Iclebo O5 Manuale utente
iCLEBO O5 Quick Guide
www.iclebous.com
■ The following contents must be read before using the product.
2
Installation / Charging / Operation
❶ Install side brush(L/R) ❷ Install charging station
Adaptor jack
1.5m
0.5m
0.5m
3
▶
❸ Turn ON the robot ❹Initial charging ❺ Start/pause and stop cleaning
Main body
Dedicated App
(iCLEBO O5)
Remote controller
ON OFF ※Use after charging for 2 hours
Green lamp
lights up
4
Installing App for iCLEBO O5
ON OFF
❶Download and install App ❷Register and Login ❸Turn Off and
On the robot
*Notes before use
Wi-Fi
environment
2.4GHz
IEEE 802.11b/g/n ※Does not support Wi-Fi 5G
Required
smartphone version
Android : 4.4 or later
iOS : 9.0 or later
Serial No. XXXXXX0000
❹Check
the Serial Number
5
❺Select iCLEBO O5
from Phone Wi-Fi setting
❻Select Local Wi-Fi
from App setting
❼Set smartphone
Wi-Fi and LTE
❽Complete App
connection
*The following predicaments requires you to reset the robot again.
Reset instruction are located on Pg.23 in the User Manual under the section <Reset Settings>
1. If the registered iCLEBO O5 is removed from the app.
2. If the robot is placed in a new location with a different Wi-Fi connection.
6
Please refer to the causes and solutions according to the Status Code on the display when
an error occurs.
After resolving the problem, press the start / pause button ( ) to continue cleaning.
Troubleshoot
Resolving Inspection Messages
Status Code Cause Solution
Lifted Wheel If the wheel is caught on a threshold and carpet, or lifted from the ground, please place
the robot back on a flat surface.
Undetected Floor Move the cleaning robot to a flat surface.
Undetected Dust Bin Be sure to reinsert dustbin correctly.
Wheel Motor Overload Remove debris and foreign objects from around the wheel.
Main Brush and Side
Brush Overload Remove main and side brush to check for hairs and debris around metal pins.
Suction motor Overload Clean filter and empty dustbin.
7
Notice Messages
Notice Message Content
1) Robot returns to starting point after cleaning is finished.
2) Robot completed software update.
Robot is looking for a charging station.
Status Code Cause Solution
Internal System Error Turn off and on the main side power switch of the robot.
Front Wheel Malfunction Check for proper installation or any front wheel damages.
Low Battery Allow the robot to charge.
33, Harmony-ro, 187 beon-gil, Yeonsu-gu, Incheon, Republic of Korea
2103304170
iOMN.w.US.V1
Indice
Altri manuali Iclebo Aspirapolvere
Iclebo
Iclebo YCR-M04-01 smart Manuale utente
Iclebo
Iclebo YCR-M05 Manuale utente
Iclebo
Iclebo YCR-M05 Manuale utente
Iclebo
Iclebo YCR-M05 Manuale utente
Iclebo
Iclebo Arte YCR-M05-02 Manuale utente
Iclebo
Iclebo YCR-M05 Manuale utente
Iclebo
Iclebo OMEGA Manuale utente
Iclebo
Iclebo YCR-M04-02 Manuale utente
Iclebo
Iclebo POP YCR-M05 Manuale utente
Iclebo
Iclebo YCR-M04-02 Manuale utente
