ICP DAS USA TouchPAD TPD Series Istruzioni operative
TPD/VPD Series Getting Started v.1.0.1 I
Copyright@ 2011 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
.
TouchPAD
TPD/VPD Series HMI Devices
Programming Guide
Version: 1.0.5 April 2012
Usage information for
TPD-280
TPD-280U
TPD-283
TPD-430
TPD-430-EU
VPD-130
VPD-130N
TPD/VPD Series - Getting Started v.1.0.5 I
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
Warranty
All products manufactured by ICP DAS are under warranty
regarding defective materials for a period of one year, beginning
from the date of delivery to the original purchaser.
Warning
ICP DAS assumes no liability for any damage resulting from the
use of this product. ICP DAS reserves the right to change this
manual at any time without notice. The information furnished by
ICP DAS is believed to be accurate and reliable. However, no
responsibility is assumed by ICP DAS for its use, nor for any
infringements of patents or other rights of third parties resulting
from its use.
Copyright
Copyright @ 2012 by ICP DAS CO., LTD. All rights are reserved.
Trademarks
Names used for identification only may be registered trademarks
of their respective companies.
Contact US
If you have any questions, please feel free to contact us.
We will give you a response within about two working days.
Email: service@icpdas.com
TPD/VPD Series - Getting Started v.1.0.5 II
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
Table of Contents
Chapter 1. Introduction ............................................................. 1
1.1 Hardware Specifications ......................................................................2
1.2 Hardware Overview.............................................................................3
Chapter 2. Software Installation................................................. 7
2.1 Install the HMIWorks Software............................................................7
2.2 Create a New Project ...........................................................................8
2.3 HMIWorks Working Environment ......................................................10
2.4 Downloading Methods for TouchPAD................................................11
Chapter 3. Demo Programs ...................................................... 14
3.1 Demo 0 (Beep & Count, using Ladder Designer).................................14
3.1.1 HMI Page Design................................................................................................. 15
3.1.2 Device Setup (TouchPAD)................................................................................... 24
3.1.3 Download a Project ............................................................................................ 25
3.2 Demo 1 (Beep, Timer, Counter)..........................................................26
3.2.1 HMI Page Design................................................................................................. 26
3.2.2 Device Setup (TouchPAD)................................................................................... 33
3.2.3 Download a Project ............................................................................................ 34
3.3 Demo 2 (Remote I/O: Light, Temperature, Communication Detector)35
3.3.1 HMI Frame Design .............................................................................................. 36
3.3.2 Editing an LD Program using “Ladder Designer” ................................................ 45
3.3.3 Device Setup (TouchPAD)................................................................................... 48
3.3.4 Download the Project......................................................................................... 48
3.4 Demo 3 (Multi HMI with ISaGRAF PAC: Light, Temperature,
Communication Detector) ....................................................50
3.4.1 HMI Frame Design .............................................................................................. 52
3.4.2 Using “Ladder Designer” to edit an LD Program ................................................ 57
TPD/VPD Series - Getting Started v.1.0.5 III
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
3.4.3 Device Setup (TouchPAD)................................................................................... 60
3.4.4 Download the Project......................................................................................... 62
3.5 Demo List...........................................................................................64
Appendix A. Downloading Information ..................................... 65
Appendix B. Configuring the I/O Module ................................... 66
Appendix C. Creating Your Own GUI.......................................... 71
Appendix D. Configuring and Programming the ISaGRAF PAC .... 72
Appendix E. Displaying the Decimal Point.................................. 75
Appendix F. Using USB to Download a Program......................... 77
TPD/VPD Series - Getting Started v.1.0.5 Page 1
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
Chapter 1. Introduction
The TPD-280/280U/283/430/430-EU and VPD-130/130N devices are part of the
TouchPAD series that includes a tiny touch HMI interface and are designed for building
and home automation. The TouchPAD series is equipped with a high resolution TFT color
touch screen and can be installed using a regular electrical wall-mount outlet. The
TouchPAD series can also be seamlessly integrated with rich I/O modules and provides a
beautiful, flexible and customized screen display. In short, the TouchPAD series is the best
choice when upgrading from the mechanical switches to intelligent control pads.
For PLC users, the HMIWorks utility includes Ladder Designer, and for IT users, a C
language environment is provided. It takes less than 30 minutes to learn how to create an
application for a TouchPAD device when using Ladder Designer. ICP DAS also provides
redundant solutions for TouchPAD HMI devices in our PoE version, TPD-283. With all the
features provided, TouchPAD touch HMI devices are possibly the most cost-effective HMI
device solution that has been created.
Note: The usage of the TPD-280U, TPD-430 and TPD-430-EU is the same.
TouchPAD
：
TPD Series
（2.8”Touch Screen）
TPD Series
（4.3”Touch Screen）
VPD Series
（3.5”Touch Screen）
TPD/VPD Series - Getting Started v.1.0.5 Page 2
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
1.1 Hardware Specifications
If you are interested in learning more about the hardware specifications for the various
TouchPAD models, please refer to our website:
www.icpdas.com.tw > Product > Solutions > HMI & Touch Monitor > TouchPAD
or
http://www.icpdas.com.tw/product/solutions/hmi_touch_monitor/touchpad/touchpad_
selection.html
TPD/VPD Series - Getting Started v.1.0.5 Page 3
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
1.2 Hardware Overview
TPD Series
TPD-280:
TPD-280U:
Rotary Switch (0 ~ 9)
0: Run Only
1: Update Only
Power/GND/RS-485
2.8”TFT LCD with Touch Panel
USB
0: Run
1: Update OS
9: Update AP
TPD/VPD Series - Getting Started v.1.0.5 Page 4
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
TPD-283:
Reset TouchPAD Button
Open the Top Cover
Reset Button
Ethernet (PoE)
Rotary Switch (0 ~ 9)
0: Run and Update
1: Force Update (When the program is damaged)
2: Run Only
TPD/VPD Series - Getting Started v.1.0.5 Page 5
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
TPD-430; TPD-430-EU:
The difference between the TPD-430 and the TPD-430-EU is the size of the appearance,
which is divided into U.S. gauge and European gauge.
TPD-430:
TPD-430-EU:
4.3”TFT LCD with Touch Panel
Speaker
Programmable LED Indicator
Reset Button (Left hand Side)
USB
Rotary Switch (0 ~ 9) 0: Run
1: Update OS 2: Update AP
USB
Power/GND/RS-485
TPD/VPD Series - Getting Started v.1.0.5 Page 6
Copyright@ 2012 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
VPD Series
VPD-130: VPD-130N:
3.5”TFT LCD with Touch Panel
LED Indicator
Rubber Keypad
USB
Power/GND
RS-485
Data- Data+
RS-232
TxD RxD GND
Rotary Switch (0 ~ 9)
0: Run
1: Update OS
9: Update Program
Reset Button
Questo manuale è adatto per i seguenti modelli
8
Indice
Altri manuali ICP DAS USA Pannello touch
ICP DAS USA
ICP DAS USA SmartView TPM-4100 Manuale utente
ICP DAS USA
ICP DAS USA SmartView TPM-4100 Manuale utente
ICP DAS USA
ICP DAS USA SmartView TP-4100 Manuale utente
ICP DAS USA
ICP DAS USA SmartView TPM-4100 Manuale utente
ICP DAS USA
ICP DAS USA TPD-280 Manuale utente
ICP DAS USA
ICP DAS USA TPD-703 Manuale utente
ICP DAS USA
ICP DAS USA TPD-280 Manuale utente
ICP DAS USA
ICP DAS USA TPD-433-H Manuale utente
ICP DAS USA
ICP DAS USA SmartView TPM-4100 Manuale utente
