5K. Do not exceed limits.

The Apollo 5K has a neutral-ground bond. This is preferred for most o-grid

applications. Before connecting the load side of the Apollo to a separate

ground (e.g. directly supplying power to a home breaker panel) a licensed

technician must disconnect the Apollo’s ground-neutral bond.

BATTERY 2

51.2VDC

BATTERY 2

51.2VDC

RESET RUNAL M CH ARGE

AC OUTPUT COMM.P ORT

110V/120V

MAX 35A

AC INPUT

WARNING!

COM1 COM2

DO NOT CONNECT DIFFEREN T TYPE

OF BATTERY! WRONG BATTERY MAY

DAMAGE THE WHOLE UNIT. THE

EXPANSION BATTERY PACK MUST

BE SUPPLIED BY THE ORIGIN AL

MANUFACTURUR.

120V~450V DC

MAX 5000W

SOLAR INPUT

12V/24V

MAX 10A

DC INPUT

Fig. 5.1 Neutral-Ground Separated /

Floating Neutral: The Neutral wires to the

plastic pole

Fig. 5.2

Neutral-Ground Bonded (Factory

Default): The Neutral wires to the metal

structure

5.1 Overview

There are two installation options. These include Single Unit Setup and Multi-

unit Setup. The power sources for each option include:

120V AC input (i.e., utility power or generator)

DC input (i.e., automobile with DC output)

PV input (i.e., solar photovoltaic panels)

Both setups provide AC and DC output.

12VDC

MAX 30A

5V 2.4A

QC 3.0

PD60W

12VDC

ON/OFF

AC OUTPUT

25AMAX

AC OUTPUT MAX 20A

INPUT OUTPUT

5.2 General Installation Guidelines

The Apollo5K involves connecting the wires from your home circuit breaker box

to the Apollo5K Sub Panel (Optional Purchase). Installation must be performed

by a qualiﬁed technician.

During transport, the unit may have warmed or cooled outside of its working

temperature range. Moisture may have condensed on the unit. Ensure it is dry

and within the proper temperature range before using.

• Do not use the product in a wet or dusty environment.

• Do not use anything ﬂammable or explosive near the product.

• Do not cover or block the vents in the product.

• Maintain 10cm of clear space around the unit to have good heat dissipation

5.3 Single Unit Setup

This section provides information on setting up a single unit. It describes the

input requirements for AC, DC and PV (solar) power parameters and AC, DC

output parameters (Fig 5.3).

Fig. 5.3 120V AC input parameters

Utility

Loads

Generator

Vehicle

Altri manuali per Apollo 5K

Indice

Altri manuali Hysolis Alimentazione elettrica

Hysolis

Hysolis Apollo 5K Manuale utente

Manuali Alimentazione elettrica popolari di altre marche

Monacor

Monacor PS-12CCD Manuale utente

VOLTIMA

VOLTIMA MagicBox 15 Manuale utente

Agilent Technologies

Agilent Technologies 6032A Manuale utente

Miller

Miller Auto Deltaweld 452 Manuale utente

BCP

BCP PUOUBK Foglio di istruzioni

HC 2210 Manuale utente

Puls

Puls CT5.241 Manuale utente

OCZ

OCZ ZX1250W Manuale utente

iseg

iseg ECH 238 Manuale utente

Power

Power XXL A Series Manuale utente

Agilent Technologies

Agilent Technologies 6631B Manuale utente

Renogy

Renogy PHOENIX 300 Manuale utente

HP 6200B Manuale di servizio

Epson

Epson Stylus Scan 2500 Manuale operativo

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manuale utente

Puls

Puls MiniLine ML50.100 Manuale utente

Puls

Puls AS-Interface SLA4.100 Manuale utente

Kenwood

Kenwood PS-60 Manuale utente