Menu options:
Exit the menu before making the following adjustments.
Lock / unlock parameters: (default: unlocked)
Press “BACK”, then “ENTER” and hold the 2 buttons until the desired option is displayed. The display cycles
between “Loc” (no changes allowed) & “u.Loc” (parameters may be adjusted)
Full / reduced menu (default: Full)
Press “SELECT”, then “ENTER” and hold the 2 buttons until the desired option is displayed. The display cycles
between “rEdu” (limited menu) & “Full” (all parameters are accessible)
Access Code: (default: no code)
Once the above options have been set as required, Press “BACK” and “SELECT” simultaneously until “CODE” is
displayed. Now use the “+” & “-” to enter a code.
Once a code is entered, access to the options above is not permitted. To clear the code, re-enter the same code
again. If the code is forgotten. Press and hold “+” & “-” until “CODE” is displayed while re-applying power to the
device.
Notes:
1. The display will show “Err” if the sensor is not connected correctly, or is faulty.
2. To avoid damage to the sensor, ensure that it is connected correctly before applying power.
Menu operation example: Set the temperature to 30.0 °C:
Press “MENU” to display “°C”. Press “SELECT” to view the current value. Use the “+” and “-” buttons to change the
value to 30.0. Press “ENTER” to return to the menu. Press “BACK” to exit the menu.
Specifications:
Temperature range - 25.0 °C to + 105.0 °C
Accuracy: ±1.2 °C
Input voltage: ±15% of rated input
Led indication: Relay status
Probe: 3-wire digital
Probe length: 2m, extendable to 200m
(With external 220uF 16V capacitor)
12 Month guarantee:
Our product is guaranteed for a 12 (twelve) month period from date of purchase. This guarantee is valid for defects
arising from failure during specified conditions. This guarantee does not cover damage due to abuse, tampering or
improper installation. Our company does not accept liability for any consequential damage or loss arising from
product malfunction. Should this product prove to be defective, kindly return for inspection or repair.
For further information, please visit us at:
www.icon-electronics.com
Relay specifications:
Contact rating: 10A250 VAC 2500VA(Resistive)
Mechanical life: 30 million operations
Electrical life: 250 000 operations (at maximum load)
SUPPLY
P49-TC1 Temp. controller (3-wire digital) www.iconelectronics.co.za
12345678
9 101112131415 16
RELAY1
DIGITAL SENSOR
GREEN BLUE RED N(-) L(+)
SUPPLYRelay 2
Relay 1
RED
BLUE
GREEN
PROBE
TOP VIEW
Temperature controller
D4-TC0/1/2
www.iconelectronics.co.za
L
+
N
-
(AC)
(DC)
D4-TC 1& 2
ONLY
D4-TC 2
ONLY
