IBT IB700 Manuale utente
IB700
Full-Size Socket 370 CPU Card
With Optional VGA/LAN/SCSI
USER’S MANUAL
Version 1.0
B
ii IB700 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Celeron are registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.
IB700 User’s Manual iii
Table of Contents
Introduction.....................................................................1
Product Description ........................................................1
Checklist........................................................................2
Specifications .................................................................3
Board Dimensions...........................................................4
Installations......................................................................5
Installing the CPU...........................................................6
MicroPCI Daughter Card Installation...............................6
Installing the Memory (DIMM)........................................7
Setting the Jumpers.........................................................8
Connectors on IB700 ....................................................14
Watchdog Timer Configuration......................................28
iv IB700 User’s Manual
This page was intentionally left blank.
INTRODUCTION
IB700 User’s Manual 1
Introduction
Product Description
IB700 is a high-performance flexible CPU card that comes with two built-
in MicroPCI Sockets that supports MicroPCI daughter cards with VGA,
VGA/LAN, Ethernet (LAN), and SCSI functions. It is based on the Intel
440BX AGPset and features a Socket 370 architecture that supports Intel
Celeron andCoppermineprocessorsusing 66MHzand100MHz frontside
bus respectively.
System memory is provided by three DIMM sockets that accommodate
up to 768MB SDRAM. The Award BIOS facilitates easy system
configuration and peripheral setup. Other advanced features include
DiskOnChipflashdisk support,watchdog timer,USB andIrDAinterface.
DiskOnChip flashdisksarestoragedevicesthathasnomovingpartsand
emulates FDD/HDD with Flash/RAM/ROM offering reliable
data/programstorage and longlife span.Theyare reliableand suitable for
industrial or other harsh environments characterized by motion, shock,
vibration, adverse temperature, dust and humidity. Other features include
faster data access, longer MTBF, lower power consumption, cost
effective for small capacity and small form factor.
The IB700 CPU card is designed with all components placed on a single
side, thus, offering stable performance in a harsh industrial environment.
INTRODUCTION
2IB700 User’s Manual
Checklist
Your IB700 package should include the items listed below.
•
The IB700 Industrial CPU Card
•
This User’s Manual
•
1 IDE Ribbon Cable
•
1 Floppy Ribbon Connector
•
2 Serial Port Ribbon Cable and 1 Parallel Port Attached to a
Mounting Bracket
•
1 CD containing the following:
•
Intel PCI IDE Driver and Flash Memory Utility
•
CHIPS C&T 69000 VGA Drivers
•
Ethernet Drivers
•
Initio Inic1060 Ultra2 SCSI Drivers
INTRODUCTION
IB700 User’s Manual 3
Specifications
Processor
Supported
Socket 370 support Intel Celeron / Coppermine,
300MHz~850MHz, 66MHz/100MHz Bus Speed
Chipset Intel 440BX AGPset
BIOS Award BIOS
Supports ACPI, DMI, PnP
System Memory 3x DIMM sockets support up to 768MB capacity
ECC supported
Multi I/O Chipset Winbond W83977TF (keyboard controller is built-in)
I/O Features 1x FDD (up to 2.88MB, 3 Mode, LS120)
1x Parallel Port (EPP, ECP Port)
2x Serial Ports (1x RS232 and 1x RS232/422/485)
1x IrDA TX/RX Headers
Bus Master IDE 2x IDE interfaces for up to 4 devices; supports PIO Mode 3/4
or Ultra DMA/33 IDE HDD, and ATAPI CD-ROM
VGA (option) Using IBD69 MicroPCI VGA card or IBD99 MicroPCI
VGA/LAN Combo card that features:
CHIPS 69000 PCI VGA accelerator
CRT & LCD panel support
2MB integrated memory
Ethernet (option) Using IBD59 MicroPCI LAN card or IBD99 MicroPCI
VGA/LAN Combo card that features:
Intel 82559 Fast Ethernet controller
10/100Mbps data transfer speeds
WakeOnLAN support
SCSI (option) Using IBD60 MicroPCI LAN SCSI card featuring:
Initio Inic1060 Ultra 2 SCSI controller
Built-in Ultra2 SCSI connector
Hardware
Monitoring
Winbond W83781D IC
Monitors CPU/system temperature and voltages
SSD Interface Support M-Systems 2MB~144MB DiskOnChip flash disk
Other Features Watchdog timer, ISA high drive, PICMG compliance
Form Factor Full Size
Dimensions 338mm x 122mm (13.3”x 4.8”)
Power
Requirements
+5V : 12A (max)
+/-12V : 200mA (max)
INTRODUCTION
4IB700 User’s Manual
Board Dimensions
INSTALLATIONS
IB700 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the IB700 in order to set up a workable system. The topics
covered are:
Installing the CPU...........................................................6
MicroPCI Daughter Card Installation...............................6
Installing the Memory (DIMM)........................................7
Setting the Jumpers.........................................................8
Connectors on IB700 ....................................................14
Watchdog Timer Configuration......................................28
INSTALLATIONS
6IB700 User’s Manual
Installing the CPU
The IB700 CPU card supports a Socket 370 processor socket for Intel
Celeron/Coppermine processors.
The Socket 370 processor socket comes with a lever to secure the
processor.Raisethislevertoabouta90°angletoallowtheinsertionofthe
processor. Place the processor into the socket by making sure the notch
on the corner of the CPU corresponds with the notch on the inside of the
socket. Once the processor has slide into the socket, return the lever to
the lock position. After you have installed the processor into the socket,
check if the jumpers for the CPU type and speed are correct.
NOTE:Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
MicroPCI Daughter Card Installation
The IB700 CPU card is integrated with twoMicroPCI sockets that use
SO-DIMM 144-pin connectors. These sockets can accommodate the
VGA, Ethernet or SCSI MicroPCI daughter cards.
To insert a MicroPCI daughter card, position it at about 30°(Figure 1)
to the PCB and gently push it into the MicroPCI socket. Once inserted,
slowly press the card towards the PCB until it locks on both sides to the
clips of the connector (Figure 2). Screw the card to the PCB to secure the
installation.
Figure 2.
Figure 1.
Figure 1. Figure 2.
Indice
Altri manuali IBT Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
