i-See IGEPv2 BOARD Guida rapida per l'utente
ISEE
IGEPv2
BOARD
ISEE (
Integration Software & Electronics Engineering
)
Address: C/Vallespir nº19 Planta 1 odulo 1
Post Code: 08224
City: Sant Cugat
Country: SPAIN
Phone: +34.93.576.39.31
http://www.iseebcn.com
http://www.igep.es
IGEPv2 BOARD
Hardware Reference anual
(Revision 1.20 1/10/2010)
IGEPv2 BOARD HARDWARE USER ANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCU ENT FRO ISEE 2007 S.L. AN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
2
CONTENTS
1
COPYRIGHT NOTICE ................................................................................ 5
2
WARRANTY ............................................................................................. 5
3
ISEE IGEPv2 BOARD FEATURES ................................................................ 7
3.1
ISEE IGEPv2 BOARD GENERAL SPECIFICATIONS ................................... 9
3.2
SYSTE BLOCK DIAGRA ................................................................. 15
3.2.1
IGEPv2 Revision B board series block diagram ............................... 15
3.2.2
IGEPv2 Revision C board series block diagram ............................... 16
3.2.3
IGEPv2 Revision C board series improvements ............................... 17
3.3
GENERAL VIEW ................................................................................ 18
3.3.1
IGEPv2 Revision B board series view ............................................ 18
3.3.2
IGEPv2 Revision C board series view ............................................ 19
3.4
ECHANICAL SPECIFICATION ............................................................ 20
3.4.1
IGEPv2 Revision B board series mechanical ................................... 20
3.4.2
IGEPv2 Revision C board series mechanical ................................... 21
3.5
ELECTRICAL SPECIFICATIONS ........................................................... 22
4
WIFI/BLUETOOTH INTERFACE .................................................................. 24
4.1
BLOCK DIAGRA .............................................................................. 24
4.2
INTERFACES .................................................................................... 24
4.3
Power-on Reset Sequence for WLAN ................................................... 25
4.4
WLAN RESET/PDN PINS .................................................................... 26
4.5
BLUETOOTH RESET PINS ................................................................... 26
4.6
PC INTERFACE ............................................................................... 26
4.6.1
TPS65950 SIDE ......................................................................... 26
4.6.2
WIFI ODULE SIDE .................................................................... 27
5
CONNECTORS DESCRIPTION ................................................................... 28
IGEPv2 BOARD HARDWARE USER ANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCU ENT FRO ISEE 2007 S.L. AN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
3
5.1
CONNECTOR J200: AIN 5.0VCC POWER ............................................ 29
5.2
CONNECTOR J400: JTAG DEBUG ........................................................ 29
5.3
CONNECTOR J940: POWER + RS485 .................................................. 31
5.4
CONNECTOR J960: SERIAL PORT DEBUG (+ EXTRA RS232) .................. 33
5.5
CONNECTOR J971: KEYBOARD ATRIX 4x4 ......................................... 37
5.6
TFT CONNECTORS: JA41-JA42 ........................................................... 39
5.6.1
CONNECTOR JA41 ...................................................................... 39
5.6.2
CONNECTOR JA42 ...................................................................... 43
5.6.3
CONNECTOR JA41-JA42 COUNTERPART ........................................ 44
5.7
CONNECTOR J990: GPIO ................................................................... 45
5.8
IGEPv2 ANTENNAS (INTERNAL/EXTERNAL - UD11, JD21, JD22) ............. 50
5.9
CONNECTOR JC20/JC21: ANALOG TO DIGITAL CONVERTER .................. 54
5.10
CONNECTOR JC30: CA ERA CONNECTOR ........................................ 56
5.11
S_VIDEO SIGNALS (TP400 and TP401) ............................................ 59
5.12
RTC BACKUP BATTERY ................................................................... 60
6
BOARD REFERENCE ................................................................................ 63
7
LIST OF FIGURES ................................................................................... 64
8
CHANGELOG .......................................................................................... 67
IGEPv2 BOARD HARDWARE USER ANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCU ENT FRO ISEE 2007 S.L. AN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
4
VERSION CONTROL
VERSION DATE ORIGIN DESCRIPTION
1.00 19/03/2009
R&D Initial version
1.02 20/05/2009
R&D Board Configuration update.
1.10 24/0 /2009
R&D Update Hw Revision RB
1.11 21/09/2009
R&D Document Update
1.12 24/09/2009
R&D Document Update
1.13 23/10/2009
R&D Document Update
1.14 18/11/2009
R&D Document Update
1.15 9/03/2010
R&D Update Hw Revision RC
1.16 15/05/2010
R&D Document Update
1.1 6/0 /2010
R&D Document Update
1.18 9/0 /2010 R&D Document Update
1.19 31/08/10 R&D Document Update
IGEPv2 BOARD HARDWARE USER ANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCU ENT FRO ISEE 2007 S.L. AN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
5
1COPYRIGHT NOTICE
This document is copyrighted, 2009, by ISEE 2007 SL. All rights are reserved. ISEE
reserves the right to make improvements to the products described in this manual
at any time without notice. No part of this manual may be reproduced, copied,
translated or transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this manual is
intended to be accurate and reliable. However, the original manufacturer assumes
no responsibility for its use, nor for any infringements upon the rights of third
parties which may result from its use.
2WARRANTY
Should this evaluation board/kit not meet the specifications indicated in the User’s
Guide, the board/kit may be returned within 30 days from the date of delivery for a
full refund.
THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY
SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
The user assumes all responsibility and liability for proper and safe handling of the
goods. Further, the user indemnifies ISEE 2007 SL from all claims arising from the
handling or use of the goods. Due to the open construction of the product, it is the
user’s responsibility to take any and all appropriate precautions with regard to
electrostatic discharge.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER
PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
ISEE 2007 SL currently deals with a variety of customers for products, and
therefore our arrangement with the user is not exclusive. ISEE assumes no liability
for applications assistance, customer product design, software performance, or
infringement of patents or services described herein.
Please read specifically, the Warnings and Restrictions notice in this manual prior to
handling the product. This notice contains important safety information about
temperatures and voltages. For additional information on IGEPV2 environmental
and/or safety programs, please contact with ISEE (support@iseebcn.com).
IGEPv2 BOARD HARDWARE USER ANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCU ENT FRO ISEE 2007 S.L. AN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
6
No license is granted under any patent right or other intellectual property right of
ISEE covering or relating to any machine, process, or combination in which such
ISEE products or services might be or are used.
WARRANTY: IGEPV2 i warranted again t defect in material and
workman hip for a period of 1 year from purcha e. Thi warranty doe not
cover any problem occurring a a re ult of improper u e, modification ,
expo ure to water, exce ive voltage , abu e, or accident . All board will
be returned via tandard mail if an i ue i found. If no i ue i found or
expre return i needed, the cu tomer will pay all hipping co t .
ISEE IGEP platform web site: http://www.igep.es
ISEE IGEP wiki: http://labs.igep.es
ISEE shop: http://shop.igep.es or https://shop.igep.es
ISEE Software Repositories: http://git.igep.es
IGEPv2 BOARD HARDWARE USER ANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCU ENT FRO ISEE 2007 S.L. AN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
7
3ISEE IGEPV2 BOARD FEATURES
De cription Characteri tic
Proce or O AP3530 (AR Cortex-A8)
Proce or Speed 720 hz
Memory SDRAM 512 Bytes LPDDR SDRA – 200 hz
Nand Fla h 512 bytes
DSP T S320D 64+
DSP Speed 430 hz
Video 3D Accelerator PowerVR SGX 530
Power Management TPS65950
Debug Console RS232 + JTAG Interface
IGEPv2 BOARD HARDWARE USER ANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCU ENT FRO ISEE 2007 S.L. AN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
8
PCB ize 93 x 65 x 1.6 mm
Indicator 2 Bicolor USER LEDS
USB 2.0 LS/FS/HS OTG 1 ini AB USB socket connector (dual slave and host role)
USB 2.0 HS HOST 1 Type A USB socket connector (standard USB host)
Audio tereo in/out 3.5mm standard stereo audio jack
microSD microSD connector (SD and SDHC cards supported)
DVI video output DVI-D using HD I connector. (video and TS lines are
available in expansion connector also).
Power 5Vcc / 1A
3.5mm socket connector for wall plug or JST Connector
Expan ion connector Power 5V and 1.8V, UART, cBSP, cSPI, I2C, GPIO,
RS485 with transceiver, Keyboard.
Wifi IEEE 802.11b/g 2,4GHz
Bluetooth 2.0
Antenna WiFi/Bluetooth 1 shared internal antenna (integrated on PCB)
Ethernet 10/100 B BaseT (RJ45 connector with led link/activity)
Temperature Range Commercial ( 0 to 70 Cº) and Industrial range (-40 to
+80 Cº Degrees) are available (Contact ISEE ale )
WARNING: IGEPv2 BOARD CAN ONLY BE POWERED WITH 5V DC
POWER SUPPLY OR THE BOARD WILL BE DAMAGED!
The following sections provide more detail on each feature and components on the
IGEPv2 BOARD.
IGEPv2 BOARD HARDWARE USER ANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCU ENT FRO ISEE 2007 S.L. AN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
9
3.1 ISEE IGEPV2 BOARD GENERAL SPECIFICATIONS
OMAP Proce or
The IGEPv2 BOARD uses the O AP3530 version ES3.1 and comes in a 0.4mm pitch
memory POP package on it.
POP (Package on Package) is a technique where the memory, NAND and SDRA ,
are mounted on top of the O AP3530. For this reason, when looking at the IGEPv2
BOARD, you will not find an actual part labeled O AP3530.
Figure 1 POP Package
Memory
The memory is mounted on top of the processor as mentioned. The key function of
the POP memory is to provide:
•4Gb NAND x 16 (512 B)
•4Gb LP-DDR SDRA x32 (512 B @ 200 Hz)
Power Management
The TPS65950 is used on the board to provide power to the IGEPv2 Board with the
exception of the 3.3V regulator which is used to provide power to the DVI-D
encoder and RS232 driver. In addition to the power it also provides:
•Stereo Audio Out
•Stereo Audio in
•Power on reset
•USB OTG PHY
•Status LED
IGEPv2 BOARD HARDWARE USER ANUAL v1.20
ISEE 2007 SL. All rights reserved, IGEP® is a registered trademark from ISEE 2007 SL. The following is
provided for informational purposes only.
DOCU ENT FRO ISEE 2007 S.L. AN-PR-IGEP.0020-001.20.HW_RC 10/1/2010
10
USB 2.0 LS/FS/HS OTG
On the board a single USB 2.0 OTG Port is
provided.
Figure 2 USB OTG connector
It is not possible to power the board with the OTG connector.
USB 2.0 HS HOST
On the board a single USB 2.0 HS HOST only one port is provided via a USB Type A
socket connector. Hardware provides power on/off switch control and up to 500mA
of current limit at 5V.
Figure 3 USB HOST connector
USB HOST Port supports only high speed devices (USB 2.0
HS devices). In order to support low speed devices (USB 1.0
LS devices) or full speed devices (USB 1.1 FS devices), external USB 2.0 HUB must
be used.
WIFI
IEEE802.11b/g compliant.
Chipset based on arvell 88W8686. The 88W8686 integrates a RF transceiver
operating at 2.4GHz, a physical layer, a media access controller, and an AR
processor into a single die.
BLUETOOTH
Bluetooth 2.0 compliant.
Class 2, 2.5 mW (4 dBm) ~10 meters
Version 2.0 + EDR 3 bit/s
ETHERNET
A RJ45 connector is provided for the Ethernet Auto- DIX Full Duplex 10/100 Base T
interface.
There is a EEPRO (U830) memory for AC configuration (Not populated).
NOTE: Contact ISEE sales for custom assembly boards.
Altri manuali per IGEPv2 BOARD
2
Indice
Altri manuali i-See Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
