ICON QCon Manuale utente
N1630
User manual
MIDI/Audio control surface with motorized
faders for production
WARNING: To reduce the risk of fire or electric shock, do not expose this unit to
rain or moisture
Important Safety Instructions
1. Read this manual thoroughly before using this unit.
2. Keep this manual for future reference.
3. Take notice of and comply with all warnings included in the user's manual or indicated
on the appliance.
4. Follow all instructions included in this manual.
5. Do not expose this unit to rain or moisture. Avoid having water or other liquids spilled
on this unit.
6. When cleaning the cabinet or other parts of this appliance, use only a dry or slightly
damp soft cloth.
7. Do not block any ventilation openings or interfere with the proper ventilation of this unit.
Install in accordance with the manufacturer's instructions.
8. Do not use or store near any heat sources such as radiators, heat registers, stoves, or
other heat-producing appliances.
9. Do not interfere with the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type plug h
as two blades and a third grounding prong. These are designated for your safety. If the
provided plug does not fit into your outlet, consult an electrician.
10. Protect the power cord from being walked on or otherwise damaged by items placed
on or against them. Particular attention should be given to the plugs, receptacles, and
the point where the cord exits the appliance.
11. To avoid the risk of electrical shock, do not touch any exposed wiring while the unit is
in operation.
12. Only use attachments/accessories specified by the manufacturer.
13. Unplug this unit and all connected electrical equipment during lightning storms or when
left unused a long period of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
appliance has been damaged in any way or fails to operate normally.
Contents
Introduction
What's in the package
Features
TM
Installing iMap Software for Windows
Qcon Pro
Qcon Pro Connections
(Umix 1008 Satellite installed)
Top Panel Layout
Front Panel Layout
Rear Panel Layout
Getting Started
Connecting Your Qcon Pro Controller
TM
iMap Software for Mac OS X
TM
iMap Qcon Pro software panel
Firmware upgrade
Connections
Specifications
Services
2
1
1
3-6
7
7
8
9
9-10
11
11
12
13
14
15
Introduction
Please write your serial number here for future reference:
Purchased at:
Date of purchase:
Thank you for purchasing the ICON Qcon Pro Midi/Audio control surface. We sincerely trust
this product will provide years of satisfactory service, but if anything is not to your complete
satisfaction, we will endeavor to make things right.
In these pages, you'll find a detailed description of the features of the Qcon Pro, as well as
a guided tour through its front and side panels, step-by-step instructions for its setup and
use, and full specifications.
You'll also find a warranty card enclosed - please don't forget to fill it out and mail it so that
you can receive online technical support at: www.icon-global.com. And so we can send you
updated information about these and other ICON products in the future. As with most
electronic devices, we strongly recommend you retain the original packaging. In the
unlikely event the product must be returned for servicing, the original packaging (or
reasonable equivalent) is required.
With proper care and adequate air circulation, your Qcon Pro will operate without any trouble
for many years. We recommend that you record your serial number in the space provided
below for future reference.
What's in the package?
Qcon Pro USB-MIDI Controller x 1pc.
AC adaptor x 1pc
Software CD / User’ Manual x 1
Quick Start Guide x 1
USB2.0 Cable x 1
1
Features
8 touch-sensitive motorized channel faders
12-segment LED channels level metering
1 touch-sensitive motorized fader for master channel
8 x dual function encoder knobs (Enter & rotate)
11-segment LED surrounding the encoders to indicate the rotating position.
Large backlit LCD to display channel name, control values etc. for each channel
12-segment LED display showing time location of your project in either SMPTE
or BBT format.
18 assignable buttons
Jog wheel shuttle for fast search and control
Illuminated buttons for each channel including Rec-enable, Solo, Mute, Select
and Monitor
6 illuminated transport buttons including Play, Stop, Rec, Rewind, Fast forward
and Loop
Illuminated zoom key with 4 direction keys
9 illuminated assignable MIDI function buttons
Expandable to 32-channels control surface with 3units of Qcon EX.
Expansion slot for ICON's “Umix” series USB audio interface card
User A & User B RCA connectors for connecting with pedals
Class-compliant with Windows XP, Vista (32-bit), Windows 7 (32-bit & 64-bit),
and Mac OS X (IntelMac)
USB 2.0 high speed connectivity
Mackie control build-in for Cubase, Nuendo, Samplitude, Logic Pro and Abelton Live.
Mackie HUI protocol build-in for Pro Tool.
User self-define mode (MIDI Learn) for other DAW such as Sonar.
Firmware upgrade available simply via USB connection and iMap software.
Template labels are included for difference popular DAW such as Cubase, Nuendo,
Samplitude, Logic Pro and Abelton Live .
Robust aluminum and metal casing with Kensington lock port
2
Top Panel Layout
Note: Function operates slightly difference between DAWs. Please refer to your DAW
manual for each function and overlap the provided labeling template according to your
current using DAW. The following description is based on the functions that operate in
TM
Apple Logic .
LCD backlit display
The two-line backlit LCD display shows the parameter values as you adjust them
and also provides feedback about channel selections, operating modes, and more.
Channel faders
The eight 100mm motorized faders are generally used for controlling the track
volume of your DAW. Depending on your DAW, you may use the “Flip” button to
switch the function of these faders to change other settings. They are all touch
sensitive to allow override automation the moment you touch a fader. Also, they
are motorized; they will automatically move to reflect the current level of the
selected channels in your DAW application. Any automation recorded in a project
will be reflected by the fader positions. Any parameter adjustments made with
these faders will be displayed directly above on the LCD display.
Master fader
This 100mm motorized fader operates the same as the other 8 faders. It controls
your DAW software's master channel fader. Any parameter adjustments made
with this fader will be displayed directly above on the LCD display.
1
2
3
3
17
6
5
4
2
3
8a
8b
8c 8d
8f
9a
9b
10
8e
Channel level metering
The 12-led showing the associated channel level.
Dual function encoders
The dual functioned encoder acting as a push-button and a rotary control.
When an encoder is pressed, it may be used to change modes of operation or to
change what appears in the display above the channel strips. When an encoder
is rotated, depending on its assigned function, it can be used to adjust a channel's
pan, send level, or plug-in parameters.
Encoder LED
The 11-LED surrounding the encoder lights up to indicate the relative position
of the rotation without having to look at your computer.
Time display
This display shows the time location of your project in either SMPTE or BBT format.
Control buttons
4
5
6
7
8a)
8
8b)
4
Recording channel control buttons section
REC buttons - Activate and deactivate the recording state of the associated
channel. The switch will light red when the channel is armed.
SOLO buttons -Turn On and Off the solo state of the associated channel. The
switch will light green when the channel solo state is on and other channels will
be muted. You could solo multiple channel by pressing SOLO buttons on additional
channels.
MUTE buttons - Activate and deactivate the mute state of the associated channel.
The switch will light blue when the channel is muted.
SEL buttons -The SEL buttons activate the associated channels in the DAW software
in order to perform a specific operation (for example, when adjusting EQ with the
ASSIGNABLE ENCODERS, the SEL switch will be used to choose the channel you
want to adjust). When a channel is selected, the associated SEL switch's red LED
will light up.
Motorized fader control buttons section
LOCK button - Activate to lock all motorized faders.
FLIP button - Press the FLIP button to swap the parameter settings of the
motorized faders and the rotary encoder knobs.
UP button - Shift “one” channel up for all faders (except the master channel).
DOWN button - Shift “one” channel down for all faders (except the master channel).
BANK UP button - Shift “eight” channels up for all faders (except the master channel).
BANK DOWN button - Shift “eight” channels down for all faders (except the master
channel).
Zoom control buttons section
ZOOM button - The ZOOM button is typically used in conjunction with the ARROW
buttons described below to zoom in and out within windows in the DAW application.
UP button - The UP button is used to navigate (up movement) through the
Graphical User Interface (GUI) of the DAW application.
DOWN button -The DOWN button is used to navigate (down movement) through
the Graphical User Interface (GUI) of the DAW application.
LEFT button - The LEFT button is used to navigate (left movement) through the
Graphical User Interface (GUI) of the DAW application.
RIGHT button - The RIGHT button is used to navigate (right movement) through
the Graphical User Interface (GUI) of the DAW application.
8c)
8d)
8e)
8f)
5
Jog wheel section
Jog wheel -The jog wheel is used for various purposes specific to the DAW
application, including shuttle and scrubbing functions.
Scrub button -The SCRUB button is typically used in conjunction with the jog
wheel to scrub selected audio tracks for editing and auditioning purposes.
Transport control buttons section
PLAY button -Activate the play function of the DAW.
STOP button -Activate the stop function of the DAW.
REC button -Activate the record function of the DAW.
REWIND button -Activate the rewind function of the DAW.
FAST FORWARD button - Activate the fast forward function of the DAW.
LOOP button -Activate the loop function of the DAW.
Marker button -Toggle small Marker mode.
Nudge - Toggle small Nudge mode.
Click - Toggle playback or record metronome click.
Drop - Toggle Drop.
Replace - Toggle Replace.
Solo - Toggle track solo (of selected track).
DAW Selector section
Qcon Pro has built-in Mackie Control protocols & HUI for different DAW such as
TM TM TM TM TM
Cubase , Samplitude , Abelton Live , Logic Pro and ProTool By selecting the
correct DAW and Mackie control (HUI) protocol, Qcon Pro has automatically
mapped the major functions and work seamlessly with that DAW.
<< / >> buttons -These arrow buttons are used to scroll through the DAW list.
The name of the DAW will display on the LCD.
DAW button - Press to enter the DAW selection.
To change your Qcon Pro DAW mode, turn off and on the power switch to enter
the DAW selection mode. Select your desired DAW from the list with the
“<<” / “>>” buttons.
Tips: DAW button could not be activated if a DAW software is running.
(Note: We will update Qcon Pro firmware from time to time to support additional DAW apart from
the current existing list. Please check our official website to download and upgrade your Qcon Pro
firmware).
Tips: Qcon Pro will memorise your last selected DAW mode and re-enter the same mode a few
seconds after it has been switched on. (i.e. DAW mode selection is not needed if the last mode is
being used.)
Sub-control buttons
This section of control buttons varies in different DAWs. Qcon Pro is based on
TM
Logic for the settings.
(Note: For different DAWs the labeling may not be perfectly matched.)
9
9a)
9b)
10
6
Assignment section
TRACK button -Activate the track parameters of the software.
PAN/EQ/Send/Plug-in/Instrument buttons -These buttons are used to activate
the corresponding effect function of the DAW. They are typically used in
conjunction with the rotary encoder knobs. Press the button, its light will turn
on, and then rotate the rotary encoder knob to adjust the value, which will
display on the LCD directly above.
Automation section
GROUP - Press to enter “Group” edit mode.
READ/Off button - Press the READ button to activate the read function of the
current audio track.
WRITE button - Press the WRITE button to activate the write function of the
current audio track.
TOUCH button - Press to set selected track's automation to Touch.
LATCH - Press to set selected track's automation to Latch.
TRIM - Currently unassigned.
User-defined control buttons
This section of control buttons is user-defined in Mackie control mode (HUI mode).
You may set their parameters according to your personal needs. PVC labeling
mask is included for noting the set parameters.
Front Panel Layout
Monitor HP 1 / HP 2 headphone outputs
Each of these output jacks accepts a standard 1/4" stereo TRS headphone connector.
Monitor HP 1 / HP 2 headphone level controls
Each of these potentiometers controls the output level of its associated
headphone output.
(Note: These outputs and control knobs will not be functional unless Umix 1008 Satellite
USB2.0 audio interface add-in card installed.)
Rear Panel Layout
Umix1008 Satellite 10x8 (24-bit/192kHz) USB2.0 high-speed audio
interface add-in card slot
Expansion slot for connecting Umix 1008 Satellite 10x8 (24-bit/192kHz) USB2.0
high-speed audio interface add-in card.
User A / User B RCA connectors
These RCA connectors are able to connect to foot pedals to activate your selected
functions. To set their parameters, select USER A and USER B parameters at Mackie
control mode.
USB port
Connect your Qcon Pro to your Mac/PC via this USB port.
12V/5A power adaptor
Connect the provided power adaptor here.
(Note: Qcon Pro is not able to work without the provided power adaptor connected.
The USB bus power is not able to provide sufficient power supply for Qcon Pro.)
1
2
1
2
3
4
7
1
2
1
34
2
Altri manuali per QCon
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali ICON Apparecchiature di registrazione
ICON
ICON Satellite UMIX1008 Manuale utente
ICON
ICON PLATFORM-M Manuale utente
ICON
ICON G-BOARD Manuale utente
ICON
ICON iPAD Manuale utente
ICON
ICON QCon Manuale utente
ICON
ICON CUBE 4 Nano Manuale utente
ICON
ICON QCon Pro G2 Manuale utente
ICON
ICON P1-NANO Manuale utente
ICON
ICON Umix 1008 Satellite Manuale utente
ICON
ICON QCon Pro Xs Manuale utente
ICON
ICON QConEX Manuale utente
ICON
ICON U-Solo Live Manuale utente
ICON
ICON i-Controls Pro Manuale utente
ICON
ICON Pro Audio UPorts2 Dyna Manuale utente
ICON
ICON Cube 2nano Manuale utente
ICON
ICON PLATFORM NANO Manuale utente
ICON
ICON PLATFORM M Plus Manuale utente
ICON
ICON iKeyboard 4X Manuale utente
ICON
ICON Cube G Manuale utente
ICON
ICON UMIX1010 RACK Manuale utente
Manuali Apparecchiature di registrazione popolari di altre marche
Strymon
Strymon NIGHTSKY Manuale utente
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente
Tews Technologies
Tews Technologies TPMC465 Manuale utente
Honeywell
Honeywell Excel 50 Manuale utente
SeaLevel
SeaLevel COMM+8.LPCI Manuale utente
Arturia
Arturia AUDIOFUSE STUDIO Manuale utente
