Hyundai Fingercam Manuale utente

HYUNDAIFingercam

User Manual

1. Structure Detail

I Characters of Product

zIt has small contou

desi

n, which does UV

spra

finishin

the whole bod

.Itisver

fashionable and wearable and matches

with all kinds o

portable tools.

zSupports PC camera and chattin

function

zSupports AVI video format

zIt can carr

out hi

h definition ima

recordin

unde

low illumination

zSupports 30 fps fo

720*480 video shoot

and output

zSupports USB1.1 and USB2.0

zSupports 16 GB T-flash card

(

maximum

)

zBuild-in lithium batter

which can make a

video more than two hours, the standb

time is up to 250 hours

II Operation Guide

1. Char

The batter

is built-in lithium rechar

eable batter

,so

when

ou use it the first time, please char

efirstl

.The

method fo

char

as followin

)

Connect computer: use USB cable to connect the

computer, then it can be char

ed.

)

Use adaptor: connect char

plu

with USB cable,

then plu

into electrical connecto

receptacle, it can be

char

ed.

Notice: when batter

powe

is not enou

h, Fin

ercam

will ente

into protection mode, so it cannot be turn on.

Please char

efo

it now.

2.Powerontovideo

Press powe

button sli

htl

, blue indicato

ht be

ins

to bri

ht, now it enters into startup read

mode, which

can ente

into standb

mode quickl

. Press record/

stop button sli

htl

,blueindicato

ht be

ins to bri

ht,

red indicato

ht starts to flash slowl

. At this time, it

ins to make a video. The resolution fo

video file is

720*480, and frame numbe

is 29-30fps/s. Then short

press record/ stop button, video is stopped and saved

automaticall

. Afte

savin

the red indicato

remains li

ht. I

ou need to continue to video, please

press record/ stop button sli

htl

once more.

Notice:

a. Please make sure T-flash

(

Micro SD

)

card has

been inserted, i

not, it will be powe

automaticall

afte

30 seconds.

b. The maximum capacit

T-flashcardis16GB.

c. Savin

file needs certain time, so please don’t

press operation button continuousl

in orde

to avoid

savin

unsmoothl

and

eneratin

incomplete file.

d. When

ou make a video, please focus on the

ect and keep 50 cm unde

sufficient illumination.

Then the video will be ri

ht, natural color, clea

and

stable.

3. Sound control video

(

optional

)

Press powe

button sli

htl

, blue indicato

ht be

ins

to bri

ht, now it enters into startup read

mode, which

can ente

into standb

mode quickl

.Atthattime,

press MODE button sli

htl

, and then

ou can switch

into sound control video mode. Now blue indicato

alwa

sbri

hts, red indicato

ht flash quickl

(

indicate

sound control standb

mode

)

. When decibel o

video is

more than 60, then it will be video automaticall

.Atthe

moment, blue indicato

ht alwa

sbri

hts, red

indicato

ht flash slowl

(

Indicate unde

sound

control video

)

When sound control starts, the shortest shoot time is 2

minutes. Afte

2minutes,i

thereisnoan

sound, the

Fin

ercam will save file automaticall

and switch into

standb

mode. I

there still has sound afte

2minutes,

the Fin

ercam will continue to shoot.

4．Power of

Unde

video mode o

standb

mode, please lon

press

powe

button 3 seconds, then release till indicato

oes

out. Then the machine is turned off.

5. Auto-power of

function

The Fin

ercam will save file and turn of

automaticall

as followin

a. When

ou shoot video without enou

hpower,

file will be saved automaticall

, then auto-powe

off.

b. When disk space o

the Fin

ercam is not

enou

h, afte

indicato

oes out immediatel

, file will

be saved automaticall

then auto-powe

off.

c. Unde

standb

mode, without an

operation in

45 seconds, it will be auto-powe

off.

6．Connecting computer

It can connects compute

unde

powe

mode,

standb

mode o

video mode, afte

that which can be

used as U disk, who can cop

, cut and paste, delete

file.

When

ou connect it with USB port, a portable disk

mar

will be seen afte

several seconds. Red indicato

ht alwa

sbri

hts, blue indicato

ht will be from

flashed quickl

to alwa

sbri

hts.

Notice:

a. When

ou connect computer, i

the machine

cannot be identified, o

not see the portable U dis

mar

in 30 seconds, please insert it a

ain.

b. It is bette

cop

cut video file into compute

hardware then pla

. Video file which is saved in the

machine is pla

ed directl

will cause unsmooth pla

the reason is that

antic data cannot be transmitted

nchronousl

7. PC Camera

When

ou first use PC camera, please install driver.

The drive

name is SPCA1528_V2220_M…Setup.exe,

whichisplacedinattachedCD.When

ou install

please double press this document, and as pe

uide

to do. Afte

that there will be an AMCAP icon on the

compute

desk.

Unde

powe

on mode, use USB cable to

connect computer, the mode is U dis

mode. Then

short press MODE button, at this moment it can be

switched into PC camera mode. Then double press

AMCAP icon can be used as PC camera.

8．Reset

When machine works abnormal fo

ille

al operation o

othe

unknown reasons, it needs to be reset. The

specific operation method as followin

Use slim pole to press the reset button, and then finish

one reset operation.

9. Char

Three times before char

to char

emorethan12

hours, make the batter

to achieve maximum

efficienc

Start char

, red indicato

ht often bri

ht and blue

indicato

ht flashin

slowl

. When char

3~4

hours continuousl

full

char

ed blue indicato

ht are

often bri

ht.

10. Notice

Suitable usin

situation: Please follow State's law.

Do not use it ille

all

Work temperature: Please use it unde

normal

temperature and avoid usin

unde

unsuitable bod

temperature.

Work humidit

:Please use it unde

reeable human

atmosphere humidit

. Please don’t make the product

wet o

exposeinrainfo

which without waterproo

function.

Shootin

illumination: Please use it unde

enou

ht sources; do not aim the camera at the sun and

othe

stron

ht sources in orde

not to dama

optical parts o

an apparatus.

Cleanin

requirements: Please don’t use the product

unde

too lar

e dust densit

atmosphere so as not to

affect video effects fo

tainted lens and othe

parts.

Waste treatment: Please pa

attention to protect

environment, not to throw the product optionall

.In

orde

to avoid explosion, please not throw product into

fire.

Please don’t film and take pictures o

othe

persons

without thei

permission.

more information please visit www.m

-h

undai.de

HYUNDAI MC1010 Mini video camera II Using your HYUNDAI MC1010 mini video camera

Operating instructions 1. Charging the attery

Charge the battery fully before using the camera for the first time.

I Description of your Hyundai MC1010 mini video camera

Connect the camera to your computer using the USB cable -

this will begin charging the battery.

Supports AVI Video Format. Do not overcharge the battery –

High Definition recordings/photos can also be taken in disconnect the camera from the computer after two hours.

poor light conditions with 30 fps at 720*480

Supports USB1.1 und USB2.0.,

Memory ard slot for a 16GB Micro SD card (maximum)

The camera turns off automatically if the battery charge is too low.

It will only turn on again after a complete charge.

II Using your HYUNDAI MC1010 mini video camera

2. Setting the video function

ress the on/off button. The yellow light will illuminate and the camera is now in standby mode. ress the "Change mode" button. The yellow light will flash three times and go out.

Video recording will start from this moment. To stop video recording: press the "Change Mode" button again and the yellow light will illuminate. Video recording has now stopped. To start recording again

follow the steps as described above. Remember: a. Make sure that the Micro SD card is inserted, otherwise the camera will automatically turn off after 15 seconds.

b. The maximum supported Micro SD card capacity is 16GB.

c. Saving data may take some time. Therefore do not press any button during this time or data may be lost.

3. Photo function

ress the "On/Off" button. The yellow light will illuminate. The camera is now in start mode. Now press the "Change Mode" button briefly. The yellow light flashes to show that a photo has been taken. ress

the button again to take another photo.

4. Turning off & automatic shutdown:

Hold the On/Off button until the status light goes out. The HYUNDAI MCM1010 is now tu ned off.

The HYUNDAI MC1010 will shut down automatically in the following ci cumstances: a. If the batte y is low. The HYUNDAI MCM1010 mini video came a will stop the cu ent

eco ding and save it automatically.

b. If the e is not enough sto age space on the memo y ca d to continue. The HYUNDAI

MC1010 will then save the eco ding automatically and shut down.

c. If the came a is in "Standby Mode". The came a will shut down automatically afte a

pe iod of inactivity longe than app oximately 45 seconds.

5. Playback

To play back you eco dings, connect the came a to you compute using the USB cable included. The came a will be ecognised automatically th ough Plug & Play and the

di ecto y will appea . This is whe e all you films and photos have been saved.

III Faults

Should the came a develop a fault, e.g. the light is continually illuminated and the came a will not tu n off, emove the memo y ca d and p ess the "Reset" button on the left

side of the casing with a pape clip o needle. Replace the Mic o SD ca d and tu n the came a on again. The "Reset" button is located between the USB output and the memo y