I-O DATA HDC-UXW Series Manuale utente

●ExampleforWindowsXP

●ExampleforWindows2000

B-MANU200694-01

HDC-UXWSeries

SetupGuideforWindows

IfyouconnectthedrivetothecomputerwitheSATAcable

IfyouconnectthedrivetothecomputerwithUSBcable

IfyouhaveconnectedthedrivetothecomputerwitheSATAcableIfyouhaveconnectedthedrivetothecomputerwithUSBcable

Connecttothecomputer

Conﬁrmation

Conﬁrmthattheiconfortheharddiskhasbeenaddedin[MyComputer].

Clickontheiconofthisdrive.

Ifmultipleremovabledevicesareconnected,please

makejudgmentaccordingtothemessageofdrive.

Conﬁrmthemessage(clickon[OK]).

Removethedrive.

Clickonthe[RemovableTool]

inTaskTray.

Clickonthe[SATAUnplug]iconinTaskTray.

Conﬁrmthemessage.

Removethedrive.

●NoticetheDirectionofConnector

Thedirectionofaconnectorforconnectionisﬁxed.

In case of feeling diﬃcult to make connection, never

force to do it, please make sure the direction of the

connector. If you intend to force to make connection

withawrongdirection,thecableorportshallpossibly

bedamaged.

●IfNoIconfortheDriveshown

■Pleasemakesuretheconnectionofthedrive.

■PleaseconnecttoanotherUSBport.

IfthedriveisconnectedtoUSBhub,pleaseconnect

tocomputersUSBport.

■Pleaseclickon[View]→[Refresh]in[MyComputer.]

Incaseof

WindowsXP

Incaseof

Windows2000/Me/98

Theseareicons

ThemessagedisplayedinthescreenshallbediﬀerentbasedondiﬀerentversionsofWindows.

However,theoperationprocedureissame,pleaseproceedasusual.

【Remove】

Click

TheMessage[Thedevicexxxxxxxxxxxxcannotbestopped・・・・]IsDisplayed.

ClickingontheSATAUnplugIcon,StilltheDriveCannotBeDisplayed.

Closeallthesoftwareyouareusing,andproceedtoremovethedrive.

The SATAUnplug does not support the SATA Host Controller of the computer. Please turn oﬀ the power

supplyofthecomputerandproceedtoremovethedrive.

WhenYouMeetFollowingCases…

ItisnecessarytoinstallthedriveUnplug

Utilitytoremovethedriveifthepowersupply

ofthecomputerison.

※IfyouhavenotinstalledthedriveUnplugUtility,oroperateina

non-supportenvironment,pleaseturnoﬀthepowersupplyof

thecomputerandremovethedrive.

NoticeforUseoftheDrive

●Whenremovingacable,pleasedonotholdthecableportion,butholdtheconnector.

●Basedonthecombinationwithcomputer,sometimesyoumaynotbeallowed

tousepower-savingfunctionssuchasstandby,rest,sleep,suspend,andresume.

●Pleasedonotinstallapplicationinthedriveexceptthatthedriveisusedasabootabledrive.

●PleasenoticethefollowingwhenconnectingwithUSBandusingotherUSBdevices:

●TheOScannotbebootedfromthedrivewhenusingUSBcable.

●BecauseWindowsandMacOS,exceptMacOSX10.4,havediﬀerentformattings,youcannot

usethedriveunderbothoftheseoperatingsystemsatthesametime.

Becauseoftheprogramsexecutedduringthestart-upofOSnotbeingfoundandotherreasons,youmaynotusesomesoftware

suchasword-processingsoftwareandgamesoftwarenormally.

■Datatransferspeedofthedrivemaybecomeslower.

■IfbeingconnectedtoUSBhub,thedrivemaynotbeuseable.Insuchcase,pleaseconnectthedrivetocomputer'sUSBport.

※Ifthesamemessageisdisplayedagain,pleaseturnoﬀthepowersupplyofthecomputerandremovethedrive.

Clickonthedisplayedmessage

[Safelyremove……drive(ｘ：)].

Click

※ThedisplayedmessagedependsontheOSyouareusing.

AboutFormatOperationoftheDrive

ThisdriveisalreadyformattedinfactoryasonepartitionandFAT32touseWindows.Besides,thedrive

canalsobeusedafterreinitializedwithNTFSformattingunderWindowsXP/2000.

However,ifusingthedriveunderMacOSX,youneedtoinitialize.Fordetails,pleaserefertotheSetup

GuideforMacOS.

NTFSFormat

■AdvantageofNTFSformatting

・SuitabletoWindowsXP/2000andHardDiskcanbeusedeﬀectively.

・Suitabletosavelargeﬁlesize.InFAT32,themaximumsizeofaﬁlecanonly

belessthan4GB.

・Thereisnolimitationtothenumberofsavedﬁles.InFAT32,thenumberofﬁles

inafolderislimited.

■NoticeforNTFSformatting

・OnceinitializedwithNTFSformatting,thedriveshallnotbeusedunderMacOSX.

FollowingisanexampleofconnectingeSATAbrackettotheSATAportinsidethecomputer.If

SATAportisavailableinthecomputer,youdonotneedtohaveaneSATAbracket.

（PleaseremovethedrivewhenyouinstalltheUnplugUtility.）

Installation

InserttheSupportSoftwareCDintoCD-ROMdrive.

TheMenushallbedisplayedautomatically.

Clickon[Install].

TheinstallationoftheUtilityshallbestarted.Pleasefollowtheinstructionsonthescreen.

YoucanuseSATAUnplugwhenyouremovethedriveconnectedwitheSATAcabletothecomputer.

AttachedSupportSoftwareforWindows

YoucanmakeinstallationfromtheMenuofSupportSoftware.

※PleaselogonasthecomputeradministratortoinstallifyouuseWindowsXP/2000.

HardDisk

FAT32Formatter

Itisasoftwarewhichresetsthedriveformattofactorydefault(onepartition,FAT32).

※PleaselogonasthecomputeradministratortouseHardDiskFAT32Formatter.

※ThedrivemustbeconnectedtothecomputerwithUSBcablewhenyouuseHardDiskFAT32Formatter.

UnplugUtility

SATAUnplug

SupportWindowsXP/2000Only

Itisasoftwarewhichenablesthedrivetoremovefromthecomputerwhilethepower

supplyofthecomputerisonandthedriveisconnectedtothecomputerwitheSATA

cable.

※IncaseeSATAbrocketisinconnected,pleaseusethissoftwareunderAHCImodeofIntel910,915,925,945,

955,965and975chipsets.

SoftwareName Features

HowtoreadOnlineManual

①InserttheSupportSoftwareCDintoCD-ROMdrive.

②Clickonthedisplayed[OnlineManual]button.

ACAdaptor

PowerCable

２

３

６

７

４１

InstallthedriveUnplugUtility.

Fortheinstallation,pleasereferto[3Installation].

Disconnectthepowersupplyofthecomputer,andconnecteSATA

bracketasshownin andintheﬁgure.

３Connectpowersupplyofthecomputer,

andmakeconnectionfrom to as

shownintheﬁgure.

※ThePOWER/ACCESSlampofthisdriveshallbe

bluewhilebeingon.

1Connectthepowersupplyofthecomputer

asshownintheﬁgure.

※ThePOWER/ACCESSlampofthisdriveshallbeblue

whilebeingon.

１2

ACAdaptor

PowerCable

USBCable

ConnecttoUSBPort

Notice

Reference

３InstalltheUnplugUtilitySATAUnplug.

(NOTE)Powercableisvariedbasedonthecountry.

eSATACable

HDC-UXWSeries

SetupGuideforMacOS

Connecttothecomputer

１

IfyouconnectthedrivetothecomputerwithUSBcable

Uncheck[FileExchange](remove[×]).

Clickon[Restart]button.

Open[ExtensionsManager].

Clickon→[ControlPanels]→[ExtensionsManager].

IfyouconnectthedrivetothecomputerwitheSATAcable

AboutOnlineManual

UseunderMacOS10.4withFAT32

Thereistheinformationsuchas[Troubleshooting]init.

NoticeforUseoftheDrive

●Whenremovingacable,pleasedonotholdthecableportion,butholdtheconnector.

●Basedonthecombinationwithcomputer,sometimesyoumaynotbeallowed

tousepower-savingfunctionssuchasstandby,rest,sleep,suspend,andresume.

●Pleasedonotinstallappricationsoftwaretothedrive.

●PleasenoticethefollowingincaseofusingotherUSBdevices.

●TheOScannotbebootedfromthedrive.

●BecauseWindowsandMacOS,exceptMacOSX10.4havediﬀerentformattings,youcannot

usethedriveunderbothoftheseoperatingsystemsatthesametime.

●IncaseofcopyingﬁlesunderMacOSX,pleasenoticethediﬀerencebetweenﬁlesystems.

●Itisrecommendedtousethedrivewithonepartition.

Becauseoftheprogramsexecutedduringthestart-upofOSnotbeingfoundandotherreasons,youmaynotusesomesoftware

suchasword-processingsoftwareandgamesoftwarenormally.

■Datatransferspeedofthedrivemaybecomeslower.

■IfbeingconnectedtoUSBhub,thedrivemaynotbeuseable.Insuchcase,pleaseconnectthedriveto

computer'sUSBport.

■ThemaximunsizeoftheﬁleswithFAT32islessthan4GB.

■Ittakessometimetomountthedrive.

■IncaseofusingthedriveundertheMacOSotherthanMacOSX10.4,youcannotusethedrivewithFAT32.

■IncaseofusingthedriveonlyunderMacOS,itisrecommendedtousethedrivewithMacOSExtendedformatting.

Fortheformattingprocedure,pleaserefertoOnlineManualintheSupportSoftware:[InitializationunderMacOSX]-[OSX10.4].

Ifﬁlesystemsinthesourceandinthedestinationincopyoperationarediﬀerent,errormayoccur.

Insuchcase,pleasechangetheﬁlename(text,numberofletters).Itisrecommendedtousethedriveafterhaving

initializingitwithMacOSExtened(Journaled)formatting.

DragthevolumeforthedriveintotheTrash.

InserttheSupportSoftware,thecontentsofSupportSoftwareshallbeautomaticallydisplayed.

※Ifitbeingnotdisplayed,pleasedoubleclickon[HDCUXWxxx]toopenit.

Pleaseopen[manual.htm].

Removethedrive.

【Remove】

Discardthevolume

（MacOSX）（MacOS9）

●Youcanusethedrivedirectlywithitsfactorydefaultfarmatting(FAT32),butneed

tonoticethefollowingmatters:

Sometimesfollowingscreenmaybedisplayedafterthe

initialization.Pleaseclickon[Continue]button.

fterthescreenhasbeendisplayedforawhile,itshallsoondisappear.

InthiscasepleaseonceremovetheUSBcablefromthecomputerand

theninsertitagain.

※ThescreenisanexampleforMacOSX10.3

Initialization

Conﬁrmation

MacOSX10.1〜10.3

Selectthisdrive(I-ODATAHDC-UXMedia).

MacOS9.1〜9.2.2

Conﬁrmthattheiconfortheharddiskhasbeenadded.

Typethenameforthedrivein[Name].

Set[Format]as[MacOSExtended].

Clickon[Initialize]button.

Thenfollowtheinstructionsonthescreen.

Check[FileExchange](markedwith[×]).

Clickon[Partition]tab.

Settingsofinitialization.

■volumescheme:1partition

■Format:MacOSExtended(Journaled)

Clickon[Partition(OK)]button.

Clickon[Partition]button.

Initializationisstarted.

TheDriveIsNotDisplayed

●Itmaytakesometimetodisplaythedrive.

Pleasewaitforawhile.

MacOSX MacOS9

（Incaseofconnecting

witheSATAcable）

In case that the icon is not be displayed and

the lamp is not on, please try to pull out the

USB cable connected to the computer and

insertitintothecomputeragain.

WhenYouMeetFollowingCases…

Startup[DiskUtility].

Open[StartupVolume]→[Applications]→[Utilities]→[DiskUtility].

MacOSX10.4

Thedriveisalreadyformattedinfactory(onepartition,FAT32).

Itcanbeuseddirectly,butifitisonlyusedunderMacOSX,wesuggestmakinginitialization(formatting)

forit.

●Ifyoumakeinitializationforthedrive,makeinitializationwithMacOSExtended(Journaled).

Formoredetailedprocedure,pleaserefertoOnlineManual:[InitializationunderMacOSX]-[OSX10.4].

●Ifyouusedrivewithfactorydefaultformatting(FAT32),

pleaseread[UseunderMacOS10.4withFAT32].

Utilizing100%post-consumer

recycledpaperpulp

ACAdaptor

PowerCable

●NoticetheDirectionofConnector

The direction of a connector for connection is ﬁxed. In case of feeling

diﬃculttomakeconnection,neverforcetodoit,pleasemake sure the

direction of the connector. If you intend to force to make connection

withawrongdirection,thecableorportshallpossiblybedamaged.

Connectthepowersupplyofthe

computer,andconnectthedriveto

computer'sUSBportasshowninthe

ﬁgure.

ThePOWER/ACCESSlampofthisdriveshallbeblue

whilebeingon.

3ForselectionofthisdrivefromDiskUtility,clickon[File]-[MountVolume].

DisconnectthepowersupplyofthecomputerandconnecttheeSATAbracketasshownin

andintheﬁgure.

Connectthepowersupplyofthecomputer,andmakeconnectionasshownintheﬁgure.

※ThePOWER/ACCESSlampofthisdriveshallbebluewhilebeingon.

Notice

Reference

FirstStepforMacOS9

Click

Reference

Theseareicons

Referto[FirstStepforMacOS9]

eSATACable

ACAdaptor

Connectto

USBPort

PowerCable

USBCable

(NOTE)Powercableisvariedbasedonthecountry.

Altri manuali I-O DATA Magazzinaggio

I-O DATA

I-O DATA HDC-UXW Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente