Idis DC-D2233WHX Manuale utente

Network

Camera

Operation Manual

DC-D2233WHX

This is a basic operation manual for use of an IDIS network camera. Users who are using this product for the rst time,

as well as users with experience using comparable products, must read this operation manual carefully before use and

heed to the warnings and precautions contained herein while using the product. Safety warnings and precautions

contained in this operation manual are intended to promote proper use of the product and thereby prevent accidents

and property damage and must be followed at all times. Once you have read this operation manual, keep it at an easily

accessible location for future reference.

•The manufacturer will not be held responsible for any product damage resulting from the use of unauthorized parts and

accessories or from the user’s failure to comply with the instructions contained in this manual.

•The information in this document is believed to be accurate as of the date of publication even though explanation

about some functions may not be incorporated. The manufacturer is not responsible for any problems resulting from

the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this

publication may be issued to incorporate such changes.

•It is recommended that rst-time users of this network camera and individuals who are not familiar with its use seek

technical assistance from their retailer regarding product installation and use.

•If you need to disassemble the product for functionality expansion or repair purposes, you must contact your retailer and

seek professional assistance.

•Both retailers and users should be aware that this product has been certied as being electromagnetically compatible for

commercial use. If you have sold or purchased this product unintentionally, please replace with a consumer version.

Safety Symbols

Symbol Type Description

Warning An important instruction or set of important instructions that can lead to severe injury or even death

if not followed.

Caution An instruction or set of instruction that can lead to personal injury and/or property damage if not

followed.

In-Text

Symbol Type Description

Caution Important information concerning a specic function.

Note Useful information concerning a specic function.

Before reading this manual

Safety Precautions

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important Safeguards

1. Read Instructions

All the safety and operating instructions should be read before the

appliance is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future

reference.

3. Cleaning

Unplug this equipment from the wall outlet before cleaning it. Do not

use liquid aerosol cleaners. Use a damp soft cloth for cleaning.

4. Attachments

Never add any attachments and/or equipment without the approval

of the manufacturer as such additions may result in the risk of re,

electric shock or other personal injury.

5. Water and/or Moisture

Do not use this equipment near water or in contact with water.

6. Placing and Accessories

Do not place this equipment on an wall or ceiling that is not strong

enough to sustain the camera. The equipment may fall, causing

serious injury to a child or adult, and serious damage to the

equipment. Wall or shelf mounting should follow the manufacturer's

instructions, and should use a mounting kit approved by the

manufacturer.

This equipment and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

equipment and cart combination to overturn.

Do not place this equipment in an enclosed space. Sucient

ventilation is required to prevent an increase in ambient temperature

which can cause malfunction or the risk of re.

7. Power Sources

This equipment should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

type of power, please consult your equipment dealer or local power

company.

You may want to install a UPS (Uninterruptible Power Supply)

system for safe operation in order to prevent damage caused by an

unexpected power stoppage. Any questions concerning UPS, consult

your UPS retailer.

This equipment should be remain readily operable.

8. Power Cord

Operator or installer must remove power and TNT connections before

handling the equipment.

9. Lightning

For added protection for this equipment during a lightning storm,

or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the equipment due to lightning

and power-line surges. If thunder or lightning is common where the

equipment is installed, use a surge protection device.

10. Overloading

Do not overload wall outlets and extension cords as this can result in

the risk of re or electric shock.

11. Objects and Liquids

Never push objects of any kind through openings of this equipment

as they may touch dangerous voltage points or short out parts that

could result in a re or electric shock. Never spill liquid of any kind on

the equipment.

12. Servicing

Do not attempt to service this equipment yourself. Refer all servicing

to qualied service personnel.

13. Damage requiring Service

Unplug this equipment from the wall outlet and refer servicing to

qualied service personnel under the following conditions:

A. When the power-supply cord or the plug has been damaged.

B. If liquid is spilled, or objects have hit the equipment.

C. If the equipment has been exposed to rain or water.

D. If the equipment does not operate normally by following the

operating instructions, adjust only those controls that are covered

by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work

by a qualied technician to restore the equipment to its normal

operation.

E. If the equipment has been dropped, or the cabinet damaged.

F. When the equipment exhibits a distinct change in performance —

this indicates a need for service.

14. Replacement Parts

When replacement parts are required, be sure the service technician

has used replacement parts specied by the manufacturer or that

have the same characteristics as the original part. Unauthorized

substitutions may result in re, electric shock or other hazards.

15. Safety Check

Upon completion of any service or repairs to this equipment, ask the

service technician to perform safety checks to determine that the

equipment is in proper operating condition.

16. Field Installation

This installation should be made by a qualied service person and

should conform to all local codes.

17. Correct Batteries

Warning: Risk of explosion if battery is replaced by an incorrect type.

Replace only with the same or equivalent type.

Dispose of used batteries according to the instructions.

The battery shall not be exposed to excessive heat such as sunshine,

re or the like.

18. Tmra

A manufacturer’s maximum recommended ambient temperature

(Tmra) for the equipment must be specied so that the customer and

installer may determine a suitable maximum operating environment

for the equipment.

Before reading this manual

Warning: This product emits infrared light. Do not look into the IR

LED.

FCC Compliance Statement

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART

15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE

WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE

RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE

HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO

CAUSE HARMFUL INTERFERENCE, IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.

WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID

THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE

CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS.

WEEE (Waste Electrical & Electronic Equipment)

Correct Disposal of This Product

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household

wastes at the end of its working life. To prevent possible harm to the environment or human health from

uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote

the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government

oce, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This

product should not be mixed with other commercial wastes for disposal.

IDIS Co., Ltd. reserves all rights concerning this manual.

Use or duplication of this manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.

Contents of this manual are subject to change without prior notice for reasons such as functionality enhancements.

Registered Trademarks

IDIS is a registered trademark of IDIS Co., Ltd.

Other company and product names are registered trademarks of their respective owners.

This product contains software built partially on open-source content. Codes for the corresponding open-

source content are available for download. For more information, refer to the software CD (OpenSourceGuide\

OpenSourceGuide.pdf) or the open source guide accompanying this manual.

Table of Contents

Part 1 - Remote Setup........................................7

Camera Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Switching Protocols .......................................................................7

Remote Setup ...................................................................8

Quick Setup .....................................................................9

System..........................................................................9

General ...................................................................................9

Date/Time ...............................................................................10

User/Group ..............................................................................11

Network .......................................................................12

IP Address ...............................................................................12

FEN ......................................................................................13

Port/QoS.................................................................................14

Bandwidth Control .......................................................................15

Security..................................................................................16

IEEE 802.1X ..............................................................................17

Video ..........................................................................17

Camera ..................................................................................17

Streaming ...............................................................................22

Webcasting ..............................................................................23

MAT .....................................................................................23

Privacy Masking..........................................................................24

Audio ..........................................................................25

In/Out ...................................................................................25

Event Action ...................................................................25

Alarm out ................................................................................25

Email ....................................................................................26

Remote Callback .........................................................................26

Audio Alarm .............................................................................27

FTP Upload ..............................................................................27

Record...................................................................................29

Table of Contents

Event ..........................................................................31

Alarm In .................................................................................31

Motion Detection ........................................................................32

Face Detection ...........................................................................33

Tampering ...............................................................................34

System Event ............................................................................35

Part 2 - IDIS Web ............................................37

Web Live Mode.................................................................39

Web Search Mode ..............................................................41

Part 3 - Appendix ...........................................44

Setup Menu Tree (Remote Setup) ...............................................44

Index ..........................................................................45

Congure basic network camera settings and all other

system settings.

Screen images may vary depending on the model.

Camera Protocol

Camera supports DirectIP™ and IDIS protocols.

•DirectIP™ protocol:

- Using with a DirectIP™ NVR enables camera use

without the need to congure network settings.

- The DirectIP™ NVR also allows you to control all

camera settings directly from the NVR, without the

need for a computer.

For more information on conguring camera settings

from a DirectIP™ NVR, refer to the NVR’s operation

manual.

•IDIS protocol:

- Control the camera over the network from software

installed on a computer or a separate NVR.

- Ideal for using the camera over the network from a

remote location.

Switching Protocols

1 Launch the IDIS Discovery program and from the list,

select a camera whose protocol you wish to change.

2 Click on the Setup icon and then select Setup →

Protocol Setup.

•Alternatively, you can right-click on the mouse and

select Protocol Setup.

3 From the Protocol Setup screen, select the desired

protocol and then click OK.

4 This will activate the selected protocol. You can

check each camera’s protocol on the IDIS Discovery

program.

This operation manual was written based on the IDIS

protocol use.

Part 1 - Remote Setup

Remote Setup

1 Launch the IDIS Discovery program and then from

the main screen, select a network camera whose

settings you wish to change.

2 Click on the Setup icon.

3 Select Remote Setup from the Setup menu to load

the Remote Setup screen. Alternatively, you can

select Network Camera from the main screen and

then right-click to access the Remote Setup screen.

System settings can also be changed using a remote

program.

From the Remote Setup screen, select the

menu on the left to display the current settings.

Select an option under the menu to change the

corresponding settings. Once you have changed

the settings, click OK to apply the settings and exit

from the Remote Setup screen.

Part 1 - Remote Setup

Quick Setup

Quick Setup allows you to set up System, Network,

Video, and other basic settings needed for camera use.

System

Change the camera’s system information, add users/

groups, and/or import/export settings.

General

•Language: Select the language you wish to use for

remote setup.

•Name: Enter a name for the camera. (Up to 31

alphanumeric characters, including spaces)

•Note: Enter a description for the camera.

•HW Version/SW Version: Indicates the camera’s

hardware and software versions.

•Miscellaneous

- ONVIF Protocol: Select to enable ONVIF protocol

use. However, ONVIF Protocol is available only

to users belonging to the standard user groups

(Administrator, Operator, and User). When you

have connected to the camera by using the ONVIF

protocol, only the currently enabled streams or

events are supported and you cannot change it.

There may be some more settings that cannot be

changed, too. If you want to change those settings,

connect to the camera by using the IDIS Discovery

program.

Part 1 - Remote Setup

•Setup

- Load Default Setup: Restores all settings other

than Date/Time to their factory defaults. Select

Include Network Setup to load default network

settings as well. For more information on network

setup, refer to the Network on page 12.

- Import Setup: Open a setup le and apply its

settings to the camera. Click on the button and

then select a setup le. Select Include Network

Setup to apply the le’s network setup settings (exc.

FEN). For more information on network setup, refer

to the Network on page 12.

- Export Setup: Export the current settings as a .dat

le. Click on the button and then enter a le name.

•Load Default Setup and Import Setup options

are available only to users belonging to the

Administrator group.

•When applying the settings of a setup le, do not

select the Include Network Setup option if the

network settings contained in the selected le is

currently being used by a dierent camera. Doing

so can interfere with establishing a connection

with the other camera.

•If IP Address, Admin Port, and/or SSL settings

have been changed, Remote Setup will terminate

after applying the current settings.

Date/Time

•Date/Time: Change the camera’s date/time settings

and display formats and congure the time zone and

daylight saving time settings. Click Apply to apply the

changes right away.

•Time Sync

- Automatic Sync: Select to synchronize the system’s

time with the time server at a specied interval.

Enter the time server’s IP address or domain name

and then specify the interval. If the time server

is FEN-enabled, select the Use FEN option and

then enter the time server’s name instead of its IP

address or domain name.

- Run as Server: Select to run the camera as a

time server. Other devices will then be able to

synchronize its time setting with this camera’s time

setting.

If you wish to enter a domain name instead of an

IP address for the Time Server setting, DNS server

must be congured during Network setup. If you

wish to enter a server name instead of an IP address

or a domain name, the Use FEN option must be

enabled during Network setup.

Indice

Altri manuali Idis Telecamera di rete

Idis

Idis DC-F1111 Manuale utente

Manuali Telecamera di rete popolari di altre marche

Airsight

Airsight XX36A Manuale utente

Canon

Canon VB-H43 Manuale utente

Digimerge

Digimerge DNB6300V Manuale utente

Axis

Axis Q1604-E Manuale utente

Vivotek

Vivotek SD9363-EHL Manuale utente

Axis

Axis M1065-LW Manuale utente

Surveon

Surveon CAM4210 Manuale utente

Axis

Axis P1435-E Manuale utente

Surveon

Surveon CAM3260 Manuale utente

Edimax

Edimax IC-5150W Manuale utente

Edimax

Edimax IC-3115W Manuale utente

Asoni

Asoni CAM741H Manuale utente

TRENDnet

TRENDnet TV-IP562WI Manuale utente

Asoni

Asoni CAM628M Manuale utente

TRENDnet

TRENDnet TV-IP762IC Manuale utente

Syscom Video

Syscom Video PT Mini Dome Manuale utente

Samsung

Samsung SND-7080 Manuale utente

Vivotek

Vivotek FE8181 Manuale utente