Icom IC-M424 Manuale utente
IC-M424
VHF MARINE TRANSCEIVER
HI/LO
MIC
TO ANTENNA
COMMANDMICIV
DC Power Connector
+ (Red)
– (Black)
AF Out Leads
Orange:Public Address Speaker (+)
Gray:Public Address Speaker (–)
Blue:External Speaker (+)
Black: External Speaker (–)
NMEA Leads
Brown:Out- Talker B (Data-L) (–)
White: Out+Talker A (Data-H) (+)
Green:In- Listener B (Data-L) (–)
Yellow:In+ Listener A (Data-H) (+)
HM-195
COMMANDMICIV™
Handset
HM-196
Handset
(non-removable)
*
*
* For more details about connections please review
pages 83 & 84 in the Instruction Manual.
1Represents the NMEA In/Out Leads.
2Represents the AF Out Leads.
OPC-1540
20ft of cable
OPC-1541
20ft of cable
OPC-478UC
Programming
Cable
OPC-980
Programming
Adapter Cable
**
©2015 Icom America Inc. The Icom logo is a registered
trademark of Icom Inc. 42070
1
1
2
2
Wires For Standard
External Speaker (4 Ω)
©2015 Icom America Inc. Page 2
Icom America, Inc.
12421 Willows Rd NE
Kirkland, WA
Connecting a GPS to Your Icom M324/M424 radio
On the back panel of your radio, there is a connector with four colors: brown, white,
green, and yellow. The yellow and green wires connect to your GPS.
Connections
Radio
GPS
NMEA in + (yellow) →NMEA / Data out
NMEA in – (green) →NMEA / Data ground
GPS Example Connections
You will need to solder the 2 wires to the NMEA wires from your GPS. For more
specific information, consult the individual instruction manual from the GPS
manufacturer.
Garmin GPS
©2015 Icom America Inc. Page 3
Icom America, Inc.
12421 Willows Rd NE
Kirkland, WA
Raymarine GPS
Note: When using some Raymarine equipment you may need to connect your Icom
radio directly to the Raymarine GPS itself, not through a repeated port from other
equipment, such as a plotter. This ensures that the proper NMEA sentence passes to
the radio.
Standard Horizon GPS
©2015 Icom America Inc. Page 4
Icom America, Inc.
12421 Willows Rd NE
Kirkland, WA
Troubleshooting Your GPS Connection
•Your Plotter/GPS receiver must be capable of sending the proper sentences
(listed below) set for NMEA 0183 (Check your Plotter/GPS instructions for
information.)
•Verify that the plotter/GPS device is sending GPGGA, GPGLL, GPRMC, GPVTG, or
GPGNS sentences. (Check Plotter/GPS Instructions.)
•If you are still not receiving latitude and longitude, you can try setting the plotter
to send just a single GPGGA sentence.
•Have a technician check the plotter/GPS using test equipment to verify it is
sending the GPS sentence.
•Check the solder points on the radio and plotter connectors. Some connectors are
very small, increasing the likelihood of solder bridging.
Indice
Altri manuali Icom Ricetrasmettitore
Icom
Icom ic-2730A Manuale utente
Icom
Icom IC-M500D Manuale utente
Icom
Icom IC-756PROIII Manuale utente
Icom
Icom IC F110S Manuale utente
Icom
Icom iC-F5012 Manuale utente
Icom
Icom IC-M603 Manuale utente
Icom
Icom ID-51A Guida all'installazione
Icom
Icom IC-F31GS Istruzioni per la costruzione
Icom
Icom IC-V82 Manuale utente
Icom
Icom IC-2A Manuale utente
Icom
Icom IC-04A Manuale utente
Icom
Icom IC-F61-L Manuale utente
Icom
Icom IC-F21 Manuale utente
Icom
Icom IC-12GE Manuale utente
Icom
Icom F3020 Series Manuale utente
Icom
Icom IC-F3061T Manuale utente
Icom
Icom ID-51E Manuale utente
Icom
Icom IC-746 Manuale utente
Icom
Icom IC-E80D Manuale utente
Icom
Icom IC-F14/S Manuale utente
