Icom IC-F4200DEX Manuale utente

INSTRUCTION MANUAL

The photo shows the

VHF transceiver.

VHF DIGITAL/ANALOG TRANSCEIVER

iF3200DEX

Series

UHF DIGITAL/ANALOG TRANSCEIVER

iF4200DEX

Series

This device complies with Part 15 of the FCC Rules. Op-

eration is subject to the condition that this device does not

cause harmful interference.

FOREWORD

READ ALL INSTRUCTIONS carefully and completely before

using the transceiver.

SAVE THIS INSTRUCTION MANUAL— This instruc-

tion manual contains important operating instructions for the IC-

F3203DEX VHF DIGITAL/ANALOG TRANSCEIVER and the IC-

F4203DEX UHF DIGITAL/ANALOG TRANSCEIVER

•This instruction manual includes some functions which are us-

able only when they are preset by your dealer. Ask your dealer

for details.

•To use in explosive atmospheres, read the leaﬂet “SAFETY

MANUAL” comes with the transceiver.

EXPLICIT DEFINITIONS

WORD DEFINITION

RDANGER! Personal death, serious injury or an explosion

may occur.

RWARNING! Personal injury, ﬁre hazard or electric shock

may occur.

CAUTION Equipment damage may occur.

NOTE If disregarded, inconvenience only. No risk of

personal injury, ﬁre or electric shock.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorpo-

rated (Japan) in Japan, the United States, the United Kingdom, Germany, France,

Spain, Russia and/or other countries.

IDAS is trademark of Icom Incorporated (Japan).

dPMR and the dPMR logo are trademarks of the dPMR MoU Association.

All other products or brands are registered trademarks or trademarks of their re-

spective holders.

VOICE CODING TECHNOLOGY

The AMBE+2™ voice coding Technology embodied in this product

is protected by intellectual property rights including patent rights,

copyrights and trade secrets of Digital Voice Systems, Inc. This

voice coding Technology is licensed solely for use within this Com-

munications Equipment. The user of this Technology is explicitly

prohibited from attempting to extract, remove, decompile, reverse

engineer, or disassemble the Object Code, or in any other way

convert the Object Code into a human-readable form. U.S. Patent

Nos.

#5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365,

#5,649,050, #5,630,011, #5,581,656, #5,517,511, #5,491,772,

#5,247,579, #5,226,084 and #5,195,166.

iii

PRECAUTIONS

RDANGER! NEVER short the terminals of the battery pack.

RDANGER! Use and charge only speciﬁed Icom battery packs

with Icom radios or Icom chargers. Only Icom battery packs are

tested and approved for use with Icom radios or charged with Icom

chargers. Using third-party or counterfeit battery packs or chargers

may cause smoke, ﬁre, or cause the battery to burst.

RWARNING! NEVER hold the transceiver so that the antenna

is very close to, or touching exposed parts of the body, especially

the face or eyes, while transmitting. The transceiver will perform

best if the microphone is 5 to 10 cm (2 to 4 inches) away from the

lips and the transceiver is vertical.

RWARNING! NEVER operate the transceiver with a headset

or other audio accessories at high volume levels. Hearing experts

advise against continuous high volume operation. If you experience

a ringing in your ears, reduce the volume level or discontinue use.

RWARNING! NEVER operate the transceiver while driving a

vehicle. Safe driving requires your full attention—anything less may

result in an accident.

CAUTION: MAKE SURE the ﬂexible antenna and battery pack

are securely attached to the transceiver, and that the antenna and

battery pack are dry before attachment. Exposing the inside of the

transceiver to water will result in serious damage to the transceiver.

DO NOT operate the transceiver near unshielded electrical blast-

ing caps.

PRECAUTIONS

DO NOT push [PTT] when you do not actually intend to transmit.

DO NOT use or place the transceiver in direct sunlight or in areas

with temperatures below–20°C (–4°F) or above +55°C (+131°F).

DO NOT modify the transceiver. The speciﬁcations may change

and then not comply with the requirements of a corresponded

regulation. The transceiver warranty does not cover any problems

caused by unauthorized modiﬁcation.

DO NOT use harsh solvents such as benzine or alcohol when

cleaning, as they will damage the transceiver surfaces.

BE CAREFUL! The transceiver will become hot when operating

it continuously for long periods of time.

BE CAREFUL! The transceiver meets IP67 requirements for

dust-tight and waterproof protection.

However, once the transceiver has been dropped, dust-tight and

waterproof protection cannot be guaranteed because of possible

damage to the transceiver’s case or the waterproof seal.

Even when the transceiver power is OFF, a slight current still ﬂows

in the circuits. Remove the battery pack or batteries from the trans-

ceiver when not using it for a long time. Otherwise, the installed

battery pack or batteries will become exhausted, and will need to

be recharged or replaced.

MAKE SURE to turn the transceiver power OFF before connect-

ing the supplied/optional equipment.

TABLE OF CONTENTS

FOREWORD ..................................................................................i

EXPLICIT DEFINITIONS................................................................i

VOICE CODING TECHNOLOGY ..................................................ii

PRECAUTIONS............................................................................ iii

TABLE OF CONTENTS.................................................................v

1 ACCESSORIES....................................................................1–4

Supplied accessories■............................................................1

Accessory attachments■........................................................1

2 PANEL DESCRIPTION ......................................................5–13

Front, top and side panels■....................................................5

LED indicator■........................................................................7

Programmable function keys■..............................................10

3 BASIC OPERATION.........................................................14–26

Turning ON the power■.........................................................14

Channel selection■...............................................................15

Call procedure■....................................................................16

Receiving and transmitting■.................................................17

Setting the microphone gain■...............................................20

Setting the squelch level■.....................................................21

Setting the Beep level■.........................................................22

Setting the Ringer level■.......................................................23

Output power level selection■...............................................24

Priority A channel selection■................................................24

Lone Worker Emergency Call■.............................................25

Man Down Emergency Call■................................................25

Emergency Call■..................................................................26

TABLE OF CONTENTS

4 dPMR OPERATION .........................................................27–32

dPMR operation■..................................................................27

Receiving a call■..................................................................27

Transmitting a call■...............................................................30

Status message transmission■.............................................32

Scrambler function■..............................................................32

5 BATTERY CHARGING.....................................................33–38

Caution■...............................................................................33

Battery charger■...................................................................37

6 SPEAKER MICROPHONE...............................................39–40

Optional HM-203EX description■.........................................39

To attach■.............................................................................40

7 OPTIONS..........................................................................41–42

8 SAFETY TRAINING INFORMATION ...............................43–46

9 FCC INFORMATION ..............................................................47

Accessory attachments■

Flexible antennaD

Connect the ﬂexible antenna to the antenna connector.

CAUTION:

• NEVER carry the transceiver by

holding only the antenna.

• DO NOT connect the antenna other

than listed on page 42.

• Transmitting without an antenna

may damage the transceiver.

Supplied accessories■

The following accessories are supplied with the transceiver.

1ACCESSORIES

Battery pack*

Belt clip* Connector cover

(with screws)

Battery charger* AC adapter*

* Not supplied, or the shape is different, depending on the version.

Flexible antenna

(This illustration is for the VHF type.)

ACCESSORIES

Belt clipD

To attach the belt clip:

➥ Slide the belt clip in the direction of the arrow until the belt clip

locks in place, and makes a ‘click’ sound.

Belt clip

To detach the belt clip:

Remove the battery pack from the transceiver, if it is attached.q

(p. 3)

Lift the tab up (wq), and slide the belt clip in the direction of the

arrow (w).

Ta b

1ACCESSORIES

Battery packD

To attach the battery pack:

Slide the battery pack on the back of the transceiver in the direction of

the arrow (q), then lock it with the battery release button.

• Slide the battery pack until the battery release button makes a ‘click’

sound.

To remove the battery pack:

Push the battery release button in the direction of the arrow (w) as

shown below. The battery pack can be removed.

NEVER remove or attach the battery pack when the transceiver

is wet or soiled. This may result water or dust getting into the

transceiver and/or battery pack and may result in them being

damaged.

Battery release

button

NOTE: Keep the battery pack terminals clean. It’s a good idea to

occasionally clean them.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Ricetrasmettitore popolari di altre marche

Yaesu

Yaesu FT-7B Manuale utente

Kenwood

Kenwood ProTalk TK-3201 Manuale utente

Texas Instruments

Texas Instruments TLK10232 Manuale utente

Mizuho

Mizuho MX-2 Guida del prodotto

Kenwood

Kenwood TK-3180 Manuale operativo e di manutenzione

Blitz

Blitz MJ-398U Manuale utente

Utilicom

Utilicom LongRanger 2050 Manuale utente

Standart

Standart HX290UKA Manuale utente

Altronix

Altronix Pace1PTM Manuale utente

Kirisun

Kirisun PT2208 Manuale utente

ELECRAFT

ELECRAFT KX2 Manuale utente

Zodiac

Zodiac K3 Manuale utente

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuale utente

Kenwood

Kenwood TK-2217 Manuale utente

Siemens

Siemens PSO 4000 Manuale utente

Kenwood

Kenwood TS-590SG Manuale utente

Midland

Midland G8E-BT Manuale

ComNav

ComNav Mariner X2 Manuale utente