ICON ATV08 Manuale utente
USER’S MANUAL
ATV08
Safety instructions and notes .......................................4
Safety instructions...............................................................................5
Notes ............................................................................................................ 6
Basic structure and name...............................................7
Assembly method and requirements.........................9
Installation of Headlight and front fender .......................... 10
Installation of front wheel ...............................................................11
Installation of common front wheel..........................................11
Assembly requirements...................................................................12
Operation and adjustment...........................................13
Introduction to speed boosting system.................................14
Catalog Charging ...................................................................................................14
Installation and charging of battery ......................................14
Charging steps and method ........................................................15
Reflection and lighting system....................................................16
Safety height mark............................................................................16
Braking system......................................................................................17
Speed control system.......................................................................19
Derailleur...................................................................................................19
Use and maintenance................................................... 22
Routine inspection of electric bike before use..................23
Notes about the battery and charger...................................23
Battery.......................................................................................................23
Charger.................................................................................................... 24
Everyday use and inspection of electric bike ..................25
Bicycle inspection and care.........................................................25
Lubricating the e-bike .................................................................... 26
Riding technology........................................................... 27
Troubleshooting .............................................................. 30
An electric bicycle is an electrically power - assisted bicycle, equipped with pedals and an
auxiliary electric motor, which cannot be propelled exclusively by means of this auxiliary
electric motor.
Compared with a bicycle, an electric bicycle adds a motor, controller, charger, and battery.
When riding, electric energy will help you to pedal easier and save energy.
Items in carton
When you open the carton, please check if the following items are inside. If they are not,
then please contact a service agent.
Electric Bicycle
Battery
Charger
Pedal
Manual
Accessory
Tools Bag
1 pc
1 set
1 pc
1 pair
1 pc
1 pc
4
ATV08
Safety instructions
and notes
Safety instructions and notes
ICON EV Manual Safety instructions and notes ATV08 5
Safety instructions
• Do not operate this electric bike without
carefully reading the Manual and
understanding the performance of
the electric bike. Do not lend it to
someone who can manipulate it.
• Preparations before riding: wear your
helmet, gloves and other protective gear
before riding to protect yourself from
damage in case of an accident.
• We highly recommend that you observe
traffic rules and regulations when using
this electric bike. Passengers can not be
carried. When riding in rainy, snowy or
slippery conditions reduce your speed
and increase the distance between
yourself and other vehicles.
• Cycling conditions: ambient temperature
of 14 to 105F, no wind and flat roads;
without frequent startup and brake, the
general running distance may be 25 to
50mi (according to the battery capacity).
• Maximum load: the maximum load of the bike is
responsibility.
•
running, muddy roads, overload and others, a large
quantity of electric power of the storage battery will
be consumed, thus affecting the continued mileage.
when riding.
• The storage battery needs to be charged an additional
time if it is stored for more than a month.
•
may cause a short circuit that damages the electrical
appliances. Make sure to pay attention!
•
• Scrapped batteries are environmental pollutants and
must be properly discarded.
ICON EV Manual Safety instructions and notes ATV08 6
Notes
The electric bike is designed based on the original bike in combination with the market demand and is a means of
transport with special functions and uses. At the time of purchase, please select and buy a model suitable for your
need. Riders must have skilled riding technique before riding on the roads. For correct use and security, please pay
attention to the following matters:
a.
checking the fastening status of the motor
and rear fork, and if a loose phenomenon is
found, it should be tightened timely.
b. When starting the power supply or meeting a
steep slope, use the Pedal to assist as far as
possible to reduce the starting current
and extend the battery life and continuation
line mileage.
c.
water depth. When water depth is more than
the wheel center, it is likely for the motor to
soak water, thus resulting in failure.
d. Users must use the charger specified by
the manufacturer for charging the storage
battery. When charging, ensure that the
battery and charger are flush.
e.
on the battery box and charger to impede
heat, where a good ventilation environment
should be maintained.
f. Please keep appropriate air pressure inside
the tires, so as to avoid increasing the
resistance when riding, and easily wearing the
tires and deforming the Rim.
g. Riders should abide by traffic rules, and the
riding speed should be controlled below 25mi.
Goods to be carried should not exceed 55lbs.
h. When high-speed running or downhill hard
braking, do not use the front brake to avoid
the center of gravity from moving ahead, thus
resulting in danger.
7
ATV08
Basic structure
and name
Basic structure and name
ICON EV Manual Basic structure and name ATV08 8
1. Frame
2. Seat post
Saddle
4.
5. Across handle Stems
6. Derailleur
7. Brake handle
8. Front fork
Headlight
10. Disc brake
11. Disc brake plate
12. Hub
Rim
14. Tyre
15. Speed sensor
16. Crank
17. Pedal
18. Chain
Back fender
20. Flywheel
21. Motor
22. Front fender
Battery
24. Reflector
25. Side Stand
1.
3.
4.
6. 18.
19.
20.
21.
24.
23.
22.
25.
7.
8.
9.
10.
11.
16.
17.
13.
14.
12.
5. 15.
2.
9
ATV08 Assembly method and requirements
Assembly method
and requirements
ICON EV Manual Assembly method and requirements ATV08 10
Installation of Headlight
Close the whole power supply, avoid the positive
and negative pole of the lamp wire from short-
circuit, install the headlight, and do not pull the
headlight, in order to avoid the lamp wire shedding,
causing unnecessary trouble.
1. Take out the Headlight and the front fender;
2. Align the hanger of the front fender with the hole
bolt inside the screw hole of the Front fork with
10mm opening wrench, and tighten the bolt.
Installation of Front fender
1. Take out the front fender, and fix the fender
hanger and Headlightrack on the Front fork
2.
fender stick on the corresponding positions
at both sides of the Front fork with the cross
screwdriver, and tighten the bolts, as shown.
When the lifting ear of the front fender is installed,
place the fender up as much as possible so as to
avoid interfering with the front tire.
Installation of Headlight and front fender
Headlightrack
Front fender hanger
and Ø6 flat gasket
Indice
