iClick Mini Madison 1.3M Manuale utente
User Manual
This manual is designed to assist you in using the digital camera. Information
in this document has been carefully checked for accuracy; however, no
guarantee is given to the absolute correctness of the contents. The
information in this document is subject to change without notice.
Federal Communications Commission (FCC) Compliance
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Note!
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
Use of shielded cable is required to comply with Class B limits in Subpart B of
Part 15 of the FCC rules. Do not make any changes or modifications to the
equipment unless otherwise specified in the manual. If such changes or
modifications should be made, you could be required to stop operation of the
equipment.
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.
Canadian Department of Communications
This class B digital apparatus meets all requirements of the Canadian
Interference-causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Réglement sur le matériel brouilieur du Canada.
Trademark Recognition
Windows (an abbreviated term referring to the Microsoft Windows Operation
System), NetMeeting, and Media Player are registered trademarks and
products of Microsoft Corporation registered in the USA and other countries.
Arcsoft PhotoImpression 5 and Arcsoft VideoImpression 2 are products and
trademarks of Arcsoft Inc. Other corporate, product names, or trade
references are trademarks or registered trademarks of their respective
companies.
General Warnings
When fitting batteries into the camera, check the polarity of the batteries (-
and +) to ensure that you insert the battery correctly. Incorrect polarity may
result in the batteries splitting or leaking and causing a fire, injury, or soiling of
the battery compartment.
Remove the batteries if the camera will not be used for an extended period of
time. The batteries may leak and cause a fire, injury or soiling of the battery
compartment. If the batteries leak, clean and wipe the battery compartment
carefully and install new batteries. Wash your hands carefully if you touch the
battery fluid. Please note that when you remove the batteries your
images will be lost from the camera memory.
WARNING: Handling the USB cable on this product may expose you to lead,
a chemical known to the State of California to cause birth defects or other
reproductive harm. Wash your hands after handling.
Table of Contents
GETTING STARTED....................................................................................... 1
ABOUT THE CAMERA……………………………………………………………...…1
Unpacking the camera………………………………………………………...2
CAMERA FEATURES………………………………………………………………...3
Front View……………………………………………….……………………..3
Rear View………………………………………………………………………4
CHANGING THE CAMERA FACE PANEL……………………………………………..5
INSERTING A BATTERY……………………………………………………………...6
CAPTURING IMAGES.................................................................................... 8
TURNING THE CAMERA ON AND OFF………………...……………………………8
LCD INFORMATION/STATUS DISPLAY………………………………………………8
CAMERA ICONS AND DESCRIPTIONS………………………………………………10
CAPTURING DIGITAL STILL IMAGES……………………………………………….12
CAPTURING STREAMING SNAPSHOTS (VIDEO CLIPS)………………………….…14
DELETING IMAGES AND VIDEOS…………………………………………………..16
SOFTWARE INSTALLATION....................................................................... 17
SOFTWARE OVERVIEW &FEATURES……………………………………………...17
Picture Manager (TWAIN)…………………………………………………...17
Arcsoft PhotoImpression 5………………………………………………….18
Arcsoft VideoImpression 2…………………………………………………..18
INSTALLING THE SOFTWARE……………………………………………………….19
Installing the DIGITAL CAMERA Driver……………………………………20
CONNECTING TO YOUR PC....................................................................... 23
CONNECTING THE DIGITAL CAMERA TO YOUR PC………………………………...23
DOWNLOADING IMAGES AND VIDEOS TO YOUR PC............................. 26
TRANSFER IMAGES &VIDEOS WITH THE TWAINAPP………….…………………..26
TRANSFER IMAGES WITH PHOTOIMPRESSION 5…………………………………..28
USING THE CAMERA AS A PC/WEB CAMERA......................................... 30
USING THE DIGITAL CAMERA AS A PC/WEB CAMERA………………………………...30
Connecting the camera to a PC…………………………………………….30
VIEWING VIDEO CLIPS WITH WINDOWS MEDIA PLAYER……………………………...31
VIDEO CONFERENCING WITH NETMEETING........................................... 32
HOW TO USE THE DIGITAL CAMERA WITH MICROSOFT NETMEETING……….…….32
QUICK TIPS.................................................................................................. 34
CAPTURING IMAGES INDOORS –GENERAL TIPS………………………………….34
CAPTURING IMAGES OUTDOORS –GENERAL TIPS……………………………….35
TROUBLESHOOTING .......................................................................38
1
G
GE
ET
TT
TI
IN
NG
G
S
ST
TA
AR
RT
TE
ED
D
About the camera
Congratulations on your purchase of the digital camera. Your
camera has been ergonomically designed to allow you to quickly
and easily capture quality digital images and short video clips.
With a 1.3 Mega-Pixel image sensor you are assured of clear
images that can be printed, displayed on a web site, or sent to
friends and family through e-mail. The 1.3 Mega-Pixel image sensor
is capable of capturing digital still images and streaming snapshots.
Using the Picture Manager interface software, the streaming
Snapshots from your camera will automatically be converted into
digital video clips. You can also use the camera as a PC/web
camera, taking real-time images when connected to your PC with
the supplied USB cable.
The included software enables you to easily download your images
and video to your PC. With Arcsoft PhotoImpression5 and
VideoImpression2 software you can edit your images and video with
ease. For more information on how to use Arcsoft
PhotoImpression5 and VideoImpression2, you may visit their
website at www.Arcsoft.com .
2
Unpacking the camera
Open the package and examine the contents. Your package should
contain the following items:
•Digital camera
•Keychain clip
•Camera neck strap
•Tilt base (optional)
•USB cable
•Color face plates (optional*)
•Software CD containing:
−Picture Manager (TWAIN driver)
−Arcsoft PhotoImpression 5
−Arcsoft VideoImpression 2
zColor face plates may be included with your camera kit
depending upon the options selected by your camera retailer.
3
Camera Features
Please refer to the following diagram to identify the camera features:
Front View
4
Rear View
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali iClick Macchina fotografica digitale
