IBA IbaRackline-PC CAM Manuale utente

ibaRackline-PC CAM/HD

iba Industrial Computer

Manual

Issue 1.1

Manufacturer

iba AG

Königswarterstr. 44

90762 Fürth

Germany

Contacts

Main office +49 911 97282-0

Fax +49 911 97282-33

Support +49 911 97282-14

Engineering +49 911 97282-13

E-Mail: iba@iba-ag.com

Web: www.iba-ag.com

This manual must not be circulated or copied, or its contents utilized and disseminated,

without our express written permission. Any breach or infringement of this provision will

result in liability for damages.

The content of this publication has been checked for compliance with the described

hardware and software. Nevertheless, deviations cannot be excluded completely so

that the full compliance is not guaranteed. However, the information in this publication

is updated regularly. Required corrections are contained in the following regulations or

can be downloaded on the Internet.

The current version is available for download on our web site http://www.iba-ag.com.

Windows® is a label and registered trademark of the Microsoft Corporation. Other

product and company names mentioned in this manual can be labels or registered

trademarks of the corresponding owners.

Certification

The device is certified according to the European standards and directives. This device

corresponds to the general safety and health requirements. Further international cus-

tomary standards and directives have been observed.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual may cause harmful interference to radio

communications. Operation of this equipment in residential area is likely to cause harmfulinterference in which case the

user will be required to correct the interference at his own expense.

Issue

Date

Revision

Chapter

Author

Version HW /

V 1.1

08/05/2020

New motherboard

ibaRackline-PC CAM/HD Manual

Issue 1.1 3

Table of contents

1About this manual...........................................................................................5

1.1 Targ et group.................................................................................................. 5

1.2 Designations ................................................................................................. 5

1.3 Symbols used................................................................................................ 6

2Scope of delivery.............................................................................................7

3Versions ...........................................................................................................8

3.1 Factory setting............................................................................................... 8

4Safety instructions ..........................................................................................9

4.1 Designated use ............................................................................................. 9

4.2 Proper installation site ................................................................................... 9

5Description ....................................................................................................10

5.1 Front view ................................................................................................... 10

5.2 Rear view .................................................................................................... 11

5.3 Internal view ................................................................................................ 12

5.4 Error monitoring .......................................................................................... 13

5.4.1 ibaOut-Tem p................................................................................................ 13

5.4.2 ibaOut-State................................................................................................ 14

5.5 Default installation position for cards ........................................................... 15

6Installation, connection and first switching on ..........................................16

6.1 Safety instructions....................................................................................... 16

6.2 lnstallation ................................................................................................... 16

6.3 Connection and first switching on ................................................................ 16

7Installation of measuring or additional boards ..........................................17

7.1 Safety instructions and notes ...................................................................... 17

7.2 Basic procedure .......................................................................................... 17

7.3 Opening the device ..................................................................................... 18

7.4 Installing ibaOut-Temp/ibaOut-State............................................................ 19

8Maintenance work .........................................................................................23

8.1 Basic procedure .......................................................................................... 23

8.2 Cleaning or replacing the dust filter ............................................................. 23

8.3 Cleaning and replacing the fan.................................................................... 24

8.4 Replacing the power supply unit.................................................................. 24

8.4.1 Power supply slide-in module for replacement of

redundant power supply unit........................................................................ 25

8.4.2 Replacing the complete redundant power supply unit.................................. 25

8.5 Restoring of a RAID system during operation.............................................. 28

8.5.1 System with Onboard RAID......................................................................... 28

8.5.2 System with RAID controller plugged in....................................................... 30

9Installing operating system and iba software.............................................35

9.1 Installation................................................................................................... 35

9.2 Installing Windows with the Recovery medium ............................................ 35

9.2.1 General ....................................................................................................... 35

Manual ibaRackline-PC CAM/HD

4 Issue 1.1

9.2.2 Select the language .................................................................................... 36

9.2.3 Enter the product key .................................................................................. 36

9.2.4 Partitioning.................................................................................................. 37

9.2.5 Completing installation ................................................................................ 39

9.3 Windows Updates ....................................................................................... 39

9.4 Antivirus Software ....................................................................................... 39

9.5 Installing iba software.................................................................................. 39

10 Technical data ............................................................................................... 40

10.1 Main data .................................................................................................... 40

10.2 Electronic components and interfaces......................................................... 40

10.3 Products...................................................................................................... 41

10.4 Device dimensions ...................................................................................... 42

11 Support and contact ..................................................................................... 43

ibaRackline-PC CAM/HD Manual

Issue 1.1 5

1 About this manual

This manual describes operation of the industrial PCs ibaRackline-PC CAM and

ibaRackline-PC HD.

1.1 Target group

This manual addresses in particular the qualified professionals who are familiar with han-

dling electrical and electronic modules as well as communication and measurement tech-

nology. A person is regarded to as professional if he/she is capable of assessing safety

and recognizing possible consequences and risks on the basis of his/her specialist train-

ing, knowledge and experience and knowledge of the standard regulations.

1.2 Designations

The following designations are used in this manual:

Action Designations

Menu command Menu Logic diagram

Call of menu command Step 1 – Step 2 – Step 3 – Step x

Example:

Select menu „Logic diagram – Add –

New logic

diagram

Keys <Key name>

Example: <Alt>; <F1>

Press keys simultaneously <Key name> + <Key name>

Example:

Buttons <Button name>

Example:

File names, Paths „File name“, „Path”

Example:

„Test.doc“

Manual ibaRackline-PC CAM/HD

6 Issue 1.1

1.3 Symbols used

If safety instructions or other information are used in this manual, they mean:

The non

-observance of this

safety information may result in an imminent risk of death or

severe injury:

By an electric shock!

Due to the improper handling of iba software products which are coupled to input and

output procedures with control function!

If you do not observe the safety instructions regarding the process and the system or

machine to be controlled, there is a risk of death or severe injury!

The non

observance of this safety information may result in a potential risk of death or

severe injury!

The

non-observance of this safety information may result in a potential risk of injury or

material damage!

Note

An information indicates special requirements or actions to be observed.

Important Note

Information that a special indication has to be observed, e.g. exceptions from the general

rule.

Tip

Tip or example which serves as helpful information or a trick to facilitate the work.

Other documentation

Reference to supplementary documentation or further literature.

ibaRackline-PC CAM/HD Manual

Issue 1.1 7

2 Scope of delivery

After unpacking check the completeness and intactness of the delivery.

The scope of delivery includes:

Industrial computer ibaRackline-PC CAM or ibaRackline-PC HD

Keyboard

Mouse

Mains cable

Documentation (on DVD)

External DVD drive

The documentation contains:

Manual (pdf)

Third party documentation (pdf)

Windows 10 Enterprise Long-Term-Servicing Version or Windows Server Version

Recovery medium (for the respective Windows version and all associated operating

system settings)

iba software, optional order

Hardware driver (motherboard, graphics card)

1 iba software license key (dongle), optional with iba software product and installed

inside of the device on request of the client

Serial number (iba-S/N)

Manual ibaRackline-PC CAM/HD

8 Issue 1.1

3 Versions

ibaRackline-PC CAM: RAID 5 system with 5 3,5“ SAS hard disks, 1 redundant

power supply unit, 1 RAID controller, external DVD drive

ibaRackline-PC HD: RAID 5 system with 5 3,5“ SAS hard disks, 1 NVMe-SSD, 1 re-

dundant power supply unit, 1 RAID controller, external DVD drive

Upgrade options:

Server system with Windows Server 2016 or higher

Hard disc extension from 5x 4 TB to 5x 8 TB SAS or to 5x 12 TB SAS

Additional graphics card

3.1 Factory setting

In delivery state, 2 users with or without password are configured:

User Password

pda -

Administrator xadmin

Important note

Change the default passwords after you have put the PC into operation!

This way, unau-

thorized usage will be impeded.

ibaRackline-PC CAM/HD Manual

Issue 1.1 9

4 Safety instructions

4.1 Designated use

The device may be used only for the following applications:

Machine test and commissioning of industrial systems

Measurement data logging and analysis

Applications of iba software products (ibaPDA, ibaLogic etc.)

4.2 Proper installation site

The device can be installed only according to manufacturer's specifications:

19“ cabinet

19“ rack line

Electric Shock!

Before opening the device disconnect it from the mains and pull out the mains plug from

he socket equipped with earth contact!

Never use the device with a damaged mains cable!

Before opening the device disconnect it from the mains by unplugging the

mains

cable

from the

socket equipped with an earth

contact and wait for several minutes until the

components have cooled down!

This will prevent injuries

due to the electric shock or

burns!

Connect the device to one supply voltage only according to specifications on the built-

in power supply unit!

Always use

a socket equipped with earth

contact! Use a terminal strip with overvoltage

protection or an uninterruptible power supply (UPS)!

Always connect the device to earthed power networks (TN

networks according to VDE

0100 Part 300 and IEC 60364

3)! The operation via ungrounded networks or networks

(IT networks) earthed via impedance is not permitted!

In case of faults, a defective device or a possible defect pull out the mains plug from the

socket equi

pped with earth contact!

Never put a damaged device into operation!

Pay attention to sharp edges in the housing!

Never switch off the device by means of the mains switch

before you have shu

t down

the

device.

Electrostatic discharge!

Touch the components only in electrostatically discharged state!

Manual ibaRackline-PC CAM/HD

10 Issue 1.1

5 Description

5.1 Front view

(Image without cover panels)

1 Fan, can be replaced from the front

2 USB interface for hidden dongle mounting

3 USB interface

4 LEDs (hard disk indicators)

5 Reset button

6 Power button

7 Plug-in slots for hard disks

Note

On delivery of the device the iba

oftware license key is in the documentation or on

client's request plugged

-in in the device.

Display elements

The display consists of 2 LEDs:

LED 1: HDD1 (hard disk 1)

LED 2: HDD2 (hard disk 2)

The hard disk controller is connected to the LED 1 and lights up green in case of hard

disk activity.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali IBA Scrivania

IBA

IBA ibaOfficeline SAS Manuale utente

Manuali Scrivania popolari di altre marche

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP Presario SV7000 - Desktop PC Manuale utente

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente

IBA ibaRackline-PC CAM Manuale utente

Manuali Scrivania popolari di altre marche