iBell AG10-70 Manuale utente
ANGLE GRINDER
AG10-70|72|92
1
2
1. GENERAL POWER TOOL SAFETY WARNINGS __________
2. MARBLE CUTTER SAFETY WARNINGS_________________
3. PRODUCT OVERVIEW _________________________________
4. PRODUCT SPECIFICATIONS ___________________________
5. SETUP _________________________________________________
6. PRODUCT FUNCTIONS AND ASSEMBLY________________
7. GENERAL OPERATION ________________________________
8. TROUBLESHOOTING __________________________________
TABLE OF CONTENTS
IBL AG10-70|72|92
3
6
8
10
11
12
15
18
3
Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapted plugs with earthed(grounded)
power tools. Modified plugs and un-matching outlets will increase
the risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep it away from heat, oil, sharp edges
or moving parts.
When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference. The term “power tool” in the
warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool
WORK AREA SAFETY
ELECTRICAL SAFETY
IBL AG10-70|72|92
4
Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs or alcohol. A moment of
inattention while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery pack,
picking up or carrying the tool.
Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected
situations.
Dress properly, say no to loose clothing or jewellery. Keep your
hair, clothing away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related
hazards.
Have your power tool serviced by a qualified repair-person
using only identical replacement parts.This will ensure that the
safety of the power tool is maintained.
When servicing a power tool, use only identical replacement
parts. Follow instructions in the maintenance section of this
manual. Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of shock or injury.
PERSONAL SAFETY
IBL AG10-70|72|92
SERVICE
5
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer
at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and
off. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
Keep handles and grasping surfaces dry, clean and free from oil
and grease. Slippery handles and grasping surfaces do not allow
for safe handling and control of the tool in unexpected situations.
Even if you are operating this product in accordance with all the
safety requirements, potential risks of injury and damage remain.
The following dangers can arise:
Health defects resulting from vibration emission if the product is
being used over long periods of time or not adequately managed
and properly maintained.
Injuries and damage to property due to broken cutting attachments
or the sudden impact of hidden objects during use.
Danger of injury and property damage caused by other objects or
due to natural reactions or calamities.
POWER TOOL USE AND CARE
IBL AG10-70|72|92
RESIDUAL RISKS
6
Wear personal protective equipment. Depending on application,
use face shield, safety goggles or glasses. As appropriate, wear
dust mask, ear protectors, gloves and workshop apron capable
of stopping small abrasive or work piece fragments. The eye
protection must be capable of stopping flying debris generated by
various operations. The dust mask or respirator must be capable
of filtrating particles generated by your operation. Prolonged
exposure to high intensity noise may cause hearing loss.
Hold the power tool by insulated gripping surfaces only when
performing an operation, where the rotating accessory may contact
hidden wiring or its own cord. Use the auxiliary handle provided.
Keep children and other bystanders a safe distance away from
work area. Anyone entering the work area must wear personal
protective equipment. Fragments of work piece or of a broken
accessory may fly away and cause injury beyond immediate area
of operation.
Do not run the tool while carrying it at your side. Accidental
contact with the rotating or spinning cutting or grinding accessory
could snag your clothing, pulling the accessory into your body.
Never place your hand near the rotating accessory.
Do not operate the power tool near flammable materials. Sparks
could ignite these materials.
Use only wheel or disc (rotating accessory) types that are
recommended for your tool and the specific guard designed for
the selected wheel. Wheels for which the tool was not designed
cannot be adequately guarded and are unsafe.
The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool. Accessories running
faster than their rated speed can break and fly apart.
ANGLE GRINDER SAFETY WARNINGS
IBL AG10-70|72|92
WARNING! Misuse or failure to follow the safety rules stated in
this instruction manual may cause serious personal injury.
7
Do not use the angle grinder as a fixed tool. Do not use cutting
wheels for grinding or grinding wheels for cutting.
The work piece should be properly supported. Support panels or
any oversized work to minimize the risk of wheel compressing and
kickback. Do not hold unsecured work in your hand.
Before using the tool on an actual work piece, let it run for a
while. Watch for any vibration that could indicate poor installation
or a poorly balanced wheel. Make sure the wheel is not contacting
the work piece before the switch is turned on. Use the specified
surface of the wheel to perform the grinding.
Do not apply excessive pressure to the wheel. Do not attempt
to make an excessive depth of cut. Overstressing the wheel
increases the possibility of kickback or wheel breakage.
Always use the dust guard provided with the tool. Never use
the tool without the safety guard installed. The guard helps to
protect the operator from broken wheel fragments, accidental
contact with wheel and sparks that could ignite clothing.
Positioning the cord should be clear off the wheel. If you lose
control, the cord may be cut or snagged and your hand or arm may
be pulled into the rotating accessory.
Never lay the power tool down until the accessory has come to
a complete stop. The wheel may grab the surface and pull the
power tool out of your control.
Do not touch the work piece immediately after operation; it may
be extremely hot and could burn your skin. So, using gloves is
recommended while operating and handling.
When an extension cord is required you must ensure it has the
correct ampere rating for your power tool and that it is in a safe
electrical condition. Fully unwind the extension cords inorder to
avoid potential overheating and other hazards.
Do not use the tool if it has been damaged, left outdoors in the
rain, wet or damp environments, or immersed in liquid.
Your tool should only be repaired by a qualified technician. This
tool is in accordance with the relevant safety requirements. Repairs
should only be carried out by qualified persons using original
spare parts, otherwise this may result in considerable danger to
the user.
IBL AG10-70|72|92
8
PRODUCT OVERVIEW
1. ON/OFF switch
2. Wheel guard
3. Auxiliary handle
3
1
4
2
6
5
4. Grinding/Cutting wheel
5. Spindle lock button
6. Motor housing
IBL AG10-70
ACCESSORIES
Auxiliary handle
Wheel guard
Spanner wrench
COMPONENT LIST
IBL AG10-70|72|92
9
IBL AG10-72
IBL AG10-92
1
4
IBL AG10-70|72|92
5
3
2
6
3
1
4
2
6
5
Questo manuale è adatto per i seguenti modelli
2
Indice
