Icron USB 2.0 Ranger Series Manuale utente

USB 2.0 Ranger 140
and USB 2.0 Ranger 440
User Guide
USB 2.0 Ranger 440 Model Shown
powered by ExtremeUSB®

USB 2.0 Ranger 140 and USB 2.0 Ranger 440
Thank you for purchasing the USB 2.0 Ranger. Please read this guide
thoroughly before installation.
This document applies to Part Numbers:
• 00-00185 through 00188. (Ranger 140)
• 00-00208 through 00212. (Ranger 440)
FCC Radio Frequency Interference Statement Warning
The USB 2.0 Ranger 140 and USB 2.0 Ranger 440 have been tested and
found compliant with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when installed and operated in a
commercial environment. The USB 2.0 Ranger 140 and 440 generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with this user guide, may cause harmful interference to radio
communications. Operation of the USB 2.0 Ranger 140 or 440 in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
CE Statement
We, Icron Technologies Corporation, declare under our sole responsibility
that the USB 2.0 Ranger, to which this declaration relates, is in conformity
with European Standard EN 55022/A1 Class A, and EN 50082-1 (IEC 801-
2, IEC 801-3, IEC 801-4)
IC Statement
These Class A digital apparatus complies with Canadian ICES-003.
©2006 Icron Technologies Corporation. All rights reserved. Icron
Technologies Corporation, the Icron Technologies Corporation logo, and the
Icron Technologies Corporation products referred to herein are either the
trademarks or the registered trademarks of Icron Technologies Corporation.
All other trademarks are property of their respective owners. Icron
Technologies Corporation assumes no responsibility for errors that may
appear in this manual. Information contained herein is subject to change
without notice.

User Guide
Contents
Introduction................................................................................................ 1
USB 2.0 Ranger Product Contents............................................................. 1
About the USB 2.0 Ranger 140 and Ranger 440 ....................................... 3
Before You Begin ...................................................................................... 7
Installing the LEX unit............................................................................... 7
Installing the REX unit .............................................................................. 7
Connecting the LEX unit to the REX unit ................................................. 7
Checking the Installation............................................................................ 8
Connecting a USB Device ......................................................................... 8
Troubleshooting....................................................................................... 10
Specifications........................................................................................... 12
Limited Hardware Warranty .................................................................... 14
Hardware Remedies................................................................................. 14
Limitation of Liability.............................................................................. 14
Obtaining Warranty Service..................................................................... 15
Contacting Technical Support.................................................................. 15
i

USB 2.0 Ranger 140 and USB 2.0 Ranger 440
Notes
ii

User Guide
Introduction
This manual is intended to assist IT professionals install the USB 2.0 Ranger
models 140 or 440. The instructions in this guide assume a general
knowledge of computer installation procedures, familiarity with cabling
requirements, and some understanding of USB devices. The USB 2.0 Ranger
reference used for the remainder of this document applies to either the 140 or
440 model.
NOTE:Notes give additional information that could make installation
easier.
USB 2.0 Ranger Product Contents
When you open your USB 2.0 Ranger for the first time you should find the
following items:
• USB 2.0 Ranger User Guide
• Local EXtender (LEX) unit.
• Remote EXtender (REX) unit.
• AC power adapter (2)
• USB cable (2m long)
To complete the installation, you will also require the following items that
are not included with the product:
• USB 2.0 compatible computer
• USB device
• Category 5 Unshielded Twisted Pair (UTP) solid core cable with
two RJ45 connectors (if using surface cabling),
OR,
Category 5 UTP cabling with two information outlets and two
Category 5 UTP patch cords with RJ45 connectors (if using
premise cabling)
NOTE: The maximum length of the Category 5 UTP cable must not exceed
50m. If Cat-5 patch cable is used, total length should not exceed
10m (EIA/TIA-568 specification).
NOTE: All references to Category 5 UTP solid core cable in this document
represent the minimum requirement. Category 5E, Category 6 or
better UTP or STP cable may be substituted.
1

USB 2.0 Ranger 140 and USB 2.0 Ranger 440
NOTE: Use only the AC adapters supplied with the USB 2.0 Ranger. The
DC supply voltage used on the Ranger 140 or Ranger 440 units is
NOT the same as Icron Technologies USB 1.1 Ranger products.
Use of substitute adapters may cause permanent damage to the
system and will void the warranty.
2

User Guide
About the USB 2.0 Ranger 140 and Ranger 440
The USB 2.0 Ranger is powered by Icron’s ExtremeUSB® technology. This
technology breaks the five-meter distance barrier for the connection of USB
peripheral devices and allows users to enjoy the benefits of USB technology
beyond the desktop. With the USB 2.0 Ranger, USB devices can be located
up to 50 meters from the host computer.
The USB 2.0 Ranger is composed of two individual units; the LEX unit and
the REX unit.
The LEX unit: USB 2.0 Ranger 140 and USB 2.0 Ranger 440
The LEX unit connects to the host computer using a conventional
USB cable. It also connects to a power outlet through an AC power
adapter. The LEX unit connections are the same for both the 140 and
440 models.
Front
View
1
2
5
64
3
1Host LED
2Host Port (USB Type B)
3Link LED
4Link Port (RJ45)
5Power LED
6Power connector
3

USB 2.0 Ranger 140 and USB 2.0 Ranger 440
The USB 2.0 Ranger 140 REX unit
The Ranger 140 REX unit provides a single USB device connection
at the remote end. Connection to the USB device is via a conventional
USB cable. Additional devices may be connected through attachment
of a USB Hub at the REX unit. The REX unit is required to be
connected to a power outlet through an AC power adapter.
Front
View
2
1 3
4
Rear
View
6
5
1Link LED
2Link Port (RJ45)
3Power LED
4Power connector
5Device LED
6Device Port (USB Type A)
4

User Guide
The USB 2.0 Ranger 440 REX Unit
The Ranger 440 REX unit integrates a USB Hub and provides four
USB device connections the remote end. Connection to the USB
device is via a conventional USB cable. Additional devices may be
connected through attachment of a USB Hub at the REX unit. The
REX unit is required to be connected to a power outlet through an AC
power adapter.
Front
View
6
5
Rear
View
3
4
5
6
5
6
5
6
5
6
1Link LED
2Link Port (RJ45)
3Power LED
4Power connector
5Device LED
6Device Port (USB Type A)
5

USB 2.0 Ranger 140 and USB 2.0 Ranger 440
Network Cabling
The LEX unit and REX unit are interconnected by up to 50 meters of
Category 5 Unshielded Twisted Pair (UTP) cabling. The UTP cabling
must have a straight-through conductor configuration, with no
crossovers, and must be terminated with 8-conductor RJ45 connectors
at both ends.
Category 5 cable
USB USB
LEX REX
cable cable(s) USB
device(s)
computer
AC power adapters
NOTE:Category 5 UTP cabling is the standard data communications cable
installed in most commercial and some residential buildings.
USB Cables
USB cables have two distinct connectors. The Type A connector is used to
connect the cable from a USB device to the Type A port on a computer or
hub. The Type B connector is used to attach the USB cable to a USB device.
USB Type A
port USB Type A
connector USB Type B
port USB Type B
connector
Compatibility
The USB 2.0 Ranger complies with USB 2.0 specifications governing the
design of high-speed USB devices. However, Icron Technologies
Corporation does not guarantee that all USB devices are compatible with the
USB 2.0 Ranger.
6
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Icron Adattatore


















