iDataLink Maestro RR Manuale utente
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
Pressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced
options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE
1
2
3
SELECT VEHICLE
PRINT PAGES NEEDED
2020
ToyoTa 4 RunneR
WiTh JBL
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, BACKUP CAMERA, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here
in are the properties of their respective owners.
PRODUCTS REQUIRED
iDatalink Maestro RR or RR2 Radio Replacement Interface
iDatalink Maestro HRN-RR-TO3 Installation Harness
PROGRAMMED FIRMWARE
ADS-RR(SR)-TOY03-AS
ADDITIONAL RESOURCES
Maestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-TOY03-AS-IG-EN maestro.idatalink.com
ToyoTa 4 RunneR WiTh JBL 2020
Automotive Data Solutions Inc. © 2020 2
NEED HELP?
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Troubleshooting Table 5
WELCOME
Congratulations on the purchase
of your iDatalink Maestro RR Radio
replacement solution. You are
now a few simple steps away from
enjoying your new car radio with
enhanced features.
Before starting your installation,
please ensure that your iDatalink
Maestro module is programmed
with the correct firmware for your
vehicle and that you carefully review
the install guide.
Please note that Maestro RR will
only retain functionalities that
were originally available in the
vehicle.
1 866 427-2999
maestro.idatalink.com/support
www.12voltdata.com/forum
ADS-RR(SR)-TOY03-AS-IG-EN maestro.idatalink.com
ToyoTa 4 RunneR WiTh JBL 2020
Automotive Data Solutions Inc. © 2020 3
INSTALLATION INSTRUCTIONS
STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires shown on the next page from
aftermarket radio main harness to the TO3 T-harness
and match the wire functions (Note: Rear speaker wire
connections are not required).
• Remove the factory radio.
STEP 2
• Connect the factory harness to the TO3 T-harness.
STEP 3
• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the backup camera RCA cable into the
aftermarket radio (if equipped).
• Connect the auxiliary cables into the aftermarket radio (if
equipped).
• Plug the steering wheel control cable into the aftermarket
radio.
STEP 4
• Connect all the harnesses to the Maestro RR module then
test your installation.
1
ADS-RR(SR)-TOY03-AS-IG-EN maestro.idatalink.com
ToyoTa 4 RunneR WiTh JBL 2020
Automotive Data Solutions Inc. © 2020 4
AUXAUX
2
BACKUP CAMBACKUP CAM
YELLOW - 12V (+)
BLACK - GROUND
RED - ACCESSORY (+)
ORANGE - ILLUMINATION (+)
PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEED
LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAIN
HARNESS
FACTORY RADIO HARNESS
TO3 T-HARNESS
STEP 1
STEP 2
STEP 3
WIRES FROM
VEHICLE
GREEN - LR SPEAKER (+)
GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
PURPLE - RR SPEAKER (+)
STEP 4
NOT REQUIRED
N.C.
MAESTRO RR MODULE
RCA CABLES
WHITE
WHITE/BLACK
GRAY
GRAY/BLACK
LF RCA INPUT
RF RCA INPUT
CONNECTIONS
NOT
REQUIRED
WITH AMP
AUDIO
CABLE
DATA
CABLE
STEERING WHEEL
CONTROL CABLE
CONNECT TO
AFTERMARKET RADIO
WIRING DIAGRAM with JBL
CONNECT
IF
THERE IS
A MATCH
ADS-RR(SR)-TOY03-AS-IG-EN maestro.idatalink.com
ToyoTa 4 RunneR WiTh JBL 2020
Automotive Data Solutions Inc. © 2020 5
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
When a button on the steering wheel is pressed, the light on the Maestro
module blinks but the radio does not respond.
Ensure the blue 4-pin steering wheel control cable is connected between the
maestro and the radio (the radio will use either the 3.5mm jack or the Blue/
Yellow wire, not both).
Refer to radio’s owners manual to verifie if the radio has this function:
Steering Wheel Control (ON/OFF) : choose ON.
or
Steering Wheel Control (Custom/Preset): choose Preset
The light on the Maestro is flashing RED ONCE. There is no firmware on the module; flash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.
Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will flash RED rapidly (this may
take up to 10 seconds).
Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: maestr[email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest firmware from the manufacturer. Please visit the radio
manufacturer’s website and look for any updates pertaining to your radio.
2020
ToyoTa 4 RunneR
WiThouT JBL
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, BACKUP CAMERA, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here
in are the properties of their respective owners.
PRODUCTS REQUIRED
iDatalink Maestro RR or RR2 Radio Replacement Interface
iDatalink Maestro HRN-RR-TO3 Installation Harness
PROGRAMMED FIRMWARE
ADS-RR(SR)-TOY03-AS
ADDITIONAL RESOURCES
Maestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-TOY03-AS-IG-EN maestro.idatalink.com
ToyoTa 4 RunneR WiThouT JBL 2020
Automotive Data Solutions Inc. © 2020 2
NEED HELP?
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Troubleshooting Table 5
WELCOME
Congratulations on the purchase
of your iDatalink Maestro RR Radio
replacement solution. You are
now a few simple steps away from
enjoying your new car radio with
enhanced features.
Before starting your installation,
please ensure that your iDatalink
Maestro module is programmed
with the correct firmware for your
vehicle and that you carefully review
the install guide.
Please note that Maestro RR will
only retain functionalities that
were originally available in the
vehicle.
1 866 427-2999
maestro.idatalink.com/support
www.12voltdata.com/forum
ADS-RR(SR)-TOY03-AS-IG-EN maestro.idatalink.com
ToyoTa 4 RunneR WiThouT JBL 2020
Automotive Data Solutions Inc. © 2020 3
INSTALLATION INSTRUCTIONS
STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut and remove the front speaker wire junction connectors.
• Connect the wires shown on the next page from
aftermarket radio main harness to the TO3 T-harness
and match the wire functions (Note: Rear speaker wire
connections are not required).
• Remove the factory radio.
STEP 2
• Connect the factory harness to the TO3 T-harness.
STEP 3
• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the backup camera RCA cable into the
aftermarket radio (if equipped).
• Connect the auxiliary cables into the aftermarket radio (if
equipped).
• Plug the steering wheel control cable into the aftermarket
radio.
STEP 4
• Connect all the harnesses to the Maestro RR module then
test your installation.
2
ADS-RR(SR)-TOY03-AS-IG-EN maestro.idatalink.com
ToyoTa 4 RunneR WiThouT JBL 2020
Automotive Data Solutions Inc. © 2020 4
AUXAUX
2
BACKUP CAMBACKUP CAM
YELLOW - 12V (+)
BLACK - GROUND
RED - ACCESSORY (+)
ORANGE - ILLUMINATION (+)
PURPLE/WHITE - REVERSE LIGHT (+)
PINK - VEHICLE SPEED
LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAIN
HARNESS
FACTORY RADIO HARNESS
TO3 T-HARNESS
STEP 1
STEP 2
STEP 3
WIRES FROM
VEHICLE
CONNECT
IF
THERE IS
A MATCH
GREEN - LR SPEAKER (+)
GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
PURPLE - RR SPEAKER (+)
STEP 4
CUT AND REMOVE
THE SPEAKER WIRE
JUNCTION CONNECTORS
WHITE - LF SPEAKER (+)
WHITE/BLACK - LF SPEAKER (-)
GRAY - RF SPEAKER (+)
GRAY/BLACK - RF SPEAKER (-)
N.C.
MAESTRO RR MODULE
WIRING DIAGRAM without JBL
NOT REQUIRED
AUDIO
CABLE
DATA
CABLE
STEERING WHEEL
CONTROL CABLE
CONNECT TO
AFTERMARKET RADIO
Altri manuali per Maestro RR
12
Altri manuali iDataLink Accessori per automobili
iDataLink
iDataLink Maestro RR Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink ADS-AL-CH4 Manuale utente
iDataLink
iDataLink Maestro RR Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink LADE-AL-TL2-EN Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink ADS-MRR2 Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink Maestro RR Manuale utente
iDataLink
iDataLink SUB9 Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink maestro Rr Manuale utente
iDataLink
iDataLink ADS-TBSL-FM-EN Manuale utente
iDataLink
iDataLink maestro mus1 Manuale utente
