Idatastart TR1150A Manuale utente

OWNER’S

MANUAL

®/MD

HCX/HC1/HC2

INSTRUCTIONS EN FRANÇAIS AU VERSO

FCC COMPLIANCE

This device complies with FCC rules, and is subject to the following conditions:

(1) This device may not cause harmful interference.

(2) This device may accept interference received, including interference that may cause undesired operation.

INDUSTRY CANADA COMPLIANCE

This device complies with the RSS-210 Radio Standards Speciﬁcation from IC.

NOTE: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void

the user’s authority to operate this device.

IDSOG201505

2IDATASTART OWNER’S GUIDE

CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM

WELCOME TO IDATASTART

Congratulations on the purchase of your iDataStart remote start system. Please take a moment to review the

following table of contents to help you quicly access the information you need.

iDataStart remote overview 3

iDataStart remote functions & conﬁrmations 4-6

Programming a new iDataStart remote 6

Replacing iDataStart remote batteries 7

Remote starting from your factory key fob 7

Adjusting engine runtime settings 8

Key takeover following remote start 8

When servicing your vehicle (Valet Mode) 9

Remote start troubleshooting 10

Vehicle shutdown troubleshooting 11

Limited lifetime warranty 12

Headquartered in Montreal, Canada, Automotive Data Solutions Inc. (ADS) is a privately held company specialized in the

development and marketing of remote start and audio integration solutions destined for the automotive aftermarket. ADS’

award-winning products (marketed under the iDatalink®, iDatalink Maestro® and iDataStart® brands) are sold and installed

through a network of Authorized Dealers across North America, South America, Europe and Russia. For more information

about ADS’ products and services, visit www.adsdata.ca.

IDATASTART OWNER’S GUIDE 3

CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM

IDATASTART REMOTE OVERVIEW

Your iDataStart remote start system may include one or both long-range remotes listed below. Please take a

moment to familiarize yourself with their general features.

REMOTE MODEL TR1150A TR2350AC

Technology FM 1-WAY FM 2-WAY

Max. Range 3000 feet 3000 feet

Buttons 5 5

Transmit Conﬁrmation (TX) Top LED Top LED

Receive Conﬁrmation (RX) -- Button LED + Chime

Batteries Required 2 x CR2016 1 x CR2450

Avg. Battery Life 24 months 6-12 months

Warranty 1 year 1 year

TOP LED (TX)TOP LED (TX)

BUTTON LED (RX)

BUTTONBUTTON

CASING

RELEASE

CASING

RELEASE

4IDATASTART OWNER’S GUIDE

CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM

IDATASTART REMOTE FUNCTIONS & CONFIRMATIONS

Thanks to their multiplexing technology, iDataStart remotes can pack over 30 functions using only 5

buttons. In order to get the most out of your remotes, please take a moment to get acquainted with

the following functions below:

NOTES:

1. All functions must be enabled by an Authorized Dealer during installation to be functional on remote

2. Non-highlighted icons = Press & release button

3. Highlighted (grey) icons = Press & hold button for 2.5 seconds

4. Coma (,) between icons = Press buttons one after the other

5. Plus (+) between icons = Press buttons together

6. Timeout between each button press = 3 seconds

7. Function* = Available in 2nd Car Mode

8. Conﬁrmations are only available with 2-way remote

BUTTONS FUNCTION CONFIRMATION 2WAY ONLY FUNCTION DESCRIPTION

Lock & Arm* 1 chime + 1 ﬂash Secures your vehicle by locking the doors

and arming the alarm.

Unlock &

Disarm* 2 chimes + 2 ﬂashes Access your vehicle by unlocking the doors

and disarming the alarm.

Query*

Panic* 1 chime + 1 ﬂash Triggers the panic siren.

AUX 5* To be completed by Authorized Dealer if applicable

Trunk Release Releases the trunk or hatch.

IDATASTART OWNER’S GUIDE 5

CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM

BUTTONS FUNCTION CONFIRMATION 2WAY ONLY FUNCTION DESCRIPTION

Engine Start/

Stop*

4 chimes + 4 ﬂashes

(Button LEDs will also ﬂash

intermittently while engine is

running)

Starts and stops the engine.

,AUX 1 To be completed by Authorized Dealer if applicable

,AUX 2 To be completed by Authorized Dealer if applicable

,AUX 3 To be completed by Authorized Dealer if applicable

,AUX 4 To be completed by Authorized Dealer if applicable

, , *2nd Car Mode

Controls two iDataStart-equipped vehicles

using one remote. Works with all functions

marked with an asterisk (*).

,Silent Lock* Disables the vehicle’s horn and alarm siren

when pressing the ‘Lock’ button.

,Silent Unlock* Disables the vehicle’s horn and alarm siren

when pressing the ‘Unlock’ button.

, + Valet Mode

ON/OFF

1 chime ON

2 chimes OFF

Turns off remote start and security

features when servicing your vehicle or

valet parking. Keyless entry features will

remain functional.

, Runtime Extend Seamlessly extends your engine runtime

without restarting your vehicle.

, + Mute

ON/OFF

1 chime ON

2 chimes OFF

Disables the vehicle’s horn and alarm siren

even when alarm is triggered. Remote will

still receive alarm notiﬁcation.

, + Shock Sensor

ON/OFF

1 chime ON

2 chimes OFF Disables shock sensors if installed.

6IDATASTART OWNER’S GUIDE

CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM

BUTTONS FUNCTION CONFIRMATION 2WAY ONLY FUNCTION DESCRIPTION

, + Ignition Lock

ON/OFF

1 chime ON

2 chimes OFF

Automatically locks doors when engine is

running.

, + Passive Lock &

Arm ON/OFF

1 chime ON

2 chimes OFF

Automatically locks & arms your vehicle 60

seconds after you unlock it.

, + Turbo

ON/OFF

1 chime ON

2 chimes OFF

Cool down your turbo before turning the

engine off. Programmable runtime from 1

to 4 minutes.

, + Weather Start

ON/OFF

1 chime ON

2 chimes OFF

Set your vehicle to automatically remote

start every 2, 3 or 4 hours (programmable)

or from a temp. sensor sold separately.

,,, Lock Remote 1 chime + 1 ﬂashe

Disables all functions on your remote.

Pressing a button will generate 6 chimes +

6 ﬂashes. Available with 2-way remote only.

,,, Unlock Remote 2 chimes + 2 ﬂashes Enables all functions on your remote.

Available with 2-way remote only.

,,, Mute Remote

ON/OFF

1 chime ON

2 chimes OFF

Disables the chime when pressing any but-

ton on your remote. Available with 2-way

remote only.

PROGRAMMING A NEW IDATASTART REMOTE

Are you replacing a lost or damaged remote or simply adding an extra remote to your iDataStart system?

Please take note of the following:

1. A functional iDataStart system must already be installed in your vehicle.

2. All new remotes must be installed by an iDataStart Authorized Dealer.

3. A maximum of 4 remotes can be programmed to your iDataStart system.

IDATASTART OWNER’S GUIDE 7

CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM

REMOTE STARTING FROM FACTORY KEY FOB

Available on most vehicles, your iDataStart system will enable remote start functionality from your factory

key fob as follows:

BUTTON PRESS FUNCTION

3x rapidly Start engine

3x rapidly Stop engine

Remote start range will vary by key fob. If your iDataStart system does not include long range remotes,

you may still add iDataStart remotes (sold separately) at a later date. Ask your iDataStart Authorized

Dealer for details.

Follow the steps below to replace the batteries in your iDataStart remotes OR scan the QR code below to

view a video tutorial.

1. Insert a 25 cent coin into the hollow (bottom left) corner of your iDataStart remote.

2. Gently twist the coin until the casing pops open.

3. Use your coin to pry open the rest of the case perimeter.

4. Carefully temove the circuit board from the case.

5. Slide the old battery out of its enclosure and replace with the new battery.

6. Carefully replace the circuit board into bottom half of the casing.

7. Snap top and bottom casings back together using your hands.

REPLACING IDATASTART REMOTE BATTERIES

8IDATASTART OWNER’S GUIDE

CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM

ADJUSTING ENGINE RUNTIME SETTINGS

Once remote started from your factory key fob or long-range remote, your vehicle will run for the

programmed ‘runtime’ setting. The default runtime is 15 minutes but it can also be programmed for

3, 5, 10, 25, 30 or 35 minutes. If you wish to change your remote start runtime setting, contact your

iDataStart Authorized Dealer.

KEY TAKEOVER FOLLOWING REMOTE START

Available on some vehicles, the ‘key takeover’ procedure ensures that your engine does not turn off

when entering the car during the remote start runtime, following a remote start command. Follow the

instructions below or scan the QR code to view a video tutorial.

For Standard Key Vehicles

1. Unlock and enter vehicle

2. Close doors

3. Insert key into ignition and turn ignition to ON position

4. Press foot brake

For Push-To-Start Vehicles

1. Unlock and enter vehicle with valid smartkey

2. Close doors

3. Press foot brake

NOTE: To prevent your vehicle from shutting down, complete the steps below within the programmed

delay time (45 seconds, 90 seconds, 3 minutes or 4 minutes). Key takeover procedure may vary by

vehicle, ask your iDataStart Authorized Dealer for deatails.

IDATASTART OWNER’S GUIDE 9

CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM

WHEN SERVICING YOUR VEHICLE

To ensure safety during vehicle servicing, the remote starter must be placed in ‘Valet Mode’. The ‘Valet

Mode’ will disable remote start functionality. To activate or deactivate the ‘Valet Mode’, follow the

instructions below or scan the QR codes to view a video tutorial.

With Vehicle Key

FUNCTION ACTION # OF PARKING LIGHT FLASHES

Valet Mode ON Cycle ignition OFF/ON 2x rapidly,

then press brake 3x.

Valet Mode OFF 2

With iDataStart Remote

FUNCTION ACTION # OF PARKING LIGHT FLASHES

Valet Mode ON Turn ignition ON, then press

Valet Mode OFF 2

With iDataStart Antenna

FUNCTION ACTION # OF LED & PARKING LIGHT FLASHES

Valet Mode ON Turn ignition ON, then press

& hold button for 5 seconds

Valet Mode OFF 2

10 IDATASTART OWNER’S GUIDE

CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM

REMOTE START TROUBLESHOOTING

If your iDataStart remote fails to start the vehicle, the parking lights will ﬂash three times immediately,

then ﬂash a number of times according to the errors below:

# OF PARKING LIGHT

FLASHES DIAGNOSTIC SOLUTION

3 + 1 Engine is already running Turn engine OFF

3 + 2 Key in ignition at ON position Remove key from ignition

3 + 4 Trunk is open Close trunk

3 + 5 Foot brake is ON Release foot brake

3 + 6 Hood is open Close hood

3 + 8 Tach failure Contact Authorized Dealer

3 + 10 System is in Valet Mode Exit Valet Mode

3 + 11 Can communication failure Contact Authorized Dealer

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali idatastart Avviamento remoto

idatastart

idatastart VWX000A Manuale utente

idatastart

idatastart OEM-IDS(RS)-BM1-[ADS-BM1]-EN Manuale utente

idatastart

idatastart HC2352AC Manuale utente

idatastart

idatastart HC2352AC Manuale utente

idatastart

idatastart TR3420BF Manuale utente

idatastart

idatastart VW2410A Manuale utente

idatastart

idatastart HC3 Manuale utente

idatastart

idatastart ADS-BZ1 Manuale utente

idatastart

idatastart ADS-BZ1 Manuale utente

idatastart

idatastart CMVWXA0 Manuale utente

idatastart

idatastart HC1151A Manuale utente

idatastart

idatastart HC Manuale utente

idatastart

idatastart ADS-CH4 Manuale utente

idatastart

idatastart BM1 Manuale utente

idatastart

idatastart CMBMXA0 Manuale utente

idatastart

idatastart VW2410A Manuale utente

idatastart

idatastart HC2352AC Manuale utente

idatastart

idatastart COM-IDS(RS)-BM1-EN Manuale utente

idatastart

idatastart CMHCXA0 Manuale utente

idatastart

idatastart COM-IDS(RS)-BZ3-[CMBMXA0]-EN Manuale utente

idatastart

idatastart BM1 Manuale utente

idatastart

idatastart TR2650A Manuale utente

idatastart

idatastart TR2550A Manuale utente

Manuali Avviamento remoto popolari di altre marche

AstroStart

AstroStart 803U Manuale utente

Durite

Durite 0-649-20 Manuale

EINHELL

EINHELL BT-PS 1000 Manuale

Linear

Linear ACCESS AK-21 Specifiche tecniche

Soundstream

Soundstream TARANTULA RS.2 Manuale utente

Jaycar Electronics

Jaycar Electronics MB3752 Manuale utente

Ultra Start

Ultra Start 72 Series Manuale utente

ADS

ADS FLASHLOGIC FLRSVW1 Manuale utente

Selecta

Selecta JS012 Manuale utente

Black Widow Security

Black Widow Security BW RAS 400 Manuale utente

Vector

Vector Power City DK080706 Supplemento

Code Alarm

Code Alarm CA-535 Manuale utente

Ozito

Ozito OJS-800 Manuale utente

Profi-Partner

Profi-Partner 46387 Manuale utente

EZ STARTER

EZ STARTER EZ-45 Manuale utente

Viper

Viper 4204 Manuale utente

Essex Electronics

Essex Electronics KE-1701 Manuale utente

EINHELL

EINHELL EGS 3600 Manuale

idatastart TR1150A Manuale utente

Manuali Avviamento remoto popolari di altre marche